Integration of Printed Electronics in Polymer Injection Moulding: Materials, Process Challenges, and Simulation Insights

International Journal of Precision Engineering and Manufacturing-Green Technology

2026 | journal-article

Valorization of Waste Powder from Selective Laser Sintering: An Opportunity for the Circular Economy

Physchem

2026 | journal-article

Mechanical Characterization of CNT/PLA Parts via FFF Additive Manufacturing

Polymer Engineering & Science

2026 | journal-article

Effect of Polymer Reprocessing on the Bending Behaviour of Thermoresponsive multi-material 4D Printed Structures

TEchMA 2025 – new frontiers in mechanical engineering

2025 | conference-poster

New sustainable metrics in life cycle assessment: the case study of an electrical power transformer

"From Less Bad to Good Enough", Annual conference hosted by the Centre for Absolute Sustainability at DTU, Dinamarca

2025 | conference-paper

Feasibility of Expanded Polystyrene Recycling via CBA-Assisted Extrusion and Underwater Pelletization

International Symposium on Innovation in Polymer Applications 2025 Aveiro, Portugal 25 - 26 June 2025

2025 | conference-abstract

Effect of material reprocessing on the thermo-induced bending of 4D printed polylactic acid/thermoplastic polyurethane structures

Research Summit 2025

2025 | conference-abstract

Effect of Material Reprocessing on the Thermo-induced Bending of 4D Printed PLA/TPU

Encontro de Ciência 2025

2025 | conference-poster

Closed-loop PLA reprocessing: using an artificial neural network to classify tensile strength evolution

International symposium on Innovation in Polymer Applications (IPA 25)

2025 | conference-abstract

Graphene-based paintable coating for an alternative large power transformer electrostatic ring structure

International symposium on Innovation in Polymer Applications (IPA 25)

2025 | conference-abstract

Mechanical Metamaterials Fabricated via Additive Manufacturing: A Review of Multi-Material Strategies, Optimization Methods, and Engineering Applications

Advanced Engineering Materials

2025 | journal-article

Improving the performance of In-Mould Electronics manufacturing via numerical simulation

Innovation in Polymer Applications (IPA)

2025 | conference-abstract

On the morphing behavior of 4D printed PLA-based parts

28th International ESAFORM Conference on Material Forming

2025 | conference-paper

High-density polyethylene reinforced with carbon dots for improved processing cycles and recyclability traceability

Composites Part A: Applied Science and Manufacturing

2025 | journal-article

Active learning approaches for lecturing advanced manufacturing technologies

Academic Success in Higher Education 2025 (CASHE 2025)

2025 | conference-abstract

HDPE:CDs recycled composites: a new approach for recycled polymers separation

INOV.AM INTERNATIONAL CONFERENCE

2024 | conference-poster

Predictive modeling of morphing behavior in 4D printed PLA-based polymers

INOV.AM International Conference - Shaping Tomorrow

2024 | conference-abstract

A new approach to multi-material metamaterials via fused filament fabrication

INOV.AM - International Conference on Additive Manufacturing

2024 | conference-abstract

Development of an underwater pelletizer for obtaining extruded recycled expanded polystyrene beads

4th International Conference on Polymer Process Innovation (PPI)

2024 | conference-abstract

Enabling Closed Loop Plastics Processing

International Conference on Polymer Process Innovation (fourth edition) PPI 2024

2024 | conference-abstract

Optimization and statistical analysis on mechanical, thermal, wear and water-absorption characteristics of fragrant screwpine fiber-reinforced polymer biocomposites

Iranian Polymer Journal

2024 | journal-article

The role of processing conditions on the density, morphology, and mechanical properties of extruded polystyrene foams

Reseach Summit 2024

2024 | conference-abstract

Advanced design of meta-structures through additive manufacturing: a review

Research Summit 2024 - Research Forum of the University of Aveiro

2024 | conference-abstract

Recycled high density polyethylene composites: CDs as an optical tool for recycled polymer

Research Summit 2024

2024 | conference-paper

Chemical blowing agent-assisted foam extrusion: from processing to morphology and mechanical efficacy

Ciência 2024 - Encontro com a Ciência e Tecnologia em Portugal

2024 | conference-poster

Effect of mechanical recycling on structural, mechanical and optical properties of high-density polyethylene (HDPE)

6th International Conference on Nanomaterials Science and Mechanical Engineering

2024 | conference-poster

Estudo das propriedades mecânicas de HDPE reciclado com incorporação de pontos quânticos de carbono

Ciência 2024

2024 | conference-poster

Conceção e desenvolvimento de uma impressora híbrida de fabrico por filamento polimérico e filamento metálico de baixo ponto de fusão

Ciência 2024

2024 | conference-poster

How can poly(lactic acid) be reprocessed more times with minimal quality loss?

Research Summit 2024

2024 | conference-abstract

A comprehensive study on mechanical recycling of HDPE composites

TEchMA2024 – 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2024 | conference-paper

Chain extension of PLA reprocessed multiple-times for FFF

TEchMA2024 – 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2024 | conference-abstract

Recycled HDPE: An investigation on CDs contribution to improve mechanical performance

MecaNano 2nd General Meeting

2024 | conference-poster

Influence of 3D-printing deposition parameters on crystallinity and morphing properties of PLA-based materials

Progress in Additive Manufacturing

2024 | journal-article

Carbon Dots: A Bright Future as Anticounterfeiting Encoding Agents

Small

2024 | journal-article

In Search of a More Balanced Engineering Curriculum: The Perspective of Students, Teachers, Alumni and Employers

Trends in Higher Education

2024 | journal-article

Life Cycle Analysis of Polymer Nanocomposites

Chemical Physics of Polymer Nanocomposites: Processing, Morphology, Structure, Thermodynamics, Rheology

2024 | book-chapter

Towards an Automatic Strategy for Conformal Cooling Design

2024 | book-chapter

Controlling Morphing Behavior in 4D Printing: A Review About Microstructure and Macrostructure Changes in Polylactic Acid

3D Printing and Additive Manufacturing

2023 | journal-article

The influence of 3D printing parameters on the control of morphing behavior in 4D printing

8th European Congress on 3D Printing & Additive Manufacturing

2023 | conference-abstract

Reprocessed PLA filament extrusion: In-process degradation assessment and mitigation through a soft sensor

8th European Congress on 3D Printing & Additive Manufacturing

2023 | conference-abstract

Development of a functional prototype for recovery of recycled expanded polystyrene via extrusion

PPI 2023 - 3rd International Conference on Polymer Process Innovation

2023 | conference-abstract

Smart tags based on polylactic acid/ lanthanide-based metal-organic framework composites

Research Summit 2023

2023 | conference-paper

Enhancing the functionality and customization of artificial lawns with photoluminescent additives and backlight systems

Research Summit 2023

2023 | conference-abstract

Continuous manufacturing of bio-based and biodegradable density-graded plastic foams

Ciência 2023 - Encontro com a Ciência e Tecnologia em Portugal

2023 | conference-poster

Current and future challenges for Engineering Education: voices from students, alumni, teachers and employers

2023 5th International Conference of the Portuguese Society for Engineering Education (CISPEE)

2023 | conference-paper

Effects of 1,3-phenylene-bis-oxazoline (PBO) chain extender on the rheological and thermal properties of reprocessed polylactic acid (PLA)

Science Meeting 2023: ¿Science and the Ocean Beyond the Horizon

2023 | conference-poster

Enhancing engineering education by means of the promotion of entrepreneurial mindsets and attitudes for societal challenges

2023 5th International Conference of the Portuguese Society for Engineering Education (CISPEE)

2023 | conference-paper

Plastic waste as bright CD based anticounterfeit tracers

Ciência 2023

2023 | conference-poster

Otimização estrutural de moldes de injeção através de ferramentas de machine learning

Molde

2023 | magazine-article

Reprocessed PLA degradation assessment and mitigation for closed-loop FFF filament extrusion

Research Summit 2023

2023 | conference-abstract

Luminescent performance of polylactic acid/ lanthanide-based metal-organic framework composites

European Materials Research Society 2023 Spring Meeting

2023 | conference-poster

Non-destructive reprocessed PLA degradation evaluation and control in FFF filament extrusion

TEchMA: 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2023 | conference-abstract

4D Printing: Can additives influenece the morphing performance of PLA-based materials?

TEchMA2023: 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2023 | conference-abstract

Instrumentation and In-mould Data Acquisition System for Injection Moulding Process

2023 4th International Conference on Artificial Intelligence, Robotics and Control (AIRC)

2023 | conference-paper

InovDesign - A self assessment tool for product design and development

TEchMA2023 ¿ 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2023 | conference-abstract

Lightweight biocomposites for a new generation of circular economy-enabled visual communication boards

TEchMA 2023 ¿ 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2023 | conference-abstract

Color-customizable photoluminescent polyethylene composites

Materiais 2023

2023 | conference-abstract

Thermoplastic starch/PLA/CaCO3-based biocomposite for a multifunctional and circular economy-enabled visual communication board

Materiais 2023 ¿ XXI Congresso da Sociedade Portuguesa de Materiais and XII International Symposium on Materials

2023 | conference-abstract

Development of an Open-Source Injection Mold Monitoring System

Sensors

2023 | journal-article

Biodegradable luminescent QR codes based on PLA/LnMOF hybrid composites

VIII Annual Meeting I3N 2023

2023 | conference-poster

OpenMMS-T4G

2023 | software

Improving the environmental performance of a plastic toilet cistern by reintroducing reprocessed plastic

MATERIAIS 2023-XXI Congresso da Sociedade Portuguesa de Materiais, and XII International Materials Symposium

2023 | conference-paper

Development and Mechanical Characterization of Short Curauá Fiber-Reinforced PLA Composites Made via Fused Deposition Modeling

Polymers

2022 | journal-article

Photoluminescent Polyethylene -Eu(DBM)3Phen and -Tb(Sal)3 composites filament fabrication and characterization

2nd International Conference on Polymer Process Innovation - PPI

2022 | conference-abstract

Influence of 3D printing parameters on PLA's morphing ability: from design of experiments to practical work

2nd International Conference on Polymer Process Innovation - PPI

2022 | conference-abstract

Challenge Based Learning plus (CBL+) – Aplicação da metodologia em grandes grupos de Engenharia

CNaPPES 2022 - 8º Congresso Nacional de Práticas Pedagógicas no Ensino Superior

2022 | conference-paper

Continuous processing of density graded and rigid thermoplastic bio-foams

Research Summit 2022 - Research Forum of the University of Aveiro

2022 | conference-abstract

Optimization to Assist Design and Analysis of Temperature Control Strategies for Injection Molding—A Review

Materials

2022 | journal-article

Prediction of mechanical properties of parts produced from reprocessed thermoplastics within an additive manufacturing framework

TEchMA2022: 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2022 | conference-abstract

Using machine learning to predict mechanical properties of reprocessed PLA

Ciência 2022 Encontro com a Ciência e Tecnologia em Portugal

2022 | conference-poster

Coupling tool to assist mold design and engineering during hybrid fabrication

Ciência 2022

2022 | conference-poster

Development of predictive tools for controlling the polymers morphing behavior in 4D printing

Encontro de Ciência e Tecnologia em Portugal

2022 | conference-poster

Development of sustainable visual communication boards based on circular economy principles and environmental performance evaluation

TEchMA2022 ¿ 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2022 | conference-abstract

Life Cycle Analysis of a plastic toilet cistern - tradition processing vs. recycled processing

TechMA2022 ¿ 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2022 | conference-abstract

Interfacial behaviors of continuous carbon fiber reinforced polymers manufactured by fused filament fabrication: A review and prospect

International Journal of Material Forming

2022 | journal-article

Reprocessability of PLA through Chain Extension for Fused Filament Fabrication

Journal of Manufacturing and Materials Processing

2022 | journal-article

Controlling the properties of parts 3D printed from recycled thermoplastics: A review of current practices

Polymer Degradation and Stability

2022 | journal-article

Applying Gamification Strategies to Create Training in Lean Methodologies

2022 | book-chapter

Generative design to model metamaterial devices using reprocessed plastics

Encontro de Ciência e Tecnologia em Portugal

2022 | conference-poster

Desenvolvimento de um sistema em open-sorce para monitorização do molde de injeção

12º Congresso Nacional de Mecânica Experimental – CNME2020

2021 | conference-paper

Coupling tool to assist design and engineering of mold temperature control systems by topology optimization and hybrid fabrication

Ciência 2021

2021 | conference-poster

4D Printing: Development of fused filament fabrication structures with the ability to shape-shift

TEchMA2021 – 4rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions,

2021 | conference-abstract

A STUDY ON THE ALIGNMENT OF EXPECTATIONS BETWEEN HEI AND SOCIETY, USING ENGINEERING EDUCATION AS A CASE STUDY

2020 | conference-paper

Polymeric foams from recycled thermoplastic poly(ethylene terephthalate)

Journal of Cellular Plastics

2020 | journal-article

“Só para ensinar” ou “mais para aprender”? Reflexões, entre pares, sobre as (próprias) práticas pedagógicas no ensino superior: Análise das perceções dos professores sobre um programa de observação por pares

Indagatio Didactica

2020 | journal-article

Economia Circular? O que temos a ver com isso?

O Molde

2020 | magazine-article

Industrial challenge assignment in curricular context

Millenium – Journal of Education, Technologies, and Health

2020 | journal-article

Chemical Changes of Graphene Oxide Thin Films Induced by Thermal Treatment under Vacuum Conditions

Coatings

2020 | journal-article

Development of 4D structures for custom bolus production for external radiotherapy

TEchMA2020 – 3rd International Conference on Technologies for the Wellbeing and Sustainable

2020 | conference-abstract

Is it “just to teach” or is it “more to learn”? Reflections, among peers, about (their own) pedagogical practices in higher education: Analysis of teachers’ perceptions about a peer observation of teaching program

2020 | journal-article

Graphene Based Sensors for Air Quality Monitoring – Preliminary Development Evaluation

Journal of Coating Science and Technology

2019 | journal-article

Economia Circular

Diário de Aveiro – 1500 Maiores Empresas 2019

2019 | magazine-article

Está a nascer a Sociedade 5.0

Robótica

2019 | magazine-article

Enabling closed loop additive manufacturing through an on-demand feedstock material customization system

2nd International Conference of TEMA: Mobilizing Projects

2019 | conference-abstract

Metal Additive Manufacturing Cycle in Aerospace Industry: A Comprehensive Review

Journal of Manufacturing and Materials Processing

2019 | journal-article

Eco-design and Eco-efficiency Competencies Development in Engineering and Design Students

Education Sciences

2019 | journal-article

Impacts of ocean acidification on carboxylated carbon nanotube effects induced in the clam species Ruditapes philippinarum

Environmental Science and Pollution Research

2019 | journal-article

The influence of Climate Change on the fate and behavior of different carbon nanotubes materials and implication to estuarine invertebrates

Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology

2019 | journal-article

The influence of simulated global ocean acidification on the toxic effects of carbon nanoparticles on polychaetes

Science of The Total Environment

2019 | journal-article

Produção Flexível na Indústria de Moldes

O Molde

2019 | magazine-article

Toxicity evaluation of carboxylated carbon nanotubes to the reef-forming tubeworm Ficopomatus enigmaticus (Fauvel, 1923)

Marine Environmental Research

2019 | journal-article

A Method for the Prediction of Mechanical Properties of Parts Produced by Fused Filament Fabrication

CMN2019 – Congress on Numerical Methods in Engineering

2019 | conference-paper

Assessing Entrepreneurship and Innovation in Higher Education Institutions: The ’HEInnovate’ Initiative at the Universidade de Aveiro, Portugal

Contemporary Drivers of Local Development

2019 | book-chapter

Polymer Matrix Nanocomposites for 3D Printing

Progress in Digital and Physical Manufacturing

2019 | book-chapter

Does the exposure to salinity variations and water dispersible carbon nanotubes induce oxidative stress in Hediste diversicolor?

Marine Environmental Research

2018 | journal-article

Using recycled polymers for fused filament fabrication applications

8th Bi-Annual PMI2018 International Conference on Polymers and Moulds Innovations

2018 | conference-paper

Novas perspetivas no desenvolvimento de novos produtos através de fabrico aditivo

UD18 - 7º Encontro de Doutoramentos em Design

2018 | conference-paper

The influence of salinity on the effects of Multi-walled carbon nanotubes on polychaetes

Scientific Reports

2018 | journal-article

Effects of multi-walled carbon nanotube materials on Ruditapes philippinarum under climate change: The case of salinity shifts

Aquatic Toxicology

2018 | journal-article

HFCVD Diamond-Coated Mechanical Seals

Coatings

2018 | journal-article

An overview of graphene materials: Properties, applications and toxicity on aquatic environments

Science of the Total Environment

2018 | journal-article

Aumento da produtividade de uma linha de enchimento de aerossóis

2018 | dissertation-thesis

Changing higher education one teacher at a time: book of abstracts of the Third International Conference of the Portuguese Society for Engineering Education

UA Editora

2018 | book

Desenvolvimento de um novo produto à base de PET

2018 | dissertation-thesis

International Conference on Nanomaterials Science and Mechanical Engineering: book of abstracts

UA Editora

2018 | book

Otimização e flexibilização de um produto de gamificação

2018 | dissertation-thesis

Redução dos custos em matéria-prima na célula de insuflação de uma fábrica de embalagens plásticas

2018 | dissertation-thesis

TEMA: livro de serviços

UA Editora

2018 | book

Towards Excellence in Engineering Education The profile of Higher Education Teachers on Engineering Programs

2018 | conference-paper

Toxic effects of multi-walled carbon nanotubes on bivalves: Comparison between functionalized and nonfunctionalized nanoparticles

Science of the Total Environment

2018 | journal-article

Excelência no Ensino de Engenharia na UA - Desafio técnico-societal integrador

Teaching Day ‘UA

2017 | conference-poster

Methodologies for Engineering Learning and Teaching (MELT)

Handbook of Research on Entrepreneurial Development and Innovation Within Smart Cities

2017 | book-chapter

Análise do envelhecimento acelerado de polímeros

2017 | dissertation-thesis

Charge injection in large area multilayer graphene by ambient Kelvin probe force microscopy

Applied Materials Today

2017 | journal-article

Desenvolvimento de linha de mobiliário de quarto de banho adaptável e sustentável: representar a flexibilidade e a tecnologia

2017 | dissertation-thesis

Desenvolvimento de um produto para gamificação de formação em metodologias de trabalho Lean

2017 | dissertation-thesis

Development of a nanopaint for polymeric auto components

Micro and Nanomanufacturing

2017 | book

Diamond-coated fiber Bragg grating through the hot filament chemical vapor process for chemical durability improvement

Applied Optics

2017 | journal-article

Incorporation of fiber bragg sensors for shape memory polyurethanes characterization

Sensors (Switzerland)

2017 | journal-article

Inovação e desenvolvimento de equipamento de hotelatia

2017 | dissertation-thesis

Mechanical testing of micromolded plastic parts by nanoindentation

Polymer Engineering and Science

2017 | journal-article

Methodologies for Engineering Learning and Teaching (MELT): An Overview of Engineering Education in Europe and a Novel Concept for Young Students

Handbook of Research on Entrepreneurial Development and Innovation within Smart Cities

2017 | book-chapter

Physiological and biochemical impacts of graphene oxide in polychaetes: The case of Diopatra neapolitana

Comparative Biochemistry and Physiology Part - C: Toxicology and Pharmacology

2017 | journal-article

Physiological and biochemical responses of two keystone polychaete species: Diopatra neapolitana and Hediste diversicolor to Multi-walled carbon nanotubes

Environmental Research

2017 | journal-article

Plasma Treated Active Carbon for Capacitive Deionization of Saline Water

Journal of Nanomaterials

2017 | journal-article

Preface to the special issue on “The 1st international conference on Advanced Energy Materials (AEM2016), 12–14 September 2016, Surrey, England”

International Journal of Hydrogen Energy

2017 | journal-article

The impacts of emergent pollutants on Ruditapes philippinarum: biochemical responses to carbon nanoparticles exposure

Aquatic Toxicology

2017 | journal-article

The impacts of seawater acidification on: Ruditapes philippinarum sensitivity to carbon nanoparticles

Environmental Science: Nano

2017 | journal-article

Mechanical testing of micro moulded parts by nanoindentation

7th International Conference PMI2016

2016 | conference-paper

Análise do comportamento mecânico de componentes produzidos por fabrico por filamento fundido

2016 | dissertation-thesis

Aplicação e ensaio de filmes finos de diamante em vedantes mecânicos

2016 | dissertation-thesis

Graphene oxide nanocomposites for potential wearable solar cells - A review

Journal of Materials Research

2016 | journal-article

Methodologies for Engineering Learning and Teaching (MELT) approach: A way to bring young people to science (and science to young people)

CISPEE 2016 - 2nd International Conference of the Portuguese Society for Engineering Education, Proceedings

2016 | conference-paper

Nanocompósitos de matriz polimérica para impressão 3D

2016 | dissertation-thesis

Open think-tank on engineering education: A forum of "face-to-face" debate between stakeholders

CISPEE 2016 - 2nd International Conference of the Portuguese Society for Engineering Education, Proceedings

2016 | conference-paper

Optimization of nanopaint with metallic touch for polymeric auto components

2016 | dissertation-thesis

Preface to the special issue on “1st International Conference on Hydrogen Energy, 20–22 July 2015, Aveiro, Portugal”

International Journal of Hydrogen Energy

2016 | journal-article

Tratamento de superfície com plasma de estruturas em material compósito para a indústria aeronáutica

2016 | dissertation-thesis

Advanced nanomaterials for hydrogen energy

International Journal of Hydrogen Energy

2015 | journal-article

Centre for Mechanical Technology and Automation – TEMA – Activity report

2015 | report

Characterization of Graphene Oxide Coatings onto Optical Fibers for Sensing Applications

Materials Today: Proceedings

2015 | conference-paper

Editorial

Materials Today: Proceedings

2015 | conference-paper

High-rate sputtering deposition of high- and low-refractive index films from conductive composites

MRS Communications

2015 | journal-article

Industrial Applications of Nanoparticles - A Prospective Overview

Materials Today: Proceedings

2015 | conference-paper

Modelação e simulação numérica de ferramenta moldante instrumentada com sensores de fibra ótica

2015 | dissertation-thesis

Nanodiamond Coated Glass as a Protective Layer in Solar Cells

Materials Today: Proceedings

2015 | conference-paper

Nanostructured Coatings in Micromoulding Injection - A Case Study

Materials Today: Proceedings

2015 | conference-paper

Roteiro nacional de infraestruturas de investigação de interesse estratégico (RNIE) – relatório de análise de maturidade. TEMA – Centro de Tecnologia Mecânica e Automação

2015 | report

Simultaneous regeneration of seed FBGs during the HFCVD diamondgrating coating process and its thermal monitoring

Proceedings of SPIE - The International Society for Optical Engineering

2015 | conference-paper

Utilização de redes de Bragg em fibras óticas para caracterização da memória de forma de poliuretano reforçados com nanotubos de carbono

Congresso Nacional de Mecânica Experimental CNME 2014

2014 | conference-paper

Conductive ZnO:Zn Composites for High-Rate Sputtering Deposition of ZnO Thin Films

Journal of Electronic Materials

2014 | journal-article

Diamond-like carbon (DLC) films as electrochemical electrodes

Diamond and Related Materials

2014 | journal-article

Optimisation of tailored diamond coating conditions onto optical fibres through the Taguchi method

2014 | journal-article

Regeneration of FBGs during the HFCVD diamond-fiber coating process

Proceedings of SPIE - The International Society for Optical Engineering

2014 | conference-paper

Revestimentos PVD em microcavidades para moldação por injeção

2014 | dissertation-thesis

Thermal monitoring of the thermoplastic injection molding process with FBGs

Proceedings of SPIE - The International Society for Optical Engineering

2014 | conference-paper

Análise do fluxo polimérico em micro cavidades revestidas com diamante

2013 | dissertation-thesis

Aplicação de sensores FBG em modelos para injeção

2013 | dissertation-thesis

Diamond and other carbon related materials applications in photovoltaic solar cells

IEEE International Conference on Electro Information Technology

2013 | conference-paper

Estudo de revestimento em materiais para dispositivos biomecânicos

2013 | dissertation-thesis

In focus on polymer behavior

Polymer International

2013 | journal-article

Thermal monitoring of the diamond deposition process using regenerated FBG

Proceedings of SPIE - The International Society for Optical Engineering

2013 | conference-paper

Advanced coating systems towards the analysis of polymer flow within microcavities

5th International Conference PMI2012

2012 | conference-paper

Analysis of the mechanical properties of compressed earth block masonry using the sugarcane bagasse ash

2012 | journal-article

Authenticity of the leaders and reactions of the led

2012 | dissertation-thesis

Microinjection Molding of Enhanced Thermoplastics

Thermoplastic Elastomers

2012 | book-chapter

Nanocrystalline diamond coating on non-planar silicon substrates

Journal of Nanoscience and Nanotechnology

2012 | journal-article

Nanocrystalline diamond coatings for mechanical seals applications

2012 | journal-article

Nanodiamond coated Bragg gratings for sensing applications

Proceedings of SPIE - The International Society for Optical Engineering

2012 | conference-paper

Selected peer-reviewed articles from international conference on advanced nano materials (ANM 2010)

2012 | journal-article

The deposition of nanocrystalline diamond by HFCVD in different materials

Journal of Nano Research

2012 | journal-article

The effect of megavoltage radiation on polymeric materials to be used in biomedical devices

2012 | journal-article

Tuning the conditions for the deposition of nanocrystalline diamond by hot filament chemical vapour deposition

2012 | journal-article

u-injection molding of enhanced thermoplastics

Research Day 2012

2012 | conference-poster

Comparative study of nanocrystalline diamond deposition on WC-Ni and WC-Co substrates

Journal of Nanoscience and Nanotechnology

2011 | journal-article

Evaluation of diamond coatings on optical fibre sensors for biological use

Journal of Nanoscience and Nanotechnology

2011 | journal-article

Performance of nanocrystalline diamond coated micromolding tools

Materials Science and Technology Conference and Exhibition 2011, MS and T'11

2011 | conference-paper

Insertos para micro-moldação de termoplásticos por injecção

2010 | dissertation-thesis

Optimização do sistema MPCVD para deposição de filmes de diamante

2010 | dissertation-thesis

Revestimentos de diamante em fibras ópticas

2010 | dissertation-thesis

On the suitability of the conventional injection moulding process for micro featured parts replication - a doe approach

ICIT&MPT 2009

2009 | conference-paper

Adaptação das ferramentas moldantes a sistemas de microinjecção

2009 | dissertation-thesis

CVD diamond-coated steel inserts for thermoplastic mould tools-Characterization and preliminary performance evaluation

Journal of Materials Processing Technology

2009 | journal-article

Erratum to "Time-modulated chemical vapour deposition diamonf on mould making 2738 steel" [Vacuum 82 (2008) 1346-1349] (DOI:10.1016/j.vacuum.2008.03.041)

Vacuum

2009 | journal-article

Numerical Simulation of a PBT Component with Molded-in Metal Insert

International Conference PMI2008

2008 | conference-paper

Carbon-based coatings for the modern plastics industry

2008 | dissertation-thesis

Diamond coatings on 3D structured steel

Diamond and Related Materials

2008 | journal-article

Hydrogen adsorption onto nickel modified carbon nanotubes

2008 | journal-article

Nanocrystalline diamond on SiO2 fiber: A new class of hybrid material

2008 | journal-article

Performance of sub-micron diamond films coated on mould inserts for plastic injection moulding

Journal of Materials Science

2008 | journal-article

Performance of sub-micron diamond films coated on mould inserts for plastic injection moulding

JOURNAL OF MATERIALS SCIENCE

2008 | journal-article

Time-modulated chemical vapour deposition diamonf on mould making 2738 steel

2008 | journal-article

Synthesis of highly oriented carbon nanotube thin films by nickel functionalisation

Diamond and Related Materials

2007 | journal-article

Synthesis of highly oriented carbon nanotube thin films by nickel functionalisation

DIAMOND AND RELATED MATERIALS

2007 | journal-article

Diffusion of critical elements in steel during thermal treatments in a diamond chemical vapour deposition atmosphere

Diffusion in Solids and Liquids

2006 | book

Diffusion of critical elements in steel during thermal treatments in a diamond chemical vapour deposition atmosphere

Defect and Diffusion Forum

2006 | journal-article

Nitrogen and hydrogen related infrared absorption in CVD diamond films

Thin Solid Films

2006 | journal-article

Nitrogen and hydrogen related infrared absorption in CVD diamond films

THIN SOLID FILMS

2006 | journal-article

Time-modulated CVD process Optimised using the Tagychi method

Surface Engineering - Proceedings of the 4th International Surface Engineering Conference

2006 | conference-paper

Time-modulated CVD process optimized using the Taguchi method

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

2006 | journal-article

Quantitative analysis of hydrogen in chemical vapor deposited diamond films

Diamond and Related Materials

2005 | journal-article

Quantitative analysis of hydrogen in chemical vapor deposited diamond films

DIAMOND AND RELATED MATERIALS

2005 | journal-article

Artificial aging and shear deformation behaviour of 6022 aluminium alloy

International Journal of Plasticity

2004 | journal-article

Artificial aging and shear deformation behaviour of 6022 aluminium alloy

INTERNATIONAL JOURNAL OF PLASTICITY

2004 | journal-article

Deposition of nanocrystalline diamond and titanium oxide coatings onto pyrolytic carbon using CVD and sol-gel techniques

Diamond and Related Materials

2004 | journal-article

Deposition of nanocrystalline diamond and titanium oxide coatings onto pyrolytic carbon using CVD and sol-gel techniques

DIAMOND AND RELATED MATERIALS

2004 | journal-article

Optimisation of the new time-modulated CVD process using the Taguchi method

Thin Solid Films

2004 | journal-article

Optimisation of the new time-modulated CVD process using the Taguchi method

THIN SOLID FILMS

2004 | journal-article

Modulating CH4 flow during the fabrication of improved CVD diamond coatings

SURFACE TREATMENT VI

2003 | book

Modulating CH⁴ flow during the fabrication of improved CVD diamond coatings

Computational and Experimental Methods

2003 | conference-paper

Nanocrystalline diamond films deposited using a new growth regime

Materials Science and Technology

2003 | journal-article

Nanocrystalline diamond films deposited using a new growth regime

MATERIALS SCIENCE AND TECHNOLOGY

2003 | journal-article

Promoting secondary nucleation using methane modulations during diamond chemical vapor deposition to produce smoother, harder, and better quality films

Journal of Materials Research

2003 | journal-article

Promoting secondary nucleation using methane modulations during diamond chemical vapor deposition to produce smoother, harder, and betterquality films

JOURNAL OF MATERIALS RESEARCH

2003 | journal-article

Role of substrate temperature during diamond film growth using the newly developed time-modulated chemical vapor deposition process

Journal of Materials Science Letters

2003 | journal-article

Role of substrate temperature during diamond film growth using the newly developed time-modulated chemical vapor deposition process

JOURNAL OF MATERIALS SCIENCE LETTERS

2003 | journal-article

Surface engineering of WC-Co used in dental tools technology

MATERIALS SCIENCE AND TECHNOLOGY

2003 | journal-article

Surface engineering of WC-Co used in dental tools technology

Materials Science and Technology

2003 | journal-article