Geometry Optimisation of a Wave Energy Converter

Energies

2025 | journal-article

A millimetre-scale capacitive biosensing and biophysical stimulation system for emerging bioelectronic bone implants

Journal of The Royal Society Interface

2024 | journal-article

Author Correction: Capacitive interdigitated system of high osteoinductive/conductive performance for personalized acting-sensing implants

npj Regenerative Medicine

2024 | journal-article

Code generation for embedded predictive control of gas water heaters

Science and Technology for the Built Environment

2024 | journal-article

Embedded Model Predictive Control of Tankless Gas Water Heaters to Enhance Users’ Comfort

Machines

2023 | journal-article

Evaluation of the Injection Mold Performance Through the In-Situ Instrumentation and Data Acquisition System

TEchMA 2023¿ 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2023 | conference-abstract

Instrumentation and In-mould Data Acquisition System for Injection Moulding Process

2023 | conference-paper

Development of an Open-Source Injection Mold Monitoring System

Sensors

2023 | journal-article

OpenMMS-T4G

2023 | software

Study of a Passive Orthosis for Reducing the Load Transfer in the Hip Joint

Prosthesis

2022 | journal-article

The Load Shifting Potential of Domestic Refrigerators in Smart Grids: A Comprehensive Review

Energies

2022 | journal-article

Automatic code generation for embedded model predictive control: application to a water heater

TEchMA2022 - 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2022 | conference-abstract

Integrating solar energy and Phase Change Materials for increased autonomy and reduced operating costs in chest freezers

TEchMA 2022¿ 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2022 | conference-abstract

Towards Self-Adaptability of Instrumented Electromagnetic Energy Harvesters

Machines

2022 | journal-article

Gain scheduling model predictive controller design for tankless gas water heaters with time-varying delay

Applied Thermal Engineering

2022 | journal-article

Embedded model predictive control of a tankless gas water heater via automatic code generation

Ciência 2022 ¿ Encontro Com a Ciência e Tecnologia Em Portugal

2022 | conference-poster

Instrumented electromagnetic generator: Optimized performance by automatic self-adaptation of the generator structure

Mechanical Systems and Signal Processing

2022 | journal-article

Multiscale Sensing of Bone-Implant Loosening for Multifunctional Smart Bone Implants: Using Capacitive Technologies for Precision Controllability

Sensors

2022 | journal-article

Virtual Test Bench for the Design of Control Strategies for Water Heaters

Journal of Thermal Science and Engineering Applications

2022 | journal-article

Cosurface capacitive electrical stimulation fosters neuritogenic signaling

SPN congress

2021 | conference-paper

Desenvolvimento de um sistema em open-sorce para monitorização do molde de injeção

12º Congresso Nacional de Mecânica Experimental – CNME2020

2021 | conference-paper

Desenvolvimento de ortótese para redução de carga na articulação da anca

9th Congresso Nacional de Biomecânica (CNB2021)

2021 | conference-paper

Plataforma de gestão da monitorização do estado da fixação osso-implante em implantes instrumentados

9th Congresso Nacional de Biomecânica (CNB2021)

2021 | conference-paper

Sistema capacitivo interdigitado de elevado desempenho osteogénico para atuação-monitorização personalizada em implantes ativos instrumentados

9th Congresso Nacional de Biomecânica (CNB2021)

2021 | conference-paper

Sistema híbrido indutivo-capacitivo para operações de estimulação e monitorização em implantes instrumentados

9th Congresso Nacional de Biomecânica (CNB2021)

2021 | conference-paper

Towards an effective sensing technology to monitor micro-scale interface loosening of bioelectronic implants

Scientific Reports

2021 | journal-article

Adaptive Control Strategy for Efficient Conversion of Photovoltaic Energy to Mechanical Work: An Innovative Scheme for Maximum Power Point Tracking and Optimal Load Modulation [ABSTRACT]

2021 | online-resource

Control Strategy for Efficient Conversion of Photovoltaic Energy to Mechanical Work: An Innovative Scheme for Maximum Power Point Tracking and Optimal Load Modulation

TEchMA2021 – 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2021 | conference-abstract

Development of a Passive Orthosis for Reducing the Load at Hip Joint

TEchMA2021 – 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2021 | conference-abstract

Embedded implementation of predictive control strategies for gas-fired instantaneous water heaters

TEchMA 2021– 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2021 | conference-abstract

Household Thermal Energy Storage in the Context of Smart Grids: Viability and Potential Impact of Small Residential Consumers in Demand-Side Load Balancing with The Use of Phase-Change Materials

TEchMA2021 – 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2021 | conference-abstract

Performance evaluation of different control strategies for tankless gas water heaters

TEchMA 2021– 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2021 | conference-abstract

Capacitive interdigitated system of high osteoinductive/conductive performance for personalized acting-sensing implants

npj Regenerative Medicine

2021 | journal-article

IT platform to monitor and control bone-implant loosening in instrumented implants

Advances and Current Trends in Biomechanics

2021 | book-chapter

Predictive control strategies for optimizing temperature stability in instantaneous hot water systems

Science and Technology for the Built Environment

2021 | journal-article

Intrinsically Non-Overfitting, Nonlinear Multivariate Calibration

2020 | online-resource

Intrinsically Non-Overfitting, Nonlinear Multivariate Calibration: Application to Thermocouples

6th International Conference on Sensors and Electronic Instrumentation Advances (SEIA' 2020)

2020 | conference-paper

Enhanced osteoblast mineralization by capacitive electrical stimulation – an in vitro study towards implant osseointegration

14th YES (Young European Scientist Meeting)

2020 | conference-paper

Application of Intelligent Supervised Predictive Control in Smart green Buildings

2nd International Conference of TEMA: Mobilizing Projects

2020 | conference-abstract

Practical Multivariate Data Correction and Sensor Calibration Methods

IEEE Sensors Journal

2020 | journal-article

Load Management Using Household Refrigerators and Freezers in a Smart Grid Context: State-Of-The-Art Review

2020 | online-resource

GERADOR LINEAR ELETROMAGNE´TICO AUTO-ADAPTATIVO

2020 | disclosure

Application of gain-scheduling MPC for domestic water heaters

TEchMA2020: 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2020 | conference-abstract

Adaptive predictive control strategies of tankless hot water production

TEchMA2020 - 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2020 | conference-abstract

Application of gain-scheduling MPC for domestic water heatersTEchMA2020 - 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2020 | conference-abstract

Integration of Machine Learning and Multi-Objective Optimization to Reduce Energy-Related Cost and Improve Thermal Confort in Residential Buildings

TEchMA2020 - 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2020 | conference-abstract

Optimizing Solar Photovoltaic Energy Capture and Storage Using Household Cold Appliences

TEchMA2020 - 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions

2020 | conference-abstract

Altering the course of technologies to monitor loosening states of endoprosthetic implants

Sensors (Switzerland)

2020 | journal-article

Application of gain-scheduling MPC for domestic water heaters

TEchMA2020-3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 23 janeiro 2020

2020 | conference-paper

Desenvolvimento de um sistema de monitorização e controlo para máquina de lançamento de bolas de futebol

2020 | dissertation-thesis

Development of a prototype for sensing bone-implant interface

2020 | dissertation-thesis

Electromagnetic energy harvesting using magnetic levitation architectures: A review

Applied Energy

2020 | journal-article

Intrinsically Non-Overfitting, Nonlinear Multivariate Calibration: Application to Thermocouples

Intrinsically Non-Overfitting, Nonlinear Multivariate Calibration: Application to Thermocouples

2020 | journal-article

Machine Learning and Multi-Objective Optimization to Reduce Energy-Related Cost and Improve Thermal Confort in Residential Buildings

TEchMA2020-3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 23 janeiro 2020

2020 | conference-paper

Optimizing Solar Photovoltaic Energy Capture and Storage Using Household Cold Appliences

TEchMA2020-3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 23 janeiro 2020

2020 | conference-paper

Sistema capacitivo planar excitado a elevadas frequências para operações de monitorização em implantes instrumentados

2020 | dissertation-thesis

Innovative architecture optimization of electromagnetic energy harvesters

2nd Congresso do Centro de Tecnologia Mecânica e Automação

2019 | conference-paper

Osteoblast stimulation in vitro - benefits of capacitive interdigitated electrodes for osseointegration

X Jornadas Nacionais de Ciências Biomédicas (X JNCB)

2019 | conference-paper

Estimulação magnética para implantes ósseos multifuncionais

8th Congresso Nacional de Biomecânica (CNB2019)

2019 | conference-paper

Sistema de monitorização capacitivo para implantes ósseos inteligentes

8th Congresso Nacional de Biomecânica (CNB2019)

2019 | conference-paper

In vitro stimulation of osteoblasts using capacitive interdigitated electrodes to improve implant osseointegration

6th IEEE Portuguese Meeting on Bioengineering

2019 | conference-abstract

Advanced concept of bone implant

Orthopaedic Proceedings

2019 | journal-article

Capacitive technologies for highly controlled and personalized electrical stimulation by implantable biomedical systems

Scientific Reports

2019 | journal-article

Effects of parallel magnet bars and partially filled porous media on magneto-thermo-hydro-dynamic characteristics of pipe ferroconvection

International Journal of Heat and Mass Transfer

2019 | journal-article

Resumos alargados do 8º Congresso Nacional de Biomecânica

UA Editora

2019 | edited-book

Simulation models for tankless gas water heaters

Applied Thermal Engineering

2019 | journal-article

Advanced concept of bone implant

31st Annual Congress of the International Society for Technology for Arthroplasty

2018 | conference-paper

A biophysical model of trabecular bone to predict the electric field stimulation

8th World Congress of Biomechanics (WCB2018)

2018 | conference-paper

Novel electric stimulation systems for personalized bone implants

8th World Congress of Biomechanics (WCB2018)

2018 | conference-paper

Estimulação elétrica usando tecnologias capacitivas

1st Congresso do Centro de Tecnologia Mecânica e Automação

2018 | conference-abstract

Levitação magnética na geração autónoma de energia

1st Congresso do Centro de Tecnologia Mecânica e Automação

2018 | conference-abstract

Advanced concept of bone implant

Proceedings of the 31st Annual Congress of the International Society for Technology for Arthroplasty

2018 | conference-paper

Graphene-based materials and structures for energy harvesting with fluids – A review

Materials Today

2018 | journal-article

Novel electric stimulation systems for personalized bone implants

Proceedings of the 8th World Congress of Biomechanics (WCB2018)

2018 | conference-paper

Equipment and flow extraction process of biological and chemical contaminants

2017 | patent

Assessment of processing-induced residual stresses in micromolded polymeric parts

International Conference on Polimers and Moulds Innovations. Conference: PMI 2018 - Polymers and Moulds Innovations

2017 | conference-paper

O uso de redes neurais artificiais na otimização do processo de secagem convectiva de alimentos e redução do consumo energético

ÁGORA

2017 | magazine-article

Instrumented active implants: a new concept model

7th Portuguese Congress on Biomechanics

2017 | conference-paper

A new concept model for instrumented active implants

23rd Congress of the European Society of Biomechanics

2017 | conference-paper

Desenvolvimento de um simulador da articulação temporomandibular

10º Congresso Nacional de Mecânica Experimental - CNME2016

2016 | conference-paper

Development of a low energy consumption proportional valve for water flow regulation

First International Conference and Workshop on Mechanical Engineering Research

2016 | conference-paper

Development of a low-energy gas solenoid valve for use in domestic water heaters

First International Conference and Workshop on Mechanical Engineering Research

2016 | conference-paper

Modeling and Simulation of Tankless Gas Water Heaters to Reduce Temperature Overshoots and Undershoots

12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics

2016 | conference-paper

Implantes ósseos inteligentes? Mudança de paradigma nos implantes ativos

TecnoMetal

2016 | magazine-article

Enhancing time efficiency on single point incremental forming processes

International Journal of Material Forming

2016 | journal-article

Magnetic levitation-based electromagnetic energy harvesting: A semi-Analytical non-linear model for energy transduction

Scientific Reports

2016 | journal-article

New cosurface capacitive stimulators for the development of active osseointegrative implantable devices

Research@UA

2016 | magazine-article

Assessing 3 and 5 Degrees of Freedom Toolpath Strategy Influence on Single Point Incremental Forming

Key Engineering Materials

2015 | journal-article

The effects of drying parameters in the codfish (Gadus Morhua) drying rates

Revista Científica Vozes dos Vales – UFVJM

2015 | magazine-article

Assessing 3 and 5 degrees of freedom toolpath strategy influence on single point incremental forming

ESAFORM 2015 Conference

2015 | conference-paper

Próteses de Anca Instrumentadas

6º Congresso Nacional de Biomecânica

2015 | conference-paper

Active orthopaedic implants: Towards optimality

Journal of the Franklin Institute

2015 | journal-article

Control and execution of incremental forming using a Stewart platform

Lecture Notes in Electrical Engineering

2015 | book

Control and execution of incremental forming using a Stewart platform

Lecture Notes in Electrical Engineering

2015 | journal-article

Instrumented knee joint implants: Innovations and promising concepts

Expert Review of Medical Devices

2015 | journal-article

The effects of drying parameters in the codfish (Gadus Morhua) drying rates

Revista Científica Vozes dos Vales – UFVJM – MG – Brasil – No 07 – Ano IV – 05/2015

2015 | journal-article

Assessing 3 and 5 degrees of freedom toolpath strategy influence on Single Point Incremental Forming

Metal Forming

2014 | conference-paper

An electrical power supply system for instrumented hip joint prostheses

7th World Congress of Biomechanics (WCB 2014)

2014 | conference-paper

Estudos preliminares no ensaio de próteses de anca à fadiga

5º Encontro de Análise Experimental de Tensões e Mecânica Experimental

2014 | conference-paper

Characteristic curves of the codfish drying kinetics with thin-layer simulation models

Journal of Food Processing and Preservation

2014 | journal-article

Instrumented hip joint replacements, femoral replacements and femoral fracture stabilizers

Expert Review of Medical Devices

2014 | journal-article

Novel intelligent real-time position tracking system using FPGA and fuzzy logic

ISA Transactions

2014 | journal-article

SPIF-A: On the development of a new concept of incremental forming machine

Structural Engineering and Mechanics

2014 | journal-article

Towards smart manufacturing techniques using incremental sheet forming

Smart Manufacturing Innovation and Transformation: Interconnection and Intelligence

2014 | book

Máquina para Estampagem Incremental de Chapa

2013 | patent

Therapeutic Methodology for the Prevention of Aseptic Loosening of Prosthesis

19th Congress of the European Society of Biomechanics (ESB2013)

2013 | conference-paper

Optimality Analysis of Orthopaedic Implants

19th Congress of the European Society of Biomechanics

2013 | conference-abstract

Food Flow Extract - Flow Extraction of Microbiological Contaminants

FEMS 2013 - 5th Congress of European Microbiologists

2013 | conference-paper

CAD/CAM strategies for a parallel kinematics SPIF machine

Key Engineering Materials

2013 | book

Controle dos par̂ametros de secagem numa instalação experimental utilizando lógica difusa

Proceeding Series of the Brazilian Society of Computational and Applied Mathematics

2013 | journal-article

Equilibrium moisture content isotherms of codfish (gadus morhua)

Journal of Aquatic Food Product Technology

2013 | journal-article

High performance controller for drying processes,Controlador de alta performance para processos de secagem

Acta Scientiarum - Technology

2013 | journal-article

Instrumented hip implants: Electric supply systems

Journal of Biomechanics

2013 | journal-article

Integral approach for production of thermoplastics microparts by injection moulding

Journal of Materials Science

2013 | journal-article

Otimização dos parâmetros de secagem para minimizacção do custo energético num secador convectivo de alimentos

Proceeding Series of the Brazilian Society of Applied and Computational Mathematics

2013 | journal-article

Otimização dos par̂ametros de secagem para minimização do custo energético num secador convectivo de alimentos

Proceeding Series of the Brazilian Society of Computational and Applied Mathematics

2013 | journal-article

Polymer flow dynamics in microimpressions: An experimental approach

Polymer Testing

2013 | journal-article

Power management architecture for smart hip prostheses comprising multiple energy harvesting systems

Sensors and Actuators, A: Physical

2013 | journal-article

Therapeutic Methodology for the Prevention of Aseptic Loosening of Prosthesis

19th Congress of the European Society of Biomechanics

2013 | conference-paper

Advanced coating systems towards the analysis of polymer flow within microcavities

PMI 2012 - 5nd International Conference on Polymers & Moulds Innovations

2012 | conference-paper

Effect of the micromolding process conditions on polymer flow behavior within a variable thickness microcavity

PMI 2012 - Int. Conf. on Polymers & Moulds Innovations

2012 | conference-paper

Nonlinear modeling of vibrational energy harvesters for smart prostheses

26th European Conference on Solid-State Transducers, EUROSENSOR 2012

2012 | conference-paper

Mathematical modeling of cylindrical electromagnetic vibration energy harvesters

2012 International Conference on Computational and Mathematical Methods in Science and Engineering

2012 | conference-paper

Design Methodology for the Development of Long-Term Hip Prosthesis Survival

18th Congress of the European Society of Biomechanics

2012 | conference-paper

Generation of toolpath for the single point incremental forming

First European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference YIC2012

2012 | conference-paper

Advanced coating systems towards the analysis of polymer flow within microcavities

5th Conference on Polymer and Mold Innovations

2012 | conference-paper

Design methodology for the development of long-term hip prosthesis survival

Journal of Biomechanics

2012 | journal-article

Effect of the micromoulding process conditions on polymer flow behavior within a variable thickness microcavity

PMI 2012-Int. Conf. on Polymers & Moulds Innovations

2012 | conference-paper

Experimental Comparison between Control Schemes for a Drying Process Dynamics

International Conference on Electronics, Information and Communication Engineering (EICE 2012)

2012 | book-chapter

Experimental Comparison between Control Schemes for a Drying Process Dynamics

International Conference on Electronics, Information and Communication Engineering (EICE 2012)

2012 | conference-paper

High performance controller for drying processes - doi: 10.4025/actascitechnol.v35i2.14775

2012 | journal-article

Improvement on control performance using FPGAs over software-based platforms

IEEE International Conference on Emerging Technologies and Factory Automation, ETFA

2012 | conference-paper

Multi-purpose and multi-source energy management system for biomedical implants

26th European Conference on Solid-State Transducers, EUROSENSOR 2012

2012 | conference-paper

Multi-source energy harvesting power generators for instrumented implants: Towards the development of a smart hip prosthesis

BIODEVICES 2012 - Proceedings of the International Conference on Biomedical Electronics and Devices

2012 | conference-paper

Nonlinear modeling of vibrational energy harvesters for smart prostheses

Procedia Engineering

2012 | conference-paper

Estampagem Incremental: Estudo Numérico e Experimental

Congresso de Métodos Numéricos em Engenharia - CMNE 2011

2011 | conference-paper

Modeling the Correlation Betweeen Relative Humidity, Temperature and Air Velocity in the Codfish Drying

5th Nordic Drying Conference - NDC 2011

2011 | conference-paper

Numerical studies and equipment development for single point incremental forming

International Deep Drawing Research Group Conference (IDDRG 2011),

2011 | conference-paper

Finding the Best Machine for SPIF Operations - a Brief Discussion

Key Engineering Materials

2011 | journal-article

A vibration-based energy harvesting system for implantable biomedical telemetry systems

BIODEVICES 2011 - Proceedings of the International Conference on Biomedical Electronics and Devices

2011 | conference-paper

A vibration-based energy harvesting system for implantable biomedical telemetry systems

BIODEVICES 2011, International Joint Conference on Biomedical Engineering Systems and Technologies

2011 | conference-paper

Determination of the Equilibrium Moisture Content Isotherms of Codfish (Gadus Morhua)

5th Nordic Drying Conference - NDC 2011

2011 | conference-paper

Double permanent magnet vibration power generator for smart hip prosthesis

Sensors and Actuators, A: Physical

2011 | journal-article

Fuzzy control of aservopneumatic wear simulator of acetabular components of hip prosthesis: Implementing nonlinear controllers for the angular movement of three coupled degrees of freedom

ICINCO 2011 - Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics

2011 | conference-paper

Lógica Difusa na Otimização do Controlo de Processos de Secagem

10º Congresso Ibero-americano de Engenharia Mecânica

2011 | conference-paper

Modeling and simulation of a mixing system with water saving function

Journal of Thermal Science and Engineering Applications

2011 | journal-article

Nonlinear Pid: The bridge between advanced control methods and its industrial applications: The future of the nonlinear pid

ICINCO 2011 - Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics

2011 | journal-article

Numerical studies and equipment development for single point incremental forming

AIP Conference Proceedings

2011 | conference-paper

Optimization of hybrid PV/wind power system for remote telecom station

2011 International Conference on Power and Energy Systems, ICPS 2011

2011 | conference-paper

Optimized operating drying control for temperature, relative humidity and air velocity parameters by means of fuzzy logic approach

Poster PII-16, European Drying Conference-EuroDrying

2011 | conference-paper

Predicting the drying kinetics of salted codfish (Gadus Morhua): Semi-empirical, diffusive and neural network models

International Journal of Food Science and Technology

2011 | journal-article

USE OF ARTIFICIAL NEURAL NETWORKS FOR PREDICTION OF CODFISH DRYING OPTIMAL PARAMETERS

Global Journal of Pure & Applied Science and Technology (GJPAST). Vol 1, Issue 2, pp. 1-14

2011 | journal-article

Use of artificial neural networks for prediction of codfish drying optimal parameters

Global Journal of Pure & Applied Science and Technology (GJPAST)

2011 | journal-article

Hybrid Fuzzy Selecting-Control-By- Range Controllers Of A Servopneumatic Fatigue System

Zenodo

2010 | journal-article

Nonlinear Fuzzy Tracking Real-Time-Based Control Of Drying Parameters

Zenodo

2010 | journal-article

Assessment of Residual Stresses in the in Mould Insert Moulded Parts

4th International PMI Conference

2010 | conference-paper

Comparison of mathematical models to describe the codfish drying process

17th International Drying Symposium

2010 | conference-paper

Permanent Magnet Vibration Power Generator As an Embedded Mechanism for Smart Hip Prosthesis

Eurosensors XXIV Conference

2010 | conference-paper

Salted codfish drying kinetics: utilization of a semi-empirical simulation model

11th Pan-American Congress of Applied Mechanics, PACAM XI

2010 | conference-paper

Utilização de modelos semi-empíricos na simulação da secagem de bacalhau

III Conferência Nacional em Mecânica de Fluidos, Termodinâmica e Energia (MEFTE - Bragança 09)

2009 | conference-paper

Simulador de Desgaste da Componente Acetabular da Prótese da Anca

3º Congresso Nacional de Biomecânica

2009 | conference-paper

An activation circuit for battery-powered biomedical implantable systems

Sensors and Actuators, A: Physical

2009 | journal-article

On the suitability of the conventional injection moulding process for micro featured parts replication - a DOE approach

7th International Conference on Industrial Tools and Material Processing Technologies - ICIT & MPT 2009

2009 | conference-paper

Position control of a servo-pneumatic system: Hybrid fuzzy P+I controller of a servo-pneumatic fatigue simulator

ICINCO 2009 - 6th International Conference on Informatics in Control, Automation and Robotics, Proceedings

2009 | conference-paper

Relative influence of injection molding processing conditions on HDPE acetabular cups dimensional stability

Journal of Materials Processing Technology

2009 | journal-article

Simulador de Desgaste da Componente Acetabular da Prótese da Anca

3o Congresso Nacional de Biomecânica

2009 | conference-paper

Utilização de modelos semi-empíricos na simulação da secagem de bacalhau

III Conferência Nacional em Mecânica de Fluidos, Termodinâmica e Energia (MEFTE - Bragança 09)

2009 | conference-paper

Unconstrained springback behavior of Al–Mg–Si sheets for different sitting times

International Journal of Mechanical Sciences

2008 | journal-article

Modelação e simulação de uma válvula misturadora termostática com sistema anti-escaldão e anti-resfriado

II Conferência Nacional de Métodos Numéricos em Mecânica de Fluidos e Termodinâmica

2008 | conference-paper

Influência dos Tecidos Gengivais na Micromobilidade do Sistema Dente/Periodonto: Estudo Experimental

7º Congresso Nacional de Mecânica Experimental – CNME

2008 | conference-paper

Um Algoritmo de Newmark Baseado no Método das Forças para uso em Testes Pseudo-Dinâmicos

7º Congresso Nacional de Mecânica Experimental – CNME

2008 | conference-paper

Influência dos Tecidos Gengivais na Micromobilidade do Sistema Dente/Periodonto: Estudo Experimental

o 7o Congresso Nacional de Mecânica Experimental – CNME

2008 | conference-paper

Modelação e simulação de uma válvula misturadora termostática com sistema anti-escaldão e anti-resfriado

II Conferência Nacional de Métodos Numéricos em Mecânica de Fluidos e Termodinâmica

2008 | conference-paper

Modeling and simulation of a thermostatic mixer with an anti-scalding or anti-cold system

International Journal of Thermal Sciences

2008 | journal-article

Servo-Pneumatic Machine to Perform and Monitoring Tests on Biomechanical Devices

8th Portuguese Conference on Automatic Control – CONTROLO’2008

2008 | conference-paper

Um Algoritmo de Newmark Baseado no Método das Forças para uso em Testes Pseudo-Dinâmicos

7o Congresso Nacional de Mecânica Experimental – CNME

2008 | conference-paper

A review of mathematical models of non-linear mechanical systems that involve friction

WSEAS Transactions on Systems

2007 | journal-article

Design and control of a hydraulic press

Proceedings of the 2006 IEEE Conference on Computer Aided Control Systems Design, CACSD

2007 | conference-paper

Modeling and evaluation of the time dependent springback behaviour of 6022-T4 aluminum alloys

13th International Symposium on Plasticity

2007 | conference-paper

0n-line monitoring and remote operation of an injection molding machine

Proceedings of the 7th Portuguese Conference on Automatic Control – CONTROLO’2006, September

2006 | conference-paper

0n-line monitoring and remote operation of an injection molding machine

7th Portuguese Conference on Automatic Control – CONTROLO’2006

2006 | conference-paper

Close loop control of a hydraulic press for springback analysis

Journal of Materials Processing Technology

2006 | journal-article

Control system of a mini hydraulic press for evaluating springback in sheet metal forming

Journal of Materials Processing Technology

2006 | journal-article

Design and control of a hydraulic press

2006 | conference-paper

Modeling multidisciplinary systems with Hybrid Statecharts

2006 IEEE International Symposium on Intelligent Control

2006 | conference-paper

Hardware-in-the-loop simulation experiments with a hydraulic manipulator model

Australian Journal of Mechanical Engineering

2005 | journal-article

Experiências de simulação com Hardware-in-the-loop

7º Congresso Iberoamericano de Engenharia Mecânica

2005 | conference-paper

Hardware-in-the-loop simulation experiments with a hydraulic manipulator model

Australian Journal of Mechanical Engineering

2005 | journal-article

Hybrid Statecharts to model continuous and discrete behavior in engineering

WSEAS AMCOS 2005 International Conference

2005 | conference-paper

New experimental device of evaluating springback in sheet metal forming

Materials Science and Technology

2005 | journal-article

Hybrid models for hardware-in-the-loop simulation of hydraulic systems Part 1: Theory

Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering

2004 | journal-article

Hybrid models for hardware-in-the-loop simulation of hydraulic systems Part 2: Experiments

Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering

2004 | journal-article

Real time simulation of a hydraulic manipulator using the xPC platform

CONTROLO2004 Sixth Portuguese Conference on Automatic Control

2004 | conference-paper

The Experiment Device of Controlling Springback in Real Time during Sheet Metal Forming

7th International ESAFORM Conference on Material Forming, ESAFORM 2004

2004 | conference-paper

Hardware-in-the-loop simulation experiments with a hydraulic manipulator model

1st International Conference on Computational Methods in Fluid Power Technology: Methods for solving Practical Problems in Design and Control

2003 | conference-paper

A Method of Real-Time Controlling Springback in Sheet Metal Forming

8th Annual International Conference on Industrial Engineering Theory, Application and Practice, IJIE 2003

2003 | conference-paper

Modelação de sistemas hidráulicos para simulação com hardware-in-the-loop

2003 | dissertation-thesis

The Study and Analysis of a Real-time Control Method for Springback in Sheet Metal Forming

6th International ESAFORM Conference on Material Forming, ESAFORM 2003

2003 | conference-paper

The study and analysis of a real-time control method for springback in sheet metal forming

Proceedings of the Sixth International ESAFORM Conference on Materrial Forming, Salerno, Italy

2003 | conference-paper

Desenvolvimento de uma prótese de anca para a medição in vitro de variações de temperaturas

Mecânica Experimental

2002 | journal-article

Desenvolvimento de uma prótese de anca para a medição in vitro de variações de temperaturas

Mecânica Experimental

2002 | magazine-article

Experimental device about automatic control of a hydraulic press

Proceedings of Asian Simulation Conference; System Simulation and Scientific Computing (Shanghai)

2002 | conference-paper

Semi-empirical model for a hydraulic servo-solenoid valve

Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering

2002 | journal-article

Suspension Analysing Equipment Based on a Hydraulic Servo-Cylinder

CONTROLO 2002 - 5th Portuguese Conference on Automatic Control

2002 | conference-paper

Desenvolvimento de uma prótese de anca para a medição in vitro de extensões e temperaturas

4º Encontro de Análise Experimental de Tensões e Mecânica Experimental

2001 | conference-paper

Virtualização de Autómatos Programáveis

Revista do DETUA

1999 | magazine-article

Modeling of hydraulic systems for hardware-in-the-loop simulation: a methodology proposal

American Society of Mechanical Engineers, The Fluid Power and Systems Technology Division (Publication) FPST

1999 | conference-paper

Modelling hybrid systems using Statecharts and Modelica

IEEE Symposium on Emerging Technologies and Factory Automation, ETFA

1999 | journal-article

Virtualização de Autómatos Programáveis

Electrónica e Telecomunicações

1999 | journal-article

Ensino de automatização de tarefas com um controlador lógico programável virtual

Atas do III Congresso Iberoamericano de Ingeniería Mecánica CIDIM’97

1997 | conference-paper

Object Oriented Simulation of Relay Ladder Logic

International Conference on Manufacturing Automation ICMA’97

1997 | conference-paper

Virtualização de autómatos programáveis

1994 | dissertation-thesis

Virtualization of Programmable Logic Controllers

International AMSE Conference on Systems Analysis, Control & Design - SYS' 93

1993 | conference-paper

Software Development for Programmable Logic Controllers - a methodology and a system

IFAC Workshop on CIM in Process and Manufacturing Industries

1992 | conference-paper

A Method of Real-Time Controlling Springback in Sheet Metal Forming

Proceedings of the 8th Annual International Conference on Industrial Engineering Theory, Application and Practice, IJIE

| conference-paper

A biophisical model of trabecular bone to predict the electric field stimulation

Proceedings of the 8th World Congress of Biomechanics (WCB2018)

| conference-paper

A new concept model for instrumented active implants

Proceedings of the 23rd Congress of the European Society of Biomechanics

| conference-paper

Adaptive predictive control strategies of tankless hot water production

TEchMA2020-3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 23 janeiro 2020

| conference-paper

An electrical power supply system for instrumented hip joint prostheses

Simões

| journal-article

Application of Intelligent Supervised Predictive Control in Smart green Buildings

2nd International Conference of TEMA: Mobilizing Projects

| book-chapter

Comparison of mathematical models to describe the codfish drying process

Proceedings of the 17th International Drying Symposium, October

| conference-paper

Data acquisition and storage platform for injection moulding processes: an IoT approach

2nd International Conference of TEMA: Mobilizing Projects

| book-chapter

Desenvolvimento de um simulador da articulação temporomandibular

Proceedings of the 10o Congresso Nacional de Mecânica Experimental - CNME2016

| conference-paper

Design Methodology for the Development of Long-Term Hip Prosthesis Survival

Proceedings of the 18th Congress of the European Society of Biomechanics

| conference-paper

Determination of the Equilibrium Moisture Content Isotherms of Codfish (Gadus Morhua)

Proceedings of the 5th Nordic Drying Conference - NDC

| conference-paper

Development of a low energy consumption proportional valve for water flow regulation

Proceedings of the First International Conference and Workshop on Mechanical Engineering Research

| conference-paper

Development of a low-energy gas solenoid valve for use in domestic water heaters

Proceedings of the First International Conference and Workshop on Mechanical Engineering Research

| conference-paper

Development of a virtual bench for simulation and monitoring of water heating devices

2nd International Conference of TEMA: Mobilizing Projects

| book-chapter

Enanced osteoblast mineralization by capacitive electrical stimulation – an in vitro study towards implant osseointegration

Proceedings of the 14th YES (Young European Scientist) Meeting

| conference-paper

Ensino de automatização de tarefas com um controlador lógico programável virtual

Proceedings do III Congresso Iberoamericano de Ingeniería Mecánica CIDIM’97

| conference-paper

Estampagem Incremental: Estudo Numérico e Experimental

Proceedings of the Congresso de Métodos Numéricos em Engenharia - CMNE

| journal-article

Estimulação elétrica usando tecnologias capacitivas

| conference-paper

Estimulação magnética para implantes ósseos multifuncionais

Proceedings of the 8th Congresso Nacional de Biomecânica

| conference-paper

Experiências de simulação com Hardware-in-the-loop

”. Actas do 7o Congresso Iberoamericano de Engenharia Mecânica, Outubro, Cidade do México

| conference-paper

Food Flow Extract - Flow Extraction of Microbiological Contaminants

Processdings of FEMS 2013-5th Congress of European Microbiologists

| book-chapter

Generation of toolpath for the single point incremental forming

First European Community on Computational Methods in Applied Sciences (ECCOMAS) Young Investigators Conference

| journal-article

Hardware-in-the-loop simulation experiments with a hydraulic manipulator model

Computational Methods in Fluid Power Technology: Methods for solving Practical Problems in Design and Control

| conference-paper

Hybrid Statecharts to model continuous and discrete behavior in engineering

Proceedings of the WSEAS AMCOS 2005 International Conference, April, Rio de Janeiro, Brasil

| conference-paper

Implantes ósseos inteligentes? Mudança de paradigma nos implantes ativos

Simões

| journal-article

In vitro stimulation of osteoblasts using capacitive interdigitated electrodes to improve implant osseointegration

Proceedings of the 6th IEEE Portuguese Meeting on Bioengineering (ENBENG

| conference-paper

Innovative architecture optimization of electromagnetic energy harvesters

Ferreira

| journal-article

Instrumented active implants: a new concept model

Proceedings of the 7th Portuguese Congress on Biomechanics

| conference-paper

Levitação magnética na geração autónoma de energia

| conference-paper

Lógica Difusa na Otimização do Controlo de Processos de Secagem

10o Congresso Ibero-americano de Engenharia Mecânica, Setembro

| book-chapter

Mathematical modeling of cylindrical electromagnetic vibration energy harvesters

Proceedings of the 2012 International Conference on Computational and Mathematical Methods in Science and Engineering

| conference-paper

Modeling Hybrid Systems Using Statecharts and Modelica

Proceedings of the 7th IEEE International Conference on Emerging Technologies and Factory Automation, October

| conference-paper

Modeling and Simulation of Tankless Gas Water Heaters to Reduce Temperature Overshoots and Undershoots

Proceedings of the 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics

| conference-paper

Modeling and evaluation of the time dependent springback behaviour of 6022-T4 aluminum alloys

Proceedings of the 13th International Symposium on Plasticity, June Girdwood

| conference-paper

Modeling multidisciplinary systems with Hybrid Statecharts

Proceedings of the 2006 IEEE International Symposium on Intelligent Control

| conference-paper

Modeling the Correlation Betweeen Relative Humidity, Temperature and Air Velocity in the Codfish Drying

Proceedings of the 5th Nordic Drying Conference - NDC

| conference-paper

Modelling Codfish Drying: Comparison Between Artificial Neural Network, Diffusive and Semi-Empirical Models

Mathematical Methods in Engineering, published

| book-chapter

Multi-purpose and multi-source energy management system for biomedical implants

Proceedings of the 26th European Conference on Solid-State Transducers, EUROSENSOR

| conference-paper

Multi-source Harvesting Systems for Electric Energy Generation on Smart Hip Prostheses

Biomedical Engineering Systems and Technologies

| book-chapter

New cosurface capacitive stimulators for the development of active osseointegrative implantable devices

Ferreira

| journal-article

O uso de redes neurais artificiais na otimização do processo de secagem convectiva de alimentos e redução do consumo energético

Ferreira

| journal-article

Object Oriented Simulation of Relay Ladder Logic

Proceedings of the International Conference on Manufacturing Automation ICMA’97, April, Hong Kong

| conference-paper

On the suitability of the conventional injection moulding process for micro featured parts replication - a DOE approach

Proceedings of the 7th International Conference on Industrial Tools and Material Processing Technologies - ICIT & MPT

| conference-paper

Optimality Analysis of Orthopaedic Implants

Proceedings of the 19th Congress of the European Society of Biomechanics

| conference-paper

Osteoblast stimulation in vitro - benefits of capacitive interdigitated electrodes for osseointegration

Proceedings of the X Jornadas Nacionais de Ciências Biomédicas (X JNCB)

| conference-paper

Otimização dos parâmetros de secagem para minimizacção do custo energético num secador convectivo de alimentos

Proceeding Series of the Brazilian Society of Applied and Computational Mathematics

| journal-article

Permanent Magnet Vibration Power Generator As an Embedded Mechanism for Smart Hip Prosthesis

Proceedings of the Eurosensors XXIV Conference, September

| conference-paper

Real time simulation of a hydraulic manipulator using the xPC platform

Proceedings of CONTROLO2004 Sixth Portuguese Conference on Automatic Control, June

| conference-paper

Salted codfish drying kinetics: utilization of a semi-empirical simulation model

Proceedings of the 11th Pan-American Congress of Applied Mechanics, PACAM

| conference-paper

Servo-Pneumatic Machine to Perform and Monitoring Tests on Biomechanical Devices

Proceedings of the 8th Portuguese Conference on Automatic Control – CONTROLO’2008, July

| conference-paper

Sistema de monitorização capacitivo para implantes ósseos inteligentes

Proceedings of the 8th Congresso Nacional de Biomecânica

| conference-paper

Software Development for Programmable Logic Controllers - a methodology and a system

Proceedings of the IFAC Workshop on CIM in Process and Manufacturing Industries

| conference-paper

Suspension Analysing Equipment Based on a Hydraulic Servo-Cylinder

Proceedings of CONTROLO 2002-5th Portuguese Conference on Automatic Control

| conference-paper

Testing and Evaluation of Control Strategies for a Prototype Hydraulic Press

Proceedings of the IMECE'03

| conference-paper

The Experiment Device of Controlling Springback in Real Time during Sheet Metal Forming

Proceedings of the 7th International ESAFORM Conference on Material Forming, ESAFORM

| conference-paper

The effects of drying parameters in the codfish (Gadus Morhua) drying rates

Ferreira

| journal-article

Virtualization of Programmable Logic Controllers

Proceedings of the International AMSE Conference on Systems Analysis, Control & Design - SYS' 93, September

| conference-paper