Enhancing Fire Resistance: A Thermal and Structural Optimization Approach for Fire Door Frame Using Numerical Simulation

Fire

2026 | journal-article

Enhancing Fire Resistance: A Thermal and Structural Optimization Approach for Fire Door Frame Using Numerical Simulation

2026 | preprint

Energy simulations of an existing villa converted into a nZEB building with assessment of the human thermal comfort

Applied Thermal Engineering

2025 | journal-article

CFD Simulation of the Smoke Control Process in an Underground Parking Lot—The Impact of Fire Location

2025 | book-chapter

DEVELOPING FOUNDATIONAL RESEARCH SKILLS: AN UNDERGRADUATE INITIATIVE ACROSS FIVE ENGINEERING DISCIPLINES

PROCEEDINGS OF ASME 2025 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2025, VOL 7

2025 | journal-article

Energy Poverty and Its Indicators: A Multidimensional Framework from Literature

Energies

2024 | journal-article

Intelligent In situ Printing of Multimaterial Bioinks for First-Aid Wound Care Guided by Eye-In-Hand Robot Technology

ADVANCED MATERIALS TECHNOLOGIES

2024 | preprint

Numerical evaluation and experimental validation of fluid flow behavior within an organ-on-a-chip model

COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE

2024 | journal-article

Optimization of the Flow Parameters for a Liver Organ-on-a-Chip Computational Model

ASME 2023 International Mechanical Engineering Congress and Exposition (IMECE2023)

2023 | conference-paper

ASSESSMENT OF THE THERMAL COMFORT AND CO2 DISTRIBUTION WITHIN A MOVIE THEATRE

PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 10

2023 | conference-paper

Dense-Discrete Phase Simulations of Blood Flow in a Stenotic Coronary

COMPUTER METHODS, IMAGING AND VISUALIZATION IN BIOMECHANICS AND BIOMEDICAL ENGINEERING II

2023 | conference-paper

Different Teaching Methods

Advances in Educational Technologies and Instructional Design

2023 | book-chapter

OPTIMIZATION OF THE FLOW PARAMETERS FOR A LIVER ORGAN-ON-A-CHIP COMPUTATIONAL MODEL

PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 5

2023 | conference-paper

SIMULATION AND EXPERIMENTAL VALIDATION OF A MICROFLUIDIC DEVICE

PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 5

2023 | conference-paper

Skin Follicles Dispersion Within a Hospital Operating Room—How to Predict and Reduce the Contamination

Studies in Systems, Decision and Control

2023 | book-chapter

Thermal Comfort Assessment of a Small House in Portugal Using EnergyPlus and Ansys Fluent

Lecture Notes in Electrical Engineering

2023 | conference-paper

Assessment of PMV accuracy for different locations using the ASHRAE Thermal Comfort Database II

XV Congreso Iberoamericano de Ingeniería Mecánica

2022 | conference-paper

2D SIMULATION OF THE PLACEMENT OF A PIN-THROUGH-HOLE COMPONENT AND SOLDER PASTE MELTING

ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022)

2022 | conference-paper

Influence of the Inlet Velocity on Oxygen Gradients in a Liver-on-a-Chip Model

2022 ASME IMECE

2022 | conference-paper

Study of the Influence of Different Geometries of an Organ-on-a-Chip

2022 ASME IMECE

2022 | conference-paper

Learning through planning experiments - A case study in thermal comfort in hospitals

CISTI'2022 - 17th Iberian Conference on Information Systems and Technologies

2022 | conference-paper

Analysis of the human influence on the thermal comfort in a hospital waiting room.

ECCOMAS 2022

2022 | conference-abstract

2D SIMULATION OF THE PLACEMENT OF A PIN-THROUGH-HOLE COMPONENT AND SOLDER PASTE MELTING

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2022 | conference-paper

COMPUTATIONAL ANALYSIS OF OXYGEN TRANSPORT IN A LIVER-ON-A-CHIP PLATFORM

Proceedings of the Thermal and Fluids Engineering Summer Conference

2022 | conference-paper

Energy, Thermal Comfort and Pathologies—A Current Concern

Studies in Systems, Decision and Control

2022 | book-chapter

Influence of boundary conditions on oxygen distribution in an organ-on-a-chip platform

8th European Congress on Computational Methods in Applied Sciences and Engineering

2022 | conference-abstract

Influence of the Inlet Velocity in Oxygen Gradients in a Liver-on-a-Chip Model

ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022)

2022 | conference-abstract

Learning through planning experiments A case study in thermal comfort in hospitals

2022 17TH IBERIAN CONFERENCE ON INFORMATION SYSTEMS AND TECHNOLOGIES (CISTI)

2022 | conference-paper

Numerical Modeling of the Wave Soldering Process and Experimental Validation

JOURNAL OF ELECTRONIC PACKAGING

2022 | journal-article

SUMMER GRANTS 'VERAO COM CIENCIA', FROM FOUNDATION FOR SCIENCE AND TECHNOLOGY, IN PORTUGAL: EXPERIENCE AND ACHIEVEMENTS

PROCEEDINGS OF ASME 2022 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2022, VOL 7

2022 | conference-paper

Skin follicles dispersion within a hospital operating room – How to predict and reduce the contamination

2022 | book-chapter

Study of the Influence of Different Geometries of an Organ-on-a-Chip on Fluid Flow

ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022)

2022 | conference-abstract

Summer Grants ‘Verão Com Ciência’, From Foundation for Science and Technology, in Portugal: Experience and Achievements

ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022)

2022 | conference-abstract

Numerical Simulation of Solder Paste Printing on Through-Hole Components

IMECE2021 - International Mechanical Engineering Congress and Exposition

2021 | conference-paper

Numerical Simulation of the Flow Inside a Horizontal Closed Refrigerated Display Cabinet

IMECE2021 - International Mechanical Engineering Congress and Exposition

2021 | conference-paper

Numerical simulation: Study on the path of expelled and expired water vapor particles

i9MAKS WORKSHOP

2021 | conference-abstract

Numerical Simulation: Study on the path of expelled and exhaled water vapor particles

International Conference on Numerical and Symbolic Computation - Symcomp

2021 | conference-paper

Business Analytical Framework for the Manufacturing Industry

IEEE International Conference on Industrial Informatics (INDIN)

2021 | conference-paper

Experimental measurements of the shear force on surface mount components simulating the wave soldering process

SOLDERING & SURFACE MOUNT TECHNOLOGY

2021 | preprint

NUMERICAL SIMULATION OF SOLDER PASTE PRINTING ON THROUGH-HOLE COMPONENTS

PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 2A

2021 | conference-paper

NUMERICAL SIMULATION OF THE FLOW INSIDE A HORIZONTAL CLOSED REFRIGERATED DISPLAY CABINET

PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 10

2021 | conference-paper

New Performance Metrics for Offline Content-Based TV Recommender System

Communications in Computer and Information Science

2021 | conference-paper

Prediction of Solder Joint Reliability with Applied Acrylic Conformal Coating

JOURNAL OF ELECTRONIC MATERIALS

2021 | preprint

3D Printed Biomodels for Flow Visualization in Stenotic Vessels: An Experimental and Numerical Study

MICROMACHINES

2020 | journal-article

Energy Performance of a Service Building: Comparison Between EnergyPlus and Revit

COMPUTATIONAL SCIENCE AND ITS APPLICATIONS - ICCSA 2020, PT VI

2020 | conference-paper

Hemodynamic study in 3D printed stenotic coronary artery models: experimental validation and transient simulation

COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING

2020 | preprint

Modeling Blood Pulsatile Turbulent Flow in Stenotic Coronary Arteries

International Journal of Biology and Biomedical Engineering

2020 | journal-article

Numerical simulation of blood pulsatile flow in stenotic coronary arteries: The effect of turbulence modeling and non-Newtonian assumptions

Proceedings - 24th International Conference on Circuits, Systems, Communications and Computers, CSCC 2020

2020 | conference-paper

Thermal Simulation of a Supermarket Cold Zone with Integrated Assessment of Human Thermal Comfort

COMPUTATIONAL SCIENCE AND ITS APPLICATIONS - ICCSA 2020, PT VI

2020 | conference-paper

A NUMERICAL STUDY OF SOLDER PASTE ROLLING PROCESS FOR PCB PRINTING

PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 2

2019 | conference-paper

Assessment of Indoor Thermal Conditions in a Cinema Room Using CFD Simulation: A Case Study

COMPUTATIONAL SCIENCE AND ITS APPLICATIONS - ICCSA 2019, PT VI

2019 | conference-paper

Simulation of PMV and PPD Thermal Comfort Using EnergyPlus

COMPUTATIONAL SCIENCE AND ITS APPLICATIONS - ICCSA 2019, PT VI

2019 | conference-paper

Thermal comfort assessment of orthopaedic health professionals in an operating room

OCCUPATIONAL SAFETY AND HYGIENE VI

2018 | conference-paper

Modelação computacional do ambiente térmico num pavilhão fabril

6º Encontro Nacional de Engenharia e Gestão Industrial

2017 | conference-abstract

Avaliação do conforto térmico numa sala de operações com recurso ao PMV

6º Encontro Nacional de Engenharia e Gestão Industrial

2017 | conference-abstract

Modelação computacional e avaliação experimental do conforto térmico ocupacional em salas de operação

Universidade do Minho - Campus de Azurém

2017 | dissertation-thesis

Metabolic rate evaluation of an orthopedic surgeon through oximetry

International Symposium on Occupational Safety and Hygiene: SHO2017

2017 | conference-abstract

CFD MODELING THE COOLING STAGE OF REFLOW SOLDERING PROCESS

PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2

2017 | conference-paper

Modelação computacional e avaliação experimental do conforto térmico ocupacional em salas de operação

2017 | dissertation-thesis

Numerical simulation of an industrial worker route using thermal human body software

4th International Conference on Contemporary Problems of Thermal Engineering CPOTE 2016

2016 | conference-abstract

A protocol example on calculation of the metabolism for surgeons in an operating room

International Symposium on Occupational Safety and Hygiene

2016 | conference-paper

Contact angle measurement of SAC 305 solder: numerical and experimental approach

Journal of Materials Science: Materials in Electronics

2016 | journal-article

Numerical simulation of an industrial worker route using thermal human body software

2016 | conference-paper

Evaluation of thermal comfort levels concerning the spatial arrangement in an operating room

Intemational Symposium on Occupational Safety and Hygiene: SHO2015

2015 | conference-abstract

Testing a human thermal software using field investigation from an industrial plant

Intemational Symposium on Occupational Safety and Hygiene: SHO2015

2015 | conference-abstract

Evaluation of thermal comfort levels concerning the spatial arrangement in an operating room

SHO2015

2015 | conference-paper

MODELING THE REFLOW SOLDERING PROCESS IN PCB'S

INTERNATIONAL TECHNICAL CONFERENCE AND EXHIBITION ON PACKAGING AND INTEGRATION OF ELECTRONIC AND PHOTONIC MICROSYSTEMS, 2015, VOL 2

2015 | conference-paper

Thermal comfort assessment of a surgical room through computational fluid dynamics using local PMV index

Work

2015 | journal-article

Sensibility studies on a transient therml model of the human body

14th International Conference on Computational Science and Its Applications (ICCSA 2014)

2014 | conference-abstract

Modeling the thermal environment in an operating room

Proceedings of the 15th International Heat Transfer Conference, IHTC 2014

2014 | conference-paper

One-way coupling between a CFD model and a transient thermal model of the human body

OCCUPATIONAL SAFETY AND HYGIENE II

2014 | conference-paper

Sensibility studies on a transient thermal model of the human body

2014 14TH INTERNATIONAL CONFERENCE ON COMPUTATIONAL SCIENCE AND ITS APPLICATIONS (ICCSA)

2014 | conference-paper

Thermal environment characterisation using a CFD model

Workshop MMNSEA’13 – "Mathematical Modelling and Numerical Simulation for Engineering

2013 | conference-poster

Thermal comfort evaluation of an operating room through CFD methodology

OCCUPATIONAL SAFETY AND HYGIENE

2013 | conference-paper

Characterisation of the occupational thermal environment of operating rooms

European Academy of Occupational Health Psychology

2012 | conference-poster

Thermal comfort in operating rooms, Proceedings do Colóquio Internacional sobre Segurança e Higiene Ocupacionais

Occupational Safety and Hygiene - SHO 2012

2012 | conference-abstract

EXPERIMENTAL VALIDATION OF A CFD MODEL IN A THERMAL ENVIRONMENT CHARACTERIZATION

PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2011, VOL 2

2012 | conference-paper

Caracterização do ambiente térmico computacional em salas de operação – construção de um modelo CFD

Universidade do Minho

2011 | dissertation-thesis

Caracterização do ambiente térmico computacional em salas de operação – construção de um modelo CFD

Universidade do Minho

2011 | dissertation-thesis

Caracterização do ambiente térmico ocupacional de salas de operação – construção de um modelo CFD

11º Fórum Nacional de medicina no trabalho Lisboa

2011 | conference-abstract

Ferramentas de CFD na avaliação do conforto térmico

Encontro Nacional de Engenharia e Gestão Industrial

2011 | conference-abstract

Validação experimental dm modelo CFD na caracterização de um ambiente térmico ocupacional

4º Congresso Nacional de Biomecânica

2011 | conference-paper

Validação experimental de um modelo CFD na caracterização de um ambiente térmico ocupacional

4º Congresso Nacional de Biomecânica

2011 | conference-abstract