Algoritmi | User | João Pedro de Sousa Oliveira


João Pedro de Sousa Oliveira

João Pedro de Sousa Oliveira
At LASI
Member of the UNIDEMI R&D Unit
Academic Degree
Current Position
at FCT NOVA
Personal Webpage
Personal Email
Orcid
0000-0001-6906-1870Researcher ID
AMFCT Public Key
Ciência ID
D217-F7B0-8B11Google Scholar
About Me
João Pedro Oliveira was born on the 14th of January 1989 in Sintra, Portugal. He got his PhD in Materials Science and Enginering in 2016 from Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Portugal. During his Phd, Joao worked on welding of shape memory alloys and was an invited researcher at the the Center for Advanced Materials Joining of The University of Waterloo, Canada. He then took a postdoctoral position at the Welding Engineering Program, Department of Materials Science and Engineering, at the The Ohio State University, USA working in the areas of welding and additive manufacturing of advanced engineering alloys. In 2018 he took an assistant professor position at the Department of Mechanical and Industrial Engineering at Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Portugal. In 2022 he moved to the Materials Science Department also at Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Portugal. At the Materials Science Department he is the coordinator of the bachelor degree in Materials Engineering. His primary research interests focus on fusion-based welding and additive manufacturing. João has a special interest in non-conventional metallic materials such as high entropy alloys and shape memory alloys. Most of João's group research leverages on the use of electron microscopy and high energy synchrotron X-ray diffraction to understand the microstructure evolution upon the application of different processing routes. Joao and his group have been developing automated routines for processing the large amount of data generated during synchrotron X-ray diffraction. More recently, João's group has been developed thermodynamic simulation routines for probing vast compositional spaces supported by experimental validation. João is/was the PI or co-PI in several national and international applied and fundamental projects and has raised more than 1.5 M Euros in funding. The impact of Joao and his group's work in the areas of additive manufacturing and welding is evidenced by the more than 120 peer-review papers in key outlets that include Progress in Materials Science, Acta Materialia, Scripta Materialia and Additive Manufacturing. He has a Scopus h-index of 42 (https://www.scopus.com/authid/detail.uri?authorId=55601590000) and holds one patent on novel additive manufacturing process based on wire and arc additive manufacturing. Joao currently supervises 10 PhD students in the areas of welding and additive manufacturing. Finally, João is currently Associate Editor of Additive Manufacturing and is part of the editorial board of Materials & Design (both Elsevier journals).
Publications (247)
Mechanical property strengthening by post-heat treatments in NiTiCu shape memory alloys fabricated by twin-wire arc additive manufacturing
Virtual and Physical Prototyping
2025 | journal-article
Achieving excellent plasticity performance in non-equiatomic FCC CoCrFeNiMoMn high-entropy alloys via arc-based direct energy deposition
Materials Science and Engineering: A
2025 | journal-article
Ni-based superalloy 718 fabricated by arc-based directed energy deposition
Materials Science and Engineering: A
2025 | journal-article
Microstructure evolution and local strengthening mechanisms in CoCrFeMnNi high entropy alloy joints reinforced with Inconel 625
Materials Science and Engineering: A
2025 | journal-article
Microstructure characterization of AlCrFeCoNi high-entropy alloy coating on Inconel 718 by electrospark deposition
Materials Characterization
2025 | journal-article
Influence of laser powder bed fusion of high-entropy alloy transition layer on the wetting and spreading behaviour of Al alloy on steel substrate surface
Journal Of Materials Processing Technology
2025 | journal-article
Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing
Materialia
2025 | journal-article
Resistance spot welded NiTi shape memory alloy to Ti6Al4V
Materials and Design
2025 | journal-article
Process development and application of hot forging arc-based additive manufacturing on Haynes® 282 for microstructural and mechanical improvements
Journal of Alloys and Compounds
2025 | journal-article
Analysis of arc regularity and selection of process parameters for WAAM of 316L-Si stainless steel by GMAW-CCC
The International Journal of Advanced Manufacturing Technology
2025 | journal-article
Coupling effect of dynamic power and oscillation path on butt weld formation and melt flow behavior during aluminum alloys
Optics And Laser Technology
2025 | journal-article
Gas tungsten arc welding of CoCrFeMnNi high entropy alloy to 316 stainless steel
Materials Science and Engineering: A
2025 | journal-article
Laser transmission joining of plasma treated polypropylene to stainless steel
Optics And Laser Technology
2025 | journal-article
Excellent strength/ductility synergy by optimization of post-weld heat treatment for gas metal arc welded CoCrFeMnNi high entropy alloys with 410 stainless filler wire
Materials and Design
2025 | journal-article
Grain refinement of Inconel 625 during wire-based directed energy deposition additive manufacturing by in-situ added TiB2 particles: Process development, microstructure evolution and mechanical characterization
Intermetallics
2024 | journal-article
Microstructure and nanomechanical behaviour of wire-arc additive manufactured nickel-based superalloy C276
Progress in Additive Manufacturing
2024 | journal-article
High-strength low-alloy steel fabricated by in situ interlayer hot forging arc-based directed energy deposition assisted with direct cooling
Journal of Manufacturing Processes
2024 | journal-article
Correction to
International Journal Of Advanced Manufacturing Technology
2024 | journal-article
Demystifying “absolute truths” of additive manufacturing
CIRP Journal of Manufacturing Science and Technology
2024 | journal-article
Enhancing microstructural integrity and mechanical performance of thick wire-arc directed energy deposited eutectic aluminum-silicon solid structure through continuous multi-pass friction stir processing
Materials Science and Engineering: A
2024 | journal-article
Gas tungsten arc welding of a multiphase CoCuxFeMnNi (x=20,30) high entropy alloy system: Microstructural differences and their consequences on mechanical performance
Intermetallics
2024 | journal-article
Strengthening synergies of various interlayers in NiTi toTi6Al4V dissimilar laser joints
Journal Of Materials Processing Technology
2024 | journal-article
Mechanical and corrosion characteristics of heat-treated wire arc additive manufactured parts of Inconel ® 625 superalloy
Progress in Additive Manufacturing
2024 | journal-article
Minimizing the maximum von Mises stress of elastic continuum structures using topology optimization and additively manufactured functionally graded materials
Computers and Structures
2024 | journal-article
Wire arc additive manufacturing of a high-strength low-alloy steel part
International Journal Of Advanced Manufacturing Technology
2024 | journal-article
Microstructure and mechanical properties of Al-Zn-Mg-Cu alloy fabricated by multi-wire arc-based directed energy deposition
Journal of Manufacturing Processes
2024 | journal-article
Role of TiB2 inoculation particles during welding of a AlCoCrFeNi high entropy alloy
Journal of Alloys and Compounds
2024 | journal-article
Time-resolved evolution of the deformation mechanisms in a TRIP/TWIP Fe50Mn30Co10Cr10 high entropy during tensile loading probed with synchrotron X-ray diffraction
International Journal of Plasticity
2024 | journal-article
Life cycle assessment and economics of additive manufacturing processes
Additive Manufacturing Materials and Technology
2024 | book-chapter
Cellulose Acetate and Polycaprolactone Fibre Coatings on Medical-Grade Metal Substrates for Controlled Drug Release
Polymers
2024 | journal-article
Ultra-strong and ductile precipitation-strengthened high entropy alloy with 0.5 % Nb addition produced by laser additive manufacturing
Journal of Materials Science and Technology
2024 | journal-article
Microstructure and Phase Transformation Behavior of NiTiCu Shape Memory Alloys Produced Using Twin-Wire Arc Additive Manufacturing
Additive Manufacturing Frontiers
2024 | journal-article
Synergistic effects of Monel 400 filler wire in gas metal arc welding of CoCrFeMnNi high entropy alloy
Materials and Design
2024 | journal-article
High-performance Ni-based superalloy 718 fabricated via arc plasma directed energy deposition
Additive Manufacturing
2024 | journal-article
Precipitation and reverted austenite formation in maraging 350 steel
Acta Materialia
2024 | journal-article
Advancing Sustainable Decision Making in Additive Manufacturing: A Comprehensive Review of Multi-Criteria Decision Making Approaches
Clean Technologies
2024 | journal-article
Development of a gas metal arc based prototype for direct energy deposition with micrometric wire
Journal of Materials Research and Technology
2024 | journal-article
In-situ microstructural evolution during tensile loading of CoCrFeMnNi high entropy alloy welded joint probed by high energy synchrotron X-ray diffraction
Science and Technology of Welding and Joining
2024 | journal-article
Revealing microstructural evolution and mechanical properties of resistance spot welded NiTi-stainless steel with Ni or Nb interlayer
Journal of Materials Science & Technology
2024 | journal-article
Unleashing the microstructural evolutions during hot deformation of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy
Intermetallics
2024 | journal-article
Unveiling the microstructure evolution and mechanical properties in a gas tungsten arc-welded Fe–Mn–Si–Cr–Ni shape memory alloy
Journal of Materials Science
2024 | journal-article
Effects of hatch spacing on pore segregation and mechanical properties during blue laser directed energy deposition of AlSi10Mg
Additive Manufacturing
2024 | journal-article
A holistic approach for evaluation of Gaussian versus ring beam processing on structure and properties in laser powder bed fusion
Journal Of Materials Processing Technology
2024 | journal-article
Effect of defocusing distance on interfacial reaction and mechanical properties of dissimilar laser Al/steel joints with a porous high entropy alloy coating
Materials Characterization
2024 | journal-article
Microstructure gradients across the white etching and transition layers of a heavy haul pearlitic steel
Materials Characterization
2024 | journal-article
Understanding the microstructural evolution and fatigue behavior of aluminum 2319 fabricated by wire arc additive manufacturing
Archives of Civil and Mechanical Engineering
2024 | journal-article
Effect of Al-Si Coating on the Interfacial Microstructure and Corrosion Resistance of Dissimilar Laser Al Alloy/22MnB5 Steel Joints
Metals
2024 | journal-article
Effect of post weld heat treatment on the microstructure and mechanical properties of gas tungsten arc welded Al0.3CoCrFeNi high entropy alloy
Scripta Materialia
2024 | journal-article
Fabrication of spatially-variable heterostructured CoCrFeMnNi high entropy alloy by laser processing
Materials Science and Engineering: A
2024 | journal-article
Laser microwelding as a novel alloying process to fabricate NiTiPtIr high temperature shape memory alloys
Materials Characterization
2024 | journal-article
Residual Stresses in a Wire and Arc-Directed Energy-Deposited Al–6Cu–Mn (ER2319) Alloy Determined by Energy-Dispersive High-Energy X-ray Diffraction
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2024 | journal-article
Unraveling the formation of L12 nano-precipitates within the FCC-phase in AlCoCrFeNi2.1 eutectic high entropy alloy
Vacuum
2024 | journal-article
Evolution of microstructure and deformation mechanisms in a metastable Fe42Mn28Co10Cr15Si5 high entropy alloy
Materials and Design
2024 | journal-article
Phase transformation mechanisms of NiTi shape memory alloy during electromagnetic pulse welding of Al/NiTi dissimilar joints
Materials Science and Engineering: A
2024 | journal-article
On the orientation-dependent mechanical properties of interstitial solute-strengthened Fe49.5Mn30Co10Cr10C0.5 high entropy alloy produced by directed energy deposition
Additive Manufacturing
2024 | journal-article
On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2024 | journal-article
Temperature and strain-rate dependence of the superelastic response in EBF3-fabricated and post-heat-treated NiTi shape memory alloy
Journal of Materials Research and Technology
2024 | journal-article
Arc-based directed energy deposited Inconel 718
Materials Research Letters
2024 | journal-article
Comparison of Wire Arc Additive Manufacturing and Subtractive Manufacturing Approaches from an Environmental and Economic Perspective
Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems
2024 | conference-paper
Parametric study and response optimization for the wire + arc additive manufacturing of 316LSi via pulsed GMAW
The International Journal of Advanced Manufacturing Technology
2023 | journal-article
Assessment of the energetic efficiency of friction stir welding/processing
Journal of Manufacturing Processes
2023 | journal-article
Effect of heat treatments on Inconel 625 fabricated by wire and arc additive manufacturing: An in situ synchrotron X-ray diffraction analysis
Science and Technology of Welding and Joining
2023 | journal-article
Flaw Detection in Wire Arc Additive Manufacturing Using In-Situ Acoustic Sensing and Graph Signal Analysis
Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering
2023 | conference-paper
EBSD-data analysis of an additive manufactured maraging 300 steel submitted to different tempering and aging treatments
Materials Characterization
2023 | journal-article
Identifying strategic opportunities through the development of a roadmap for additive manufacturing
Heliyon
2023 | journal-article
Thermal-fluid behavior, microstructure and mechanical properties in liquid bridge transfer mode during directed energy deposition-arc additive manufacturing – Insights using NiTi as a model alloy
Additive Manufacturing
2023 | journal-article
Deformation processes of additively manufactured interstitial-strengthened high entropy alloy
Additive Manufacturing
2023 | journal-article
In situ interlayer hot forging arc plasma directed energy deposition of Inconel® 625
Journal of Alloys and Compounds
2023 | journal-article
Effects of process atmosphere on additively manufactured FeCrAl oxide dispersion strengthened steel: Printability, microstructure and tensile properties
Materials Science and Engineering: A
2023 | journal-article
Spinodal Decomposition of B2-phase and Formation of Cr-Rich Nano-precipitates in AlCoCrFeNi2.1 Eutectic High-Entropy Alloy
Advanced Engineering Materials
2023 | journal-article
Impact of Arc‐Based Welding on the Microstructure Evolution and Mechanical Properties in Newly Developed Cr29.7Co29.7Ni35.4Al4Ti1.2 Multi‐Principal Element Alloy
Advanced Engineering Materials
2023 | journal-article
Impact of Arc‐Based Welding on the Microstructure Evolution and Mechanical Properties in Newly Developed Cr29.7Co29.7Ni35.4Al4Ti1.2 Multi‐Principal Element Alloy
Advanced Engineering Materials
2023 | journal-article
Non-equimolar Cantor high entropy alloy fabrication using metal powder cored wire arc additive manufacturing
Additive Manufacturing Letters
2023 | journal-article
Spatial and directional characterization of wire and arc additive manufactured aluminum alloy using phased array ultrasonic backscattering method
Ultrasonics
2023 | journal-article
Wire and arc additive manufacturing of Fe-based shape memory alloys
Materials and Design
2023 | journal-article
Electrospray Deposition of PEDOT:PSS on Carbon Yarn Electrodes for Solid-State Flexible Supercapacitors
ACS Applied Materials and Interfaces
2023 | journal-article
A novel heterogeneous multi-wire indirect arc directed energy deposition for in-situ synthesis Al-Zn-Mg-Cu alloy
Additive Manufacturing
2023 | journal-article
Evolution of microstructure and mechanical properties in gas tungsten arc welded dual-phase Fe50Mn30Co10Cr10 high entropy alloy
Materials Science and Engineering: A
2023 | journal-article
A Review of Orbital Friction Stir Welding
Metals
2023 | journal-article
A facile blow spinning technique for green cellulose acetate/polystyrene composite separator for flexible energy storage devices
Chemical Engineering Journal
2023 | journal-article
Effects of Heat Input on Weld Microstructure and Properties in Keyhole TIG Welding of Invar 36 Alloy
Materials
2023 | journal-article
A Review on Ultrafast Laser Microwelding of Transparent Materials and Transparent Material–Metals
Metals
2023 | journal-article
Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD
Materials Science and Engineering: A
2023 | journal-article
Life cycle assessment of metal products
Advances in Industrial and Manufacturing Engineering
2023 | journal-article
Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel
Acta Materialia
2023 | journal-article
Effect of abrasive water jet peening on NaCl-induced hot corrosion behavior of Ti–6Al–4V
Vacuum
2023 | journal-article
Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy
Materials Science and Engineering: A
2023 | journal-article
Heat transfer and melt flow of keyhole, transition and conduction modes in laser beam oscillating welding
International Journal Of Heat And Mass Transfer
2023 | journal-article
Role of Pd interlayer on NiTi to Ti6Al4V laser welded joints
Materials and Design
2023 | journal-article
In situ interlayer hot forging arc-based directed energy deposition of Inconel® 625
Additive Manufacturing
2023 | journal-article
Non-Destructive Testing Inspection for Metal Components Produced Using Wire and Arc Additive Manufacturing
Metals
2023 | journal-article
A Short Review on the Corrosion Behaviour of Wire and Arc Additive Manufactured Materials
Metals
2023 | journal-article
Dissimilar laser welding of NiTi to Ti6Al4V via Zr interlayer
Materials and Manufacturing Processes
2023 | journal-article
Microstructure evolution and mechanical properties in a gas tungsten arc welded Fe42Mn28Co10Cr15Si5 metastable high entropy alloy
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2023 | journal-article
Interfacial microstructure and strengthening mechanism of dissimilar laser al/steel joint via a porous high entropy alloy coating
Journal of Materials Research and Technology
2023 | journal-article
Microstructures in arc-welded Al10Co25Cr8Fe15Ni36Ti6 and Al10.87Co21.74Cr21.74Cu2.17Fe21.74Ni21.74 multi-principal element alloys
Materials Today Communications
2023 | journal-article
A coupled computational fluid dynamics approach as a viable tool for thermal history assessment of UNS S32205 duplex stainless steels friction stir welded joints
Welding in the World
2023 | journal-article
Assessing the impact of fusion-based additive manufacturing technologies on green supply chain management performance
Journal of Manufacturing Technology Management
2023 | journal-article
Life Cycle Inventory of Additive Manufacturing Processes
Quality Innovation and Sustainability
2023 | conference-paper
Environmental and economic assessment of a steel wall fabricated by wire-based directed energy deposition
Additive Manufacturing
2023 | journal-article
Crystallographic orientation-dependent deformation characteristics of additive manufactured interstitial-strengthened high entropy alloys
Scripta Materialia
2023 | journal-article
Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal
Scripta Materialia
2023 | journal-article
Monitoring and flaw detection during wire-based directed energy deposition using in-situ acoustic sensing and wavelet graph signal analysis
Materials and Design
2023 | journal-article
Life Cycle Assessment of Wire Arc Additive Manufacturing Process
2023 | book-chapter
A compilation of experimental data on the mechanical properties and microstructural features of Ti-alloys
Scientific Data
2022 | journal-article
Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2022 | journal-article
Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy
Materials and Design
2022 | journal-article
Wire and arc additive manufacturing of 316L stainless steel/Inconel 625 functionally graded material
Journal of Materials Research and Technology
2022 | journal-article
Wire-based directed energy deposition of NiTiTa shape memory alloys
Additive Manufacturing
2022 | journal-article
Controlling the columnar-to-equiaxed transition during Directed Energy Deposition of Inconel 625
Additive Manufacturing
2022 | journal-article
On the short-time thermal phase-stability of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy
Journal of Materials Research and Technology
2022 | journal-article
Numerical Simulation of Ultrasonic Spot Welding of Superelastic NiTi Alloys: Temperature Distribution and Deformation Behavior
Journal of Manufacturing Science and Engineering, Transactions of the ASME
2022 | journal-article
Dynamic wetting and spreading mechanisms regulated by elemental Ni in a Mg/steel immiscible system during laser processing
Journal of Manufacturing Processes
2022 | journal-article
Tuning the microstructure, martensitic transformation and superelastic properties of EBF3-fabricated NiTi shape memory alloy using interlayer remelting
Materials & Design
2022 | journal-article
Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel
Materials & Design
2022 | journal-article
In-situ hot forging directed energy deposition-arc of CuAl8 alloy
Additive Manufacturing
2022 | journal-article
Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer
Journal of Materials Engineering and Performance
2022 | journal-article
Digital Platform for Environmental and Economic Analysis of Wire Arc Additive Manufacturing
Technological Innovation for Digitalization and Virtualization
2022 | conference-paper
Electron beam freeform fabrication of NiTi shape memory alloys: Crystallography, martensitic transformation, and functional response
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2022 | journal-article
Effect of S-curve laser power for power distribution control on laser oscillating welding of 5A06 aluminum alloy
Optics And Laser Technology
2022 | journal-article
The influence of in-situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al–Si coated 22MnB5
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2022 | journal-article
Micro wire and arc additive manufacturing (µ-WAAM)
Additive Manufacturing Letters
2022 | journal-article
Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
Ultrasonics
2022 | journal-article
Effect of contaminations on the acoustic emissions during wire and arc additive manufacturing of 316L stainless steel
Additive Manufacturing
2022 | journal-article
Laser techniques for dissimilar joining of aluminum alloys to steels: A critical review
Journal of Materials Processing Technology
2022 | journal-article
Evaluating the potential use of recycled glass fibers for the development of gypsum-based composites
Construction and Building Materials
2022 | journal-article
Recycling of Reinforced Glass Fibers Waste: Current Status
Materials
2022 | journal-article
On the effect of elemental partitioning to secondary phases after solution and aging heat treatments in a Co-Ni-based superalloy
Materials Letters
2022 | journal-article
Dissimilar laser spot welding of aluminum alloy to steel in keyhole mode
Journal Of Laser Applications
2022 | journal-article
Multi-layer deposition mechanism in ultra high-frequency pulsed wire arc additive manufacturing (WAAM) of NiTi shape memory alloys
Additive Manufacturing
2022 | journal-article
New aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti–6Al–4V alloy
Materials Chemistry And Physics
2022 | journal-article
Functionalized material production via multi-stack Upward Friction Stir Processing (UFSP)
Materials and Manufacturing Processes
2022 | journal-article
Effect of Laser Surfacing on the Microstructure and Mechanical Properties of Ultrasonic Welded NiTi Joints
Journal of Manufacturing Science and Engineering, Transactions of the ASME
2022 | journal-article
Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel
Scripta Materialia
2022 | journal-article
Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM)
Materials & Design
2022 | journal-article
Thermal process and material flow during dissimilar double-sided friction stir spot welding of AZ31/ZK60 magnesium alloys
Journal of Materials Research and Technology
2022 | journal-article
Effect of heat treatments on 316 stainless steel parts fabricated by wire and arc additive manufacturing: Microstructure and synchrotron X-ray diffraction analysis
Additive Manufacturing
2021 | journal-article
In-situ synchrotron X-ray diffraction analysis of the elastic behaviour of martensite and H-phase in a NiTiHf high temperature shape memory alloy fabricated by laser powder bed fusion
Additive Manufacturing Letters
2021 | journal-article
Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fire-resistant steel
Materials Characterization
2021 | journal-article
Wire and Arc Additive Manufacturing of High-Strength Low-Alloy Steel
Advanced Engineering Materials
2021 | journal-article
Deformation-induced martensitic transformation in Co-28Cr-6Mo alloy produced by laser powder bed fusion
Additive Manufacturing
2021 | journal-article
Dissimilar Laser Welding of a NiTi Shape Memory Alloy to Ti2AlNb
Metals
2021 | journal-article
Effect of heat input on interfacial microstructure, tensile and bending properties of dissimilar Al/steel lap joints by laser Welding-brazing
Optics And Laser Technology
2021 | journal-article
Effect of the as-built microstructure on the martensite to austenite transformation in a 18Ni maraging steel after laser-based powder bed fusion
Additive Manufacturing
2021 | journal-article
Ultracold-Wire and arc additive manufacturing (UC-WAAM)
Journal Of Materials Processing Technology
2021 | journal-article
Benchmarking of Nondestructive Testing for Additive Manufacturing
3D Printing and Additive Manufacturing
2021 | journal-article
Superelasticity preservation in dissimilar joint of NiTi shape memory alloy to biomedical PtIr
Materialia
2021 | journal-article
An Overview of High-Entropy Alloys as Biomaterials
Metals
2021 | journal-article
Variable-parameter NiTi ultrasonic spot welding with Cu interlayer
Materials and Manufacturing Processes
2021 | journal-article
Laser welding of H-phase strengthened Ni-rich NiTi-20Zr high temperature shape memory alloy
Materials & Design
2021 | journal-article
Analysis of copper sheets welded by fiber laser with beam oscillation
Optics And Laser Technology
2021 | journal-article
Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy
Optics And Laser Technology
2021 | journal-article
Co–Cr–Mo alloy fabricated by laser powder bed fusion process
International Journal Of Advanced Manufacturing Technology
2021 | journal-article
Microstructural Characterization of Maraging 300 Steel Fabricated by Select Laser Melting
TMS 2021 150th Annual Meeting and Exhibition Supplemental Proceedings
2021 | conference-paper
Effect of milling parameters on HSLA steel parts produced by Wire and Arc Additive Manufacturing (WAAM)
Journal of Manufacturing Processes
2020 | journal-article
Production and characterization of functionally graded NiTi shape memory alloys by Joule effect
Journal of Materials Processing Technology
2020 | journal-article
Correction to: Elemental Effects on Weld Cracking Susceptibility in Al xCoCrCu yFeNi High-Entropy Alloy (Metallurgical and Materials Transactions A, (2020), 51, 2, (778-787), 10.1007/s11661-019-05564-8)
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2020 | other
Effects of Postweld Heat Treatment on the Phase Transformation and Mechanical Behavior of NiTi Ultrasonic Spot Welded Joints With Al Interlayer
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
2020 | journal-article
Hot forging wire and arc additive manufacturing (HF-WAAM)
Additive Manufacturing
2020 | journal-article
In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)
Additive Manufacturing
2020 | journal-article
Prediction of solidification cracking by an empirical-statistical analysis for laser cladding of Inconel 718 powder on a non-weldable substrate
Optics & Laser Technology
2020 | journal-article
Processing parameters in laser powder bed fusion metal additive manufacturing
Materials & Design
2020 | journal-article
Ultrasonic spot welded NiTi joints using an aluminum interlayer: Microstructure and mechanical behavior
Journal of Manufacturing Processes
2020 | journal-article
In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructures
Materials Characterization
2020 | journal-article
Influence of processing parameters on the density of 316L stainless steel parts manufactured through laser powder bed fusion
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2020 | journal-article
Dissimilar laser cladding of Inconel 718 powder on A-286 substrate: Microstructural evolution
Journal of Laser Applications
2020 | journal-article
Gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy
Materials & Design
2020 | journal-article
New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working
Materials Characterization
2020 | journal-article
A Comparative Study of Analytical Rosenthal, Finite Element, and Experimental Approaches in Laser Welding of AA5456 Alloy
Metals
2020 | journal-article
Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical properties
Additive Manufacturing
2020 | journal-article
On the metallurgical joining mechanism during ultrasonic spot welding of NiTi using a Cu interlayer
Scripta Materialia
2020 | journal-article
A Short Review on Welding and Joining of High Entropy Alloys
Metals
2020 | journal-article
Elemental Effects on Weld Cracking Susceptibility in AlxCoCrCuyFeNi High-Entropy Alloy
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2020 | journal-article
Fabrication and characterization of a novel bionic manipulator using a laser processed NiTi shape memory alloy
Optics And Laser Technology
2020 | journal-article
Controlling intermetallic compounds formation during laser welding of NiTi to 316L stainless steel
Intermetallics
2020 | journal-article
Reliability and NDT Methods
Additive Manufacturing Hybrid Processes for Composites Systems
2020 | book-chapter
Aluminium to Carbon Fibre Reinforced Polymer tubes joints produced by magnetic pulse welding
Composite Structures
2019 | journal-article
Double-step inter-critical tempering of a supermartensitic stainless steel: Evolution of hardness, microstructure and elemental partitioning
Materials Characterization
2019 | journal-article
Combining resistance spot welding and friction element welding for dissimilar joining of aluminum to high strength steels
Journal of Materials Processing Technology
2019 | journal-article
Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel
Additive Manufacturing
2019 | journal-article
Microstructure and mechanical properties of gas tungsten arc welded Cu-Al-Mn shape memory alloy rods
Journal of Materials Processing Technology
2019 | journal-article
Fundamentals of isothermal austenite reversion in a Ti-stabilized 12Cr – 6 Ni – 2 Mo super martensitic stainless steel: Thermodynamics versus experimental assessments
Acta Materialia
2019 | journal-article
Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2019 | journal-article
Wire and arc additive manufacturing of HSLA steel: Effect of thermal cycles on microstructure and mechanical properties
Additive Manufacturing
2019 | journal-article
Laser beam oscillating welding of 5A06 aluminum alloys: microstructure, porosity and mechanical properties
Optics And Laser Technology
2019 | journal-article
Non-destructive microstructural analysis by electrical conductivity: Comparison with hardness measurements in different materials
Journal of Materials Science and Technology
2019 | journal-article
Evaluation of the amount of nanoparticles emitted in LASER additive manufacture/welding
Inhalation Toxicology
2019 | journal-article
Laser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: Microstructure and mechanical properties
Materials & Design
2019 | journal-article
Current status and perspectives on wire and arc additive manufacturing (WAAM)
Materials
2019 | journal-article
Laser Welding
Metals
2019 | journal-article
Large-dimension metal parts produced through laser powder bed fusion
METAL 2019 - 28th International Conference on Metallurgy and Materials, Conference Proceedings
2019 | conference-paper
Ni-based Mar-M247 superalloy as a friction stir processing tool
Journal of Materials Processing Technology
2018 | journal-article
Meta-equilibrium transition microstructure for maximum austenite stability and minimum hardness in a Ti-stabilized supermartensitic stainless steel
Materials & Design
2018 | journal-article
Corrigendum: Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys(Smart Materials and Structures(2018) 27 (085020) DOI: 10.1088/1361-665X/aacfeb)
Smart Materials and Structures
2018 | other
Surface Modification of 304 Stainless Steel by Electro-Spark Deposition
Journal of Materials Engineering and Performance
2018 | journal-article
Microstructural Characterization and Mechanical Behavior of NiTi Shape Memory Alloys Ultrasonic Joints Using Cu Interlayer
Materials
2018 | journal-article
Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys
Smart Materials and Structures
2018 | journal-article
Effects of laser processing on the transformation characteristics of NiTi
Scripta Materialia
2018 | journal-article
Effect of Ta and Nb additions in arc-melted Co-Ni-based superalloys: microstructural and mechanical properties
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2018 | journal-article
Laser welding of Cu-Al-Be shape memory alloys: Microstructure and mechanical properties
Materials & Design
2018 | journal-article
Magnetic pulse welding: machine optimisation for aluminium tubular joints production
Science and Technology of Welding and Joining
2018 | journal-article
Compositional analysis on the reverted austenite and tempered martensite in a Ti-stabilized supermartensitic stainless steel: Segregation, partitioning and carbide precipitation
Materials & Design
2018 | journal-article
Compositional analysis on the reverted austenite and tempered martensite in a Ti-stabilized supermartensitic stainless steel: Segregation, partitioning and carbide precipitation
Materials & Design
2018 | journal-article
Laser welding of BTi-6431S high temperature titanium alloy
Metals
2017 | journal-article
Austenite reversion kinetics and stability during tempering of a Ti-stabilized supermartensitic stainless steel: Correlative in situ synchrotron x-ray diffraction and dilatometry
Acta Materialia
2017 | journal-article
Dissimilar laser welding of superelastic NiTi and CuAlMn shape memory alloys
Materials & Design
2017 | journal-article
Influence of ageing treatment on the thermophysical characteristics and mechanical properties of forging wire Ni-rich NiTi alloy for superelastic applications
Ciência & Tecnologia dos Materiais
2017 | journal-article
Production of Al/NiTi composites by friction stir welding assisted by electrical current
Materials & Design
2017 | journal-article
Austenite reversion kinetics and stability during tempering of a Ti-stabilized supermartensitic stainless steel: Correlative in situ synchrotron x-ray diffraction and dilatometry
Acta Materialia
2017 | journal-article
Effect of heat treatments on Ni-Ti endodontic files
Cîencia & Tecnologia dos Materiais
2017 | journal-article
Effect of heat treatments on Ni-Ti endodontic files
Ciência & Tecnologia dos Materiais
2017 | journal-article
Functional fatigue behavior of NiTi-Cu dissimilar laser welds
Materials and Design
2017 | journal-article
Functionally graded NiTi shape memory alloys
Cîencia & Tecnologia dos Materiais
2017 | journal-article
Functionally graded NiTi shape memory alloys
Ciência & Tecnologia dos Materiais
2017 | journal-article
Influence of ageing treatment on the thermophysical characteristics and mechanical properties of forging wire Ni-rich NiTi alloy for superelastic applications
Cîencia & Tecnologia dos Materiais
2017 | journal-article
Laser Welding of BTi-6431S High Temperature Titanium Alloy
Metals
2017 | journal-article
Microstructural characterization of NiTi shape memory alloy produced by rotary hot forging
Powder Diffraction
2017 | journal-article
Microstructural characterization of NiTi shape memory alloy produced by rotary hot forging
Powder Diffraction
2017 | journal-article
Welding and Joining of NiTi Shape Memory Alloys: A Review
Progress in Materials Science
2017 | journal-article
Effect of laser welding parameters on the austenite and martensite phase fractions of NiTi
Materials Characterization
2016 | journal-article
Laser welding of NiTi shape memory alloy wires and tubes for multi-functional design applications
Smart Mater. Struct.
2016 | journal-article
Effect of processing conditions on the properties of recycled cathode ray tube glass foams
J Porous Mater
2016 | journal-article
Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction
Materials & Design
2016 | journal-article
Thermomechanical fatigue of post-weld heat treated NiTi shape memory alloy wires
International Journal of Fatigue
2016 | journal-article
Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys
Materials & Design
2016 | journal-article
Martensite stabilization during superelastic cycling of laser welded NiTi plates
Materials Letters
2016 | journal-article
On the Mechanisms for Martensite Formation in YAG Laser Welded Austenitic NiTi
Shap. Mem. Superelasticity
2016 | journal-article
High strain and long duration cycling behavior of laser welded NiTi sheets
International Journal of Fatigue
2016 | journal-article
Laser joining of NiTi to Ti6Al4V using a Niobium interlayer
Acta Materialia
2016 | journal-article
Laser welded superelastic Cu–Al–Mn shape memory alloy wires
Materials & Design
2016 | journal-article
Erratum: Corrigendum to “Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction” (Mater. Des. (2016) 100 (180–187))
Materials and Design
2016 | journal-article
Laser Welding of Shape Memory Alloys
2016 | dissertation-thesis
Tungsten inert gas (TIG) welding of Ni-rich NiTi plates: Functional behavior
Smart Materials and Structures
2016 | journal-article
Dissimilar laser welding of NiTi shape memory alloy and copper
Smart Mater. Struct.
2015 | journal-article
Fiber laser welding of NiTi to Ti-6Al-4V
Int J Adv Manuf Technol
2015 | journal-article
Effect of heat treatment on K3, K3XF and MTwo endodontic files
MATEC Web of Conferences
2015 | conference-paper
Shape memory effect of laser welded NiTi plates
Funct. Mater. Lett.
2015 | journal-article
XRD Study of NiTi Endodontic Files Using Synchrotron Radiation
J. of Materi Eng and Perform
2014 | journal-article
In Situ Structural Characterization of Laser Welded NiTi Shape Memory Alloys
MSF
2013 | journal-article
Ceramic coatings used as thermal barrier | Revestimentos cerâmicos utilizados como barreira térmica
Ceramica
2013 | journal-article
Correlation Between the Mechanical Cycling Behavior and Microstructure in Laser Welded Joints Using NiTi Shape Memory Alloys
2012 | dissertation-thesis
Correlation between the mechanical cycling behavior and microstructure in laser welded joints using NiTi memory shape alloys
2012 | dissertation-thesis
EFFECTS OF PROCESSING PARAMETERS ON MECHANICAL CYCLING OF LASER WELDED SMAs
Icem15: 15th International Conference on Experimental Mechanics
2012 | journal-article
Effects of processing parameters on mechanical cycling of laser welded SMAs
2012 | conference-paper
Optimization of Ionic Liquid Film Deposition by Spin and Dip Coating Techniques
2012 | journal-article
STRUCTURAL CHARACTERIZATION BY X-RAY DIFFRACTION OF LASER WELDED SHAPE MEMORY ALLOYS
Icem15: 15th International Conference on Experimental Mechanics
2012 | journal-article
Structural characterization by x-ray diffraction of laser welded shape memory alloys
2012 | conference-paper
Mechanical property strengthening by post-heat treatments in NiTiCu shape memory alloys fabricated by twin-wire arc additive manufacturing
Virtual and Physical Prototyping
2025 | journal-article
Achieving excellent plasticity performance in non-equiatomic FCC CoCrFeNiMoMn high-entropy alloys via arc-based direct energy deposition
Materials Science and Engineering: A
2025 | journal-article
Ni-based superalloy 718 fabricated by arc-based directed energy deposition
Materials Science and Engineering: A
2025 | journal-article
Microstructure evolution and local strengthening mechanisms in CoCrFeMnNi high entropy alloy joints reinforced with Inconel 625
Materials Science and Engineering: A
2025 | journal-article
Microstructure characterization of AlCrFeCoNi high-entropy alloy coating on Inconel 718 by electrospark deposition
Materials Characterization
2025 | journal-article
Influence of laser powder bed fusion of high-entropy alloy transition layer on the wetting and spreading behaviour of Al alloy on steel substrate surface
Journal Of Materials Processing Technology
2025 | journal-article
Benchmarking advanced multiphase field modeling of Inconel 625 in additive manufacturing
Materialia
2025 | journal-article
Resistance spot welded NiTi shape memory alloy to Ti6Al4V
Materials and Design
2025 | journal-article
Process development and application of hot forging arc-based additive manufacturing on Haynes® 282 for microstructural and mechanical improvements
Journal of Alloys and Compounds
2025 | journal-article
Analysis of arc regularity and selection of process parameters for WAAM of 316L-Si stainless steel by GMAW-CCC
The International Journal of Advanced Manufacturing Technology
2025 | journal-article
Coupling effect of dynamic power and oscillation path on butt weld formation and melt flow behavior during aluminum alloys
Optics And Laser Technology
2025 | journal-article
Gas tungsten arc welding of CoCrFeMnNi high entropy alloy to 316 stainless steel
Materials Science and Engineering: A
2025 | journal-article
Laser transmission joining of plasma treated polypropylene to stainless steel
Optics And Laser Technology
2025 | journal-article
Excellent strength/ductility synergy by optimization of post-weld heat treatment for gas metal arc welded CoCrFeMnNi high entropy alloys with 410 stainless filler wire
Materials and Design
2025 | journal-article
Grain refinement of Inconel 625 during wire-based directed energy deposition additive manufacturing by in-situ added TiB2 particles: Process development, microstructure evolution and mechanical characterization
Intermetallics
2024 | journal-article
Microstructure and nanomechanical behaviour of wire-arc additive manufactured nickel-based superalloy C276
Progress in Additive Manufacturing
2024 | journal-article
High-strength low-alloy steel fabricated by in situ interlayer hot forging arc-based directed energy deposition assisted with direct cooling
Journal of Manufacturing Processes
2024 | journal-article
Correction to
International Journal Of Advanced Manufacturing Technology
2024 | journal-article
Demystifying “absolute truths” of additive manufacturing
CIRP Journal of Manufacturing Science and Technology
2024 | journal-article
Enhancing microstructural integrity and mechanical performance of thick wire-arc directed energy deposited eutectic aluminum-silicon solid structure through continuous multi-pass friction stir processing
Materials Science and Engineering: A
2024 | journal-article
Gas tungsten arc welding of a multiphase CoCuxFeMnNi (x=20,30) high entropy alloy system: Microstructural differences and their consequences on mechanical performance
Intermetallics
2024 | journal-article
Strengthening synergies of various interlayers in NiTi toTi6Al4V dissimilar laser joints
Journal Of Materials Processing Technology
2024 | journal-article
Mechanical and corrosion characteristics of heat-treated wire arc additive manufactured parts of Inconel ® 625 superalloy
Progress in Additive Manufacturing
2024 | journal-article
Minimizing the maximum von Mises stress of elastic continuum structures using topology optimization and additively manufactured functionally graded materials
Computers and Structures
2024 | journal-article
Wire arc additive manufacturing of a high-strength low-alloy steel part
International Journal Of Advanced Manufacturing Technology
2024 | journal-article
Microstructure and mechanical properties of Al-Zn-Mg-Cu alloy fabricated by multi-wire arc-based directed energy deposition
Journal of Manufacturing Processes
2024 | journal-article
Role of TiB2 inoculation particles during welding of a AlCoCrFeNi high entropy alloy
Journal of Alloys and Compounds
2024 | journal-article
Time-resolved evolution of the deformation mechanisms in a TRIP/TWIP Fe50Mn30Co10Cr10 high entropy during tensile loading probed with synchrotron X-ray diffraction
International Journal of Plasticity
2024 | journal-article
Life cycle assessment and economics of additive manufacturing processes
Additive Manufacturing Materials and Technology
2024 | book-chapter
Cellulose Acetate and Polycaprolactone Fibre Coatings on Medical-Grade Metal Substrates for Controlled Drug Release
Polymers
2024 | journal-article
Ultra-strong and ductile precipitation-strengthened high entropy alloy with 0.5 % Nb addition produced by laser additive manufacturing
Journal of Materials Science and Technology
2024 | journal-article
Microstructure and Phase Transformation Behavior of NiTiCu Shape Memory Alloys Produced Using Twin-Wire Arc Additive Manufacturing
Additive Manufacturing Frontiers
2024 | journal-article
Synergistic effects of Monel 400 filler wire in gas metal arc welding of CoCrFeMnNi high entropy alloy
Materials and Design
2024 | journal-article
High-performance Ni-based superalloy 718 fabricated via arc plasma directed energy deposition
Additive Manufacturing
2024 | journal-article
Precipitation and reverted austenite formation in maraging 350 steel
Acta Materialia
2024 | journal-article
Advancing Sustainable Decision Making in Additive Manufacturing: A Comprehensive Review of Multi-Criteria Decision Making Approaches
Clean Technologies
2024 | journal-article
Development of a gas metal arc based prototype for direct energy deposition with micrometric wire
Journal of Materials Research and Technology
2024 | journal-article
In-situ microstructural evolution during tensile loading of CoCrFeMnNi high entropy alloy welded joint probed by high energy synchrotron X-ray diffraction
Science and Technology of Welding and Joining
2024 | journal-article
Revealing microstructural evolution and mechanical properties of resistance spot welded NiTi-stainless steel with Ni or Nb interlayer
Journal of Materials Science & Technology
2024 | journal-article
Unleashing the microstructural evolutions during hot deformation of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy
Intermetallics
2024 | journal-article
Unveiling the microstructure evolution and mechanical properties in a gas tungsten arc-welded Fe–Mn–Si–Cr–Ni shape memory alloy
Journal of Materials Science
2024 | journal-article
Effects of hatch spacing on pore segregation and mechanical properties during blue laser directed energy deposition of AlSi10Mg
Additive Manufacturing
2024 | journal-article
A holistic approach for evaluation of Gaussian versus ring beam processing on structure and properties in laser powder bed fusion
Journal Of Materials Processing Technology
2024 | journal-article
Effect of defocusing distance on interfacial reaction and mechanical properties of dissimilar laser Al/steel joints with a porous high entropy alloy coating
Materials Characterization
2024 | journal-article
Microstructure gradients across the white etching and transition layers of a heavy haul pearlitic steel
Materials Characterization
2024 | journal-article
Understanding the microstructural evolution and fatigue behavior of aluminum 2319 fabricated by wire arc additive manufacturing
Archives of Civil and Mechanical Engineering
2024 | journal-article
Effect of Al-Si Coating on the Interfacial Microstructure and Corrosion Resistance of Dissimilar Laser Al Alloy/22MnB5 Steel Joints
Metals
2024 | journal-article
Effect of post weld heat treatment on the microstructure and mechanical properties of gas tungsten arc welded Al0.3CoCrFeNi high entropy alloy
Scripta Materialia
2024 | journal-article
Fabrication of spatially-variable heterostructured CoCrFeMnNi high entropy alloy by laser processing
Materials Science and Engineering: A
2024 | journal-article
Laser microwelding as a novel alloying process to fabricate NiTiPtIr high temperature shape memory alloys
Materials Characterization
2024 | journal-article
Residual Stresses in a Wire and Arc-Directed Energy-Deposited Al–6Cu–Mn (ER2319) Alloy Determined by Energy-Dispersive High-Energy X-ray Diffraction
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2024 | journal-article
Unraveling the formation of L12 nano-precipitates within the FCC-phase in AlCoCrFeNi2.1 eutectic high entropy alloy
Vacuum
2024 | journal-article
Evolution of microstructure and deformation mechanisms in a metastable Fe42Mn28Co10Cr15Si5 high entropy alloy
Materials and Design
2024 | journal-article
Phase transformation mechanisms of NiTi shape memory alloy during electromagnetic pulse welding of Al/NiTi dissimilar joints
Materials Science and Engineering: A
2024 | journal-article
On the orientation-dependent mechanical properties of interstitial solute-strengthened Fe49.5Mn30Co10Cr10C0.5 high entropy alloy produced by directed energy deposition
Additive Manufacturing
2024 | journal-article
On the Evolution of Austenite During Tempering in High-Carbon High-Silicon Bearing Steel by High Energy X-Ray Diffraction
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2024 | journal-article
Temperature and strain-rate dependence of the superelastic response in EBF3-fabricated and post-heat-treated NiTi shape memory alloy
Journal of Materials Research and Technology
2024 | journal-article
Arc-based directed energy deposited Inconel 718
Materials Research Letters
2024 | journal-article
Comparison of Wire Arc Additive Manufacturing and Subtractive Manufacturing Approaches from an Environmental and Economic Perspective
Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems
2024 | conference-paper
Parametric study and response optimization for the wire + arc additive manufacturing of 316LSi via pulsed GMAW
The International Journal of Advanced Manufacturing Technology
2023 | journal-article
Assessment of the energetic efficiency of friction stir welding/processing
Journal of Manufacturing Processes
2023 | journal-article
Effect of heat treatments on Inconel 625 fabricated by wire and arc additive manufacturing: An in situ synchrotron X-ray diffraction analysis
Science and Technology of Welding and Joining
2023 | journal-article
Flaw Detection in Wire Arc Additive Manufacturing Using In-Situ Acoustic Sensing and Graph Signal Analysis
Additive Manufacturing; Advanced Materials Manufacturing; Biomanufacturing; Life Cycle Engineering
2023 | conference-paper
EBSD-data analysis of an additive manufactured maraging 300 steel submitted to different tempering and aging treatments
Materials Characterization
2023 | journal-article
Identifying strategic opportunities through the development of a roadmap for additive manufacturing
Heliyon
2023 | journal-article
Thermal-fluid behavior, microstructure and mechanical properties in liquid bridge transfer mode during directed energy deposition-arc additive manufacturing – Insights using NiTi as a model alloy
Additive Manufacturing
2023 | journal-article
Deformation processes of additively manufactured interstitial-strengthened high entropy alloy
Additive Manufacturing
2023 | journal-article
In situ interlayer hot forging arc plasma directed energy deposition of Inconel® 625
Journal of Alloys and Compounds
2023 | journal-article
Effects of process atmosphere on additively manufactured FeCrAl oxide dispersion strengthened steel: Printability, microstructure and tensile properties
Materials Science and Engineering: A
2023 | journal-article
Spinodal Decomposition of B2-phase and Formation of Cr-Rich Nano-precipitates in AlCoCrFeNi2.1 Eutectic High-Entropy Alloy
Advanced Engineering Materials
2023 | journal-article
Impact of Arc‐Based Welding on the Microstructure Evolution and Mechanical Properties in Newly Developed Cr29.7Co29.7Ni35.4Al4Ti1.2 Multi‐Principal Element Alloy
Advanced Engineering Materials
2023 | journal-article
Impact of Arc‐Based Welding on the Microstructure Evolution and Mechanical Properties in Newly Developed Cr29.7Co29.7Ni35.4Al4Ti1.2 Multi‐Principal Element Alloy
Advanced Engineering Materials
2023 | journal-article
Non-equimolar Cantor high entropy alloy fabrication using metal powder cored wire arc additive manufacturing
Additive Manufacturing Letters
2023 | journal-article
Spatial and directional characterization of wire and arc additive manufactured aluminum alloy using phased array ultrasonic backscattering method
Ultrasonics
2023 | journal-article
Wire and arc additive manufacturing of Fe-based shape memory alloys
Materials and Design
2023 | journal-article
Electrospray Deposition of PEDOT:PSS on Carbon Yarn Electrodes for Solid-State Flexible Supercapacitors
ACS Applied Materials and Interfaces
2023 | journal-article
A novel heterogeneous multi-wire indirect arc directed energy deposition for in-situ synthesis Al-Zn-Mg-Cu alloy
Additive Manufacturing
2023 | journal-article
Evolution of microstructure and mechanical properties in gas tungsten arc welded dual-phase Fe50Mn30Co10Cr10 high entropy alloy
Materials Science and Engineering: A
2023 | journal-article
A Review of Orbital Friction Stir Welding
Metals
2023 | journal-article
A facile blow spinning technique for green cellulose acetate/polystyrene composite separator for flexible energy storage devices
Chemical Engineering Journal
2023 | journal-article
Effects of Heat Input on Weld Microstructure and Properties in Keyhole TIG Welding of Invar 36 Alloy
Materials
2023 | journal-article
A Review on Ultrafast Laser Microwelding of Transparent Materials and Transparent Material–Metals
Metals
2023 | journal-article
Deformation behavior and strengthening effects of an eutectic AlCoCrFeNi2.1 high entropy alloy probed by in-situ synchrotron X-ray diffraction and post-mortem EBSD
Materials Science and Engineering: A
2023 | journal-article
Life cycle assessment of metal products
Advances in Industrial and Manufacturing Engineering
2023 | journal-article
Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel
Acta Materialia
2023 | journal-article
Effect of abrasive water jet peening on NaCl-induced hot corrosion behavior of Ti–6Al–4V
Vacuum
2023 | journal-article
Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy
Materials Science and Engineering: A
2023 | journal-article
Heat transfer and melt flow of keyhole, transition and conduction modes in laser beam oscillating welding
International Journal Of Heat And Mass Transfer
2023 | journal-article
Role of Pd interlayer on NiTi to Ti6Al4V laser welded joints
Materials and Design
2023 | journal-article
In situ interlayer hot forging arc-based directed energy deposition of Inconel® 625
Additive Manufacturing
2023 | journal-article
Non-Destructive Testing Inspection for Metal Components Produced Using Wire and Arc Additive Manufacturing
Metals
2023 | journal-article
A Short Review on the Corrosion Behaviour of Wire and Arc Additive Manufactured Materials
Metals
2023 | journal-article
Dissimilar laser welding of NiTi to Ti6Al4V via Zr interlayer
Materials and Manufacturing Processes
2023 | journal-article
Microstructure evolution and mechanical properties in a gas tungsten arc welded Fe42Mn28Co10Cr15Si5 metastable high entropy alloy
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2023 | journal-article
Interfacial microstructure and strengthening mechanism of dissimilar laser al/steel joint via a porous high entropy alloy coating
Journal of Materials Research and Technology
2023 | journal-article
Microstructures in arc-welded Al10Co25Cr8Fe15Ni36Ti6 and Al10.87Co21.74Cr21.74Cu2.17Fe21.74Ni21.74 multi-principal element alloys
Materials Today Communications
2023 | journal-article
A coupled computational fluid dynamics approach as a viable tool for thermal history assessment of UNS S32205 duplex stainless steels friction stir welded joints
Welding in the World
2023 | journal-article
Assessing the impact of fusion-based additive manufacturing technologies on green supply chain management performance
Journal of Manufacturing Technology Management
2023 | journal-article
Life Cycle Inventory of Additive Manufacturing Processes
Quality Innovation and Sustainability
2023 | conference-paper
Environmental and economic assessment of a steel wall fabricated by wire-based directed energy deposition
Additive Manufacturing
2023 | journal-article
Crystallographic orientation-dependent deformation characteristics of additive manufactured interstitial-strengthened high entropy alloys
Scripta Materialia
2023 | journal-article
Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal
Scripta Materialia
2023 | journal-article
Monitoring and flaw detection during wire-based directed energy deposition using in-situ acoustic sensing and wavelet graph signal analysis
Materials and Design
2023 | journal-article
Life Cycle Assessment of Wire Arc Additive Manufacturing Process
2023 | book-chapter
A compilation of experimental data on the mechanical properties and microstructural features of Ti-alloys
Scientific Data
2022 | journal-article
Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2022 | journal-article
Gas tungsten arc welding of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy
Materials and Design
2022 | journal-article
Wire and arc additive manufacturing of 316L stainless steel/Inconel 625 functionally graded material
Journal of Materials Research and Technology
2022 | journal-article
Wire-based directed energy deposition of NiTiTa shape memory alloys
Additive Manufacturing
2022 | journal-article
Controlling the columnar-to-equiaxed transition during Directed Energy Deposition of Inconel 625
Additive Manufacturing
2022 | journal-article
On the short-time thermal phase-stability of as-cast AlCoCrFeNi2.1 eutectic high entropy alloy
Journal of Materials Research and Technology
2022 | journal-article
Numerical Simulation of Ultrasonic Spot Welding of Superelastic NiTi Alloys: Temperature Distribution and Deformation Behavior
Journal of Manufacturing Science and Engineering, Transactions of the ASME
2022 | journal-article
Dynamic wetting and spreading mechanisms regulated by elemental Ni in a Mg/steel immiscible system during laser processing
Journal of Manufacturing Processes
2022 | journal-article
Tuning the microstructure, martensitic transformation and superelastic properties of EBF3-fabricated NiTi shape memory alloy using interlayer remelting
Materials & Design
2022 | journal-article
Improving the ductility in laser welded joints of CoCrFeMnNi high entropy alloy to 316 stainless steel
Materials & Design
2022 | journal-article
In-situ hot forging directed energy deposition-arc of CuAl8 alloy
Additive Manufacturing
2022 | journal-article
Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer
Journal of Materials Engineering and Performance
2022 | journal-article
Digital Platform for Environmental and Economic Analysis of Wire Arc Additive Manufacturing
Technological Innovation for Digitalization and Virtualization
2022 | conference-paper
Electron beam freeform fabrication of NiTi shape memory alloys: Crystallography, martensitic transformation, and functional response
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2022 | journal-article
Effect of S-curve laser power for power distribution control on laser oscillating welding of 5A06 aluminum alloy
Optics And Laser Technology
2022 | journal-article
The influence of in-situ alloying of electro-spark deposited coatings on the multiscale morphological and mechanical properties of laser welded Al–Si coated 22MnB5
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2022 | journal-article
Micro wire and arc additive manufacturing (µ-WAAM)
Additive Manufacturing Letters
2022 | journal-article
Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding
Ultrasonics
2022 | journal-article
Effect of contaminations on the acoustic emissions during wire and arc additive manufacturing of 316L stainless steel
Additive Manufacturing
2022 | journal-article
Laser techniques for dissimilar joining of aluminum alloys to steels: A critical review
Journal of Materials Processing Technology
2022 | journal-article
Evaluating the potential use of recycled glass fibers for the development of gypsum-based composites
Construction and Building Materials
2022 | journal-article
Recycling of Reinforced Glass Fibers Waste: Current Status
Materials
2022 | journal-article
On the effect of elemental partitioning to secondary phases after solution and aging heat treatments in a Co-Ni-based superalloy
Materials Letters
2022 | journal-article
Dissimilar laser spot welding of aluminum alloy to steel in keyhole mode
Journal Of Laser Applications
2022 | journal-article
Multi-layer deposition mechanism in ultra high-frequency pulsed wire arc additive manufacturing (WAAM) of NiTi shape memory alloys
Additive Manufacturing
2022 | journal-article
New aspects of globularization crystallography and dynamic phase evolution during thermomechanical processing of Ti–6Al–4V alloy
Materials Chemistry And Physics
2022 | journal-article
Functionalized material production via multi-stack Upward Friction Stir Processing (UFSP)
Materials and Manufacturing Processes
2022 | journal-article
Effect of Laser Surfacing on the Microstructure and Mechanical Properties of Ultrasonic Welded NiTi Joints
Journal of Manufacturing Science and Engineering, Transactions of the ASME
2022 | journal-article
Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel
Scripta Materialia
2022 | journal-article
Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM)
Materials & Design
2022 | journal-article
Thermal process and material flow during dissimilar double-sided friction stir spot welding of AZ31/ZK60 magnesium alloys
Journal of Materials Research and Technology
2022 | journal-article
Effect of heat treatments on 316 stainless steel parts fabricated by wire and arc additive manufacturing: Microstructure and synchrotron X-ray diffraction analysis
Additive Manufacturing
2021 | journal-article
In-situ synchrotron X-ray diffraction analysis of the elastic behaviour of martensite and H-phase in a NiTiHf high temperature shape memory alloy fabricated by laser powder bed fusion
Additive Manufacturing Letters
2021 | journal-article
Response of ferrite, bainite, martensite, and retained austenite to a fire cycle in a fire-resistant steel
Materials Characterization
2021 | journal-article
Wire and Arc Additive Manufacturing of High-Strength Low-Alloy Steel
Advanced Engineering Materials
2021 | journal-article
Deformation-induced martensitic transformation in Co-28Cr-6Mo alloy produced by laser powder bed fusion
Additive Manufacturing
2021 | journal-article
Dissimilar Laser Welding of a NiTi Shape Memory Alloy to Ti2AlNb
Metals
2021 | journal-article
Effect of heat input on interfacial microstructure, tensile and bending properties of dissimilar Al/steel lap joints by laser Welding-brazing
Optics And Laser Technology
2021 | journal-article
Effect of the as-built microstructure on the martensite to austenite transformation in a 18Ni maraging steel after laser-based powder bed fusion
Additive Manufacturing
2021 | journal-article
Ultracold-Wire and arc additive manufacturing (UC-WAAM)
Journal Of Materials Processing Technology
2021 | journal-article
Benchmarking of Nondestructive Testing for Additive Manufacturing
3D Printing and Additive Manufacturing
2021 | journal-article
Superelasticity preservation in dissimilar joint of NiTi shape memory alloy to biomedical PtIr
Materialia
2021 | journal-article
An Overview of High-Entropy Alloys as Biomaterials
Metals
2021 | journal-article
Variable-parameter NiTi ultrasonic spot welding with Cu interlayer
Materials and Manufacturing Processes
2021 | journal-article
Laser welding of H-phase strengthened Ni-rich NiTi-20Zr high temperature shape memory alloy
Materials & Design
2021 | journal-article
Analysis of copper sheets welded by fiber laser with beam oscillation
Optics And Laser Technology
2021 | journal-article
Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy
Optics And Laser Technology
2021 | journal-article
Co–Cr–Mo alloy fabricated by laser powder bed fusion process
International Journal Of Advanced Manufacturing Technology
2021 | journal-article
Microstructural Characterization of Maraging 300 Steel Fabricated by Select Laser Melting
TMS 2021 150th Annual Meeting and Exhibition Supplemental Proceedings
2021 | conference-paper
Effect of milling parameters on HSLA steel parts produced by Wire and Arc Additive Manufacturing (WAAM)
Journal of Manufacturing Processes
2020 | journal-article
Production and characterization of functionally graded NiTi shape memory alloys by Joule effect
Journal of Materials Processing Technology
2020 | journal-article
Correction to: Elemental Effects on Weld Cracking Susceptibility in Al xCoCrCu yFeNi High-Entropy Alloy (Metallurgical and Materials Transactions A, (2020), 51, 2, (778-787), 10.1007/s11661-019-05564-8)
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2020 | other
Effects of Postweld Heat Treatment on the Phase Transformation and Mechanical Behavior of NiTi Ultrasonic Spot Welded Joints With Al Interlayer
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
2020 | journal-article
Hot forging wire and arc additive manufacturing (HF-WAAM)
Additive Manufacturing
2020 | journal-article
In-situ strengthening of a high strength low alloy steel during Wire and Arc Additive Manufacturing (WAAM)
Additive Manufacturing
2020 | journal-article
Prediction of solidification cracking by an empirical-statistical analysis for laser cladding of Inconel 718 powder on a non-weldable substrate
Optics & Laser Technology
2020 | journal-article
Processing parameters in laser powder bed fusion metal additive manufacturing
Materials & Design
2020 | journal-article
Ultrasonic spot welded NiTi joints using an aluminum interlayer: Microstructure and mechanical behavior
Journal of Manufacturing Processes
2020 | journal-article
In-situ synchrotron radiation study of the aging response of Ti-6Al-4V alloy with different starting microstructures
Materials Characterization
2020 | journal-article
Influence of processing parameters on the density of 316L stainless steel parts manufactured through laser powder bed fusion
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2020 | journal-article
Dissimilar laser cladding of Inconel 718 powder on A-286 substrate: Microstructural evolution
Journal of Laser Applications
2020 | journal-article
Gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy
Materials & Design
2020 | journal-article
New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working
Materials Characterization
2020 | journal-article
A Comparative Study of Analytical Rosenthal, Finite Element, and Experimental Approaches in Laser Welding of AA5456 Alloy
Metals
2020 | journal-article
Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical properties
Additive Manufacturing
2020 | journal-article
On the metallurgical joining mechanism during ultrasonic spot welding of NiTi using a Cu interlayer
Scripta Materialia
2020 | journal-article
A Short Review on Welding and Joining of High Entropy Alloys
Metals
2020 | journal-article
Elemental Effects on Weld Cracking Susceptibility in AlxCoCrCuyFeNi High-Entropy Alloy
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2020 | journal-article
Fabrication and characterization of a novel bionic manipulator using a laser processed NiTi shape memory alloy
Optics And Laser Technology
2020 | journal-article
Controlling intermetallic compounds formation during laser welding of NiTi to 316L stainless steel
Intermetallics
2020 | journal-article
Reliability and NDT Methods
Additive Manufacturing Hybrid Processes for Composites Systems
2020 | book-chapter
Aluminium to Carbon Fibre Reinforced Polymer tubes joints produced by magnetic pulse welding
Composite Structures
2019 | journal-article
Double-step inter-critical tempering of a supermartensitic stainless steel: Evolution of hardness, microstructure and elemental partitioning
Materials Characterization
2019 | journal-article
Combining resistance spot welding and friction element welding for dissimilar joining of aluminum to high strength steels
Journal of Materials Processing Technology
2019 | journal-article
Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel
Additive Manufacturing
2019 | journal-article
Microstructure and mechanical properties of gas tungsten arc welded Cu-Al-Mn shape memory alloy rods
Journal of Materials Processing Technology
2019 | journal-article
Fundamentals of isothermal austenite reversion in a Ti-stabilized 12Cr – 6 Ni – 2 Mo super martensitic stainless steel: Thermodynamics versus experimental assessments
Acta Materialia
2019 | journal-article
Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2019 | journal-article
Wire and arc additive manufacturing of HSLA steel: Effect of thermal cycles on microstructure and mechanical properties
Additive Manufacturing
2019 | journal-article
Laser beam oscillating welding of 5A06 aluminum alloys: microstructure, porosity and mechanical properties
Optics And Laser Technology
2019 | journal-article
Non-destructive microstructural analysis by electrical conductivity: Comparison with hardness measurements in different materials
Journal of Materials Science and Technology
2019 | journal-article
Evaluation of the amount of nanoparticles emitted in LASER additive manufacture/welding
Inhalation Toxicology
2019 | journal-article
Laser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: Microstructure and mechanical properties
Materials & Design
2019 | journal-article
Current status and perspectives on wire and arc additive manufacturing (WAAM)
Materials
2019 | journal-article
Laser Welding
Metals
2019 | journal-article
Large-dimension metal parts produced through laser powder bed fusion
METAL 2019 - 28th International Conference on Metallurgy and Materials, Conference Proceedings
2019 | conference-paper
Ni-based Mar-M247 superalloy as a friction stir processing tool
Journal of Materials Processing Technology
2018 | journal-article
Meta-equilibrium transition microstructure for maximum austenite stability and minimum hardness in a Ti-stabilized supermartensitic stainless steel
Materials & Design
2018 | journal-article
Corrigendum: Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys(Smart Materials and Structures(2018) 27 (085020) DOI: 10.1088/1361-665X/aacfeb)
Smart Materials and Structures
2018 | other
Surface Modification of 304 Stainless Steel by Electro-Spark Deposition
Journal of Materials Engineering and Performance
2018 | journal-article
Microstructural Characterization and Mechanical Behavior of NiTi Shape Memory Alloys Ultrasonic Joints Using Cu Interlayer
Materials
2018 | journal-article
Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys
Smart Materials and Structures
2018 | journal-article
Effects of laser processing on the transformation characteristics of NiTi
Scripta Materialia
2018 | journal-article
Effect of Ta and Nb additions in arc-melted Co-Ni-based superalloys: microstructural and mechanical properties
Materials Science and Engineering: A-Structural Materials Properties Microstructure and Processing
2018 | journal-article
Laser welding of Cu-Al-Be shape memory alloys: Microstructure and mechanical properties
Materials & Design
2018 | journal-article
Magnetic pulse welding: machine optimisation for aluminium tubular joints production
Science and Technology of Welding and Joining
2018 | journal-article
Compositional analysis on the reverted austenite and tempered martensite in a Ti-stabilized supermartensitic stainless steel: Segregation, partitioning and carbide precipitation
Materials & Design
2018 | journal-article
Compositional analysis on the reverted austenite and tempered martensite in a Ti-stabilized supermartensitic stainless steel: Segregation, partitioning and carbide precipitation
Materials & Design
2018 | journal-article
Laser welding of BTi-6431S high temperature titanium alloy
Metals
2017 | journal-article
Austenite reversion kinetics and stability during tempering of a Ti-stabilized supermartensitic stainless steel: Correlative in situ synchrotron x-ray diffraction and dilatometry
Acta Materialia
2017 | journal-article
Dissimilar laser welding of superelastic NiTi and CuAlMn shape memory alloys
Materials & Design
2017 | journal-article
Influence of ageing treatment on the thermophysical characteristics and mechanical properties of forging wire Ni-rich NiTi alloy for superelastic applications
Ciência & Tecnologia dos Materiais
2017 | journal-article
Production of Al/NiTi composites by friction stir welding assisted by electrical current
Materials & Design
2017 | journal-article
Austenite reversion kinetics and stability during tempering of a Ti-stabilized supermartensitic stainless steel: Correlative in situ synchrotron x-ray diffraction and dilatometry
Acta Materialia
2017 | journal-article
Effect of heat treatments on Ni-Ti endodontic files
Cîencia & Tecnologia dos Materiais
2017 | journal-article
Effect of heat treatments on Ni-Ti endodontic files
Ciência & Tecnologia dos Materiais
2017 | journal-article
Functional fatigue behavior of NiTi-Cu dissimilar laser welds
Materials and Design
2017 | journal-article
Functionally graded NiTi shape memory alloys
Cîencia & Tecnologia dos Materiais
2017 | journal-article
Functionally graded NiTi shape memory alloys
Ciência & Tecnologia dos Materiais
2017 | journal-article
Influence of ageing treatment on the thermophysical characteristics and mechanical properties of forging wire Ni-rich NiTi alloy for superelastic applications
Cîencia & Tecnologia dos Materiais
2017 | journal-article
Laser Welding of BTi-6431S High Temperature Titanium Alloy
Metals
2017 | journal-article
Microstructural characterization of NiTi shape memory alloy produced by rotary hot forging
Powder Diffraction
2017 | journal-article
Microstructural characterization of NiTi shape memory alloy produced by rotary hot forging
Powder Diffraction
2017 | journal-article
Welding and Joining of NiTi Shape Memory Alloys: A Review
Progress in Materials Science
2017 | journal-article
Effect of laser welding parameters on the austenite and martensite phase fractions of NiTi
Materials Characterization
2016 | journal-article
Laser welding of NiTi shape memory alloy wires and tubes for multi-functional design applications
Smart Mater. Struct.
2016 | journal-article
Effect of processing conditions on the properties of recycled cathode ray tube glass foams
J Porous Mater
2016 | journal-article
Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction
Materials & Design
2016 | journal-article
Thermomechanical fatigue of post-weld heat treated NiTi shape memory alloy wires
International Journal of Fatigue
2016 | journal-article
Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys
Materials & Design
2016 | journal-article
Martensite stabilization during superelastic cycling of laser welded NiTi plates
Materials Letters
2016 | journal-article
On the Mechanisms for Martensite Formation in YAG Laser Welded Austenitic NiTi
Shap. Mem. Superelasticity
2016 | journal-article
High strain and long duration cycling behavior of laser welded NiTi sheets
International Journal of Fatigue
2016 | journal-article
Laser joining of NiTi to Ti6Al4V using a Niobium interlayer
Acta Materialia
2016 | journal-article
Laser welded superelastic Cu–Al–Mn shape memory alloy wires
Materials & Design
2016 | journal-article
Erratum: Corrigendum to “Residual stress analysis in laser welded NiTi sheets using synchrotron X-ray diffraction” (Mater. Des. (2016) 100 (180–187))
Materials and Design
2016 | journal-article
Laser Welding of Shape Memory Alloys
2016 | dissertation-thesis
Tungsten inert gas (TIG) welding of Ni-rich NiTi plates: Functional behavior
Smart Materials and Structures
2016 | journal-article
Dissimilar laser welding of NiTi shape memory alloy and copper
Smart Mater. Struct.
2015 | journal-article
Fiber laser welding of NiTi to Ti-6Al-4V
Int J Adv Manuf Technol
2015 | journal-article
Effect of heat treatment on K3, K3XF and MTwo endodontic files
MATEC Web of Conferences
2015 | conference-paper
Shape memory effect of laser welded NiTi plates
Funct. Mater. Lett.
2015 | journal-article
XRD Study of NiTi Endodontic Files Using Synchrotron Radiation
J. of Materi Eng and Perform
2014 | journal-article
In Situ Structural Characterization of Laser Welded NiTi Shape Memory Alloys
MSF
2013 | journal-article
Ceramic coatings used as thermal barrier | Revestimentos cerâmicos utilizados como barreira térmica
Ceramica
2013 | journal-article
Correlation Between the Mechanical Cycling Behavior and Microstructure in Laser Welded Joints Using NiTi Shape Memory Alloys
2012 | dissertation-thesis
Correlation between the mechanical cycling behavior and microstructure in laser welded joints using NiTi memory shape alloys
2012 | dissertation-thesis
EFFECTS OF PROCESSING PARAMETERS ON MECHANICAL CYCLING OF LASER WELDED SMAs
Icem15: 15th International Conference on Experimental Mechanics
2012 | journal-article
Effects of processing parameters on mechanical cycling of laser welded SMAs
2012 | conference-paper
Optimization of Ionic Liquid Film Deposition by Spin and Dip Coating Techniques
2012 | journal-article
STRUCTURAL CHARACTERIZATION BY X-RAY DIFFRACTION OF LASER WELDED SHAPE MEMORY ALLOYS
Icem15: 15th International Conference on Experimental Mechanics
2012 | journal-article
Structural characterization by x-ray diffraction of laser welded shape memory alloys
2012 | conference-paper