Algoritmi | User | João Paulo Davim Tavares da Silva

João Paulo Davim Tavares da Silva

João Paulo Davim Tavares da Silva

At LASI

Member of the TEMA R&D Unit

Academic Degree

Current Position

at

Personal Webpage

Personal Email

Orcid

0000-0002-5659-3111

Researcher ID

FCT Public Key

Ciência ID

5F16-E3E2-48BC

Google Scholar

About Me



Multi-Objective Robotics Optimization Using Improved MO-BxR Algorithms

Applied Sciences

2026 | journal-article

Experimental Study on Drilling Performance of Bio-Waste-Based Corn Husk Fiber Reinforced Epoxy Composites for Green Applications

Journal of Manufacturing and Materials Processing

2026 | journal-article

Numerical and experimental analysis of machinability aspects and surface damage in drilling MD-CFRP laminates

Composites Part B Engineering

2026 | journal-article

Optimization of Different Metal Casting Processes Using Three Simple and Efficient Advanced Algorithms

Metals

2025 | journal-article

Advancements in Hole Quality for AISI 1045 Steel Using Helical Milling

Journal of Manufacturing and Materials Processing

2025 | journal-article

Titanium alloys for medical applications - A brief review

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

2025 | journal-article

Single, Multi-, and Many-Objective Optimization of Manufacturing Processes Using Two Novel and Efficient Algorithms with Integrated Decision-Making

Journal of Manufacturing and Materials Processing

2025 | journal-article

Multi-Objective Optimisation of Hybrid Banana/Sisal/Red Mud Composites Using Taguchi–Grey Relational Analysis

Journal of Composites Science

2025 | journal-article

Investigation of kerf taper angle and surface roughness in abrasive water jet machined glass fiber-reinforced polyester composites

Advanced Engineering Letters

2025 | journal-article

3D printing assisted corrective orthopedic surgery of veterinary patients

Additive Manufacturing Solutions for Advanced Veterinary Practice Clinical Dentistry Orthopedic and Drug Delivery Methods

2025 | book-chapter

A Review on CAD-Based Programming for Design and Manufacturing

2025 | book-chapter

AI Based Solutions for Inclusive Quality Education

AI Based Solutions for Inclusive Quality Education

2025 | book

An experimental study for ductile mode control on cemented carbide micro-milling

International Journal of Refractory Metals and Hard Materials

2025 | journal-article

Automated Assembly of Mechanical Systems: A Case Study

2025 | book-chapter

Automated Design of Mechanical Parts: A Case Study

2025 | book-chapter

CAD-based Programming for Design and Manufacturing

2025 | book

Challenges and Opportunities in the Artificial Intelligence Era

Challenges and Opportunities in the Artificial Intelligence Era

2025 | book

Chemical Engineering Essentials 1: Comprehensive Chemical Engineering

Chemical Engineering Essentials Volume 1 Comprehensive Chemical Engineering

2025 | book

Chemical Engineering Essentials, Volume 2: Advanced Processes, Materials, and Sustainability

Chemical Engineering Essentials Volume 2 Advanced Processes Materials and Sustainability

2025 | book

Corporate governance for climate transition

Global Change, Peace & Security

2025 | journal-article

Design and fabrication of 3D printed strip for sensing of bone healing after comminuted fracture

Additive Manufacturing Solutions for Advanced Veterinary Practice Clinical Dentistry Orthopedic and Drug Delivery Methods

2025 | book-chapter

Differential equations: A bibliometric analysis

Advances in Differential Equations and Control Processes

2025 | journal-article

Editorial: Additive manufacturing: a bibliometric analysis

International Journal of Materials Engineering Innovation

2025 | journal-article

Editorial: Machinability: a bibliometric analysis

International Journal of Machining and Machinability of Materials

2025 | journal-article

Editorial: Tribology: a bibliometric analysis

International Journal of Surface Science and Engineering

2025 | journal-article

From Industry 4.0 to Industry 6.0

From Industry 4.0 to Industry 6.0

2025 | book

Innovation Management: In Research and Industry

Innovation Management in Research and Industry

2025 | book

Integration of CAD Software Programming for G-code Generation

2025 | book-chapter

Introduction

Sustainable Packaging Strengthened by Biomass Applications and Advancements

2025 | book

Management in Higher Education for Sustainability: Challenges and Ways Forward—A Glance

2025 | book-chapter

Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing

Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing

2025 | book

Nanostructured Thin Film Deposition by Sputtering

Nanostructured Thin Film Deposition by Sputtering from Fundamentals to Applications

2025 | book

Numerical study addressing the CER effect on microscopic chip removal mechanisms of CFRPs via the orthogonal cutting

Composites Part B Engineering

2025 | journal-article

Perceptions of Industry 5.0: Sustainability Perspective

BioResources

2025 | journal-article

Powder Metallurgy

Powder Metallurgy Characterization Processing and Optimization Techniques

2025 | book

Preface

Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing

2025 | book

Preface

From Industry 4.0 to Industry 6.0

2025 | book

Preface

Technopreneurship and Sustainability: Innovation, Challenges, and Opportunities

2025 | book

Preface

Chemical Engineering Essentials Volume 2 Advanced Processes Materials and Sustainability

2025 | book

Preface

Chemical Engineering Essentials Volume 1 Comprehensive Chemical Engineering

2025 | book

Preface

Sustainable Packaging Strengthened by Biomass Applications and Advancements

2025 | book

Preface

Transformative Role of Transformer Models in Healthcare

2025 | book

Preface

Challenges and Opportunities in the Artificial Intelligence Era

2025 | book

Preface

Smart Heat Transfer and Thermal Management Leveraging AI Machine Learning and Soft Computing

2025 | book

Processing Methods for Developing Advanced Composite Materials

Current Materials Science

2025 | journal-article

Role of fintech in revamping the banking world

Mastering Deepfake Technology Strategies for Ethical Management and Security

2025 | book-chapter

Smart Heat Transfer and Thermal Management

Smart Heat Transfer and Thermal Management Leveraging AI Machine Learning and Soft Computing

2025 | book

Solid Model Geometric Objects Detection Based on CAD Software Programming

2025 | book-chapter

Strategic Framework and Intelligent Solutions for Sustainable Cities and Communities

Strategic Framework and Intelligent Solutions for Sustainable Cities and Communities

2025 | book

Sustainable Development Goals: A Bibliometric Analysis

Journal of Sustainability Research

2025 | journal-article

Sustainable Packaging Strengthened by Biomass

Sustainable Packaging Strengthened by Biomass Applications and Advancements

2025 | book

Technopreneurship and Sustainability: Innovation, Challenges, and Opportunities

Technopreneurship and Sustainability: Innovation, Challenges, and Opportunities

2025 | book

The Key Role of Life Cycle Design Strategies in the Eco-Design of a Kitchen Island Project

Handbook of Design and Industry Scenarios for Sustainable Futures

2025 | book-chapter

Transformative Role of Transformer Models in Healthcare

Transformative Role of Transformer Models in Healthcare

2025 | book

Transforming Business Management with AI, BI, and Data-Driven Decision-Making

Transforming Business Management with AI Bi and Data Driven Decision Making

2025 | book

Vibration: A bibliometric analysis

Sound and Vibration

2025 | other

Manufacturing

International Journal of Manufacturing, Materials, and Mechanical Engineering

2024 | journal-article

3D printed hernia mesh implant: a conformability study

Exploration of BioMat-X

2024 | journal-article

Computer Simulation-Based Multi-Objective Optimisation of Additively Manufactured Cranial Implants

Technologies

2024 | journal-article

A Chip Formation Study of the Micro-Cutting of Commercially Pure Titanium

Metals

2024 | journal-article

Computer Simulation-Based Multi-objective Optimisation of Additively Manufactured Cranial Implants

2024 | preprint

Bio-materials for intramedullary pin application in canine femur: a comparative analysis

Exploration of BioMat-X

2024 | journal-article

The role of roughness parameters in grading the machined surface quality in Ti-alloys

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2024 | journal-article

A hybrid numerical and experimental approach towards Ti6Al4V alloy sustainable orthogonal turning

Journal of Cleaner Production

2024 | journal-article

ARTIFICIAL INTELLIGENCE IN PRODUCTION ENGINEERING AND MANAGEMENT

Artificial Intelligence in Production Engineering and Management

2024 | book

An Image Processing Approach for Morphology Characterization of Serration in Ti-6Al-7Nb Chip Sliding Surface

Lecture Notes in Mechanical Engineering

2024 | journal-article

Bio-dielectrics to improve the performance of electro discharge machining–an investigation for cleaner production opportunities

Advances in Materials and Processing Technologies

2024 | journal-article

Circular Economy and Manufacturing

Circular Economy and Manufacturing

2024 | book

Composite materials: A bibliometric analysis

AIMS Materials Science

2024 | journal-article

Control Of Ductile Mode Machining During Micro-Milling Of Cemented Carbide

Proceedings - Euro PM 2024 Congress and Exhibition

2024 | conference-paper

Digital image processing algorithm for industrial on-site roughness evaluation in Ti-alloy machining

Materials Research Proceedings

2024 | conference-paper

Editorial: Biomaterials: a bibliometric analysis

International Journal of Materials Engineering Innovation

2024 | journal-article

Editorial: Machining: a bibliometric analysis

International Journal of Machining and Machinability of Materials

2024 | journal-article

Engineering materials for efficient energy storage and conversion

Engineering Materials for Efficient Energy Storage and Conversion

2024 | book

Friction Stir Welding and Processing: Fundamentals to Advancements

Friction Stir Welding and Processing: Fundamentals to Advancements

2024 | book

Functional Coatings for Biomedical, Energy, and Environmental Applications

Functional Coatings for Biomedical, Energy, and Environmental Applications

2024 | book

Functional Coatings: Innovations and Challenges

Functional Coatings: Innovations and Challenges

2024 | book

Influence of machining parameters on edge quality of particleboards: modeling and optimization

International Journal of Advanced Manufacturing Technology

2024 | journal-article

Influence of machining parameters on edge quality of particleboards: modeling and optimization (Jul, 10.1007/s00170-024-14033-5, 2024)

The International Journal of Advanced Manufacturing Technology

2024 | journal-article

Innovating Sustainability Through Digital Circular Economy

Innovating Sustainability Through Digital Circular Economy

2024 | book

Introduction

Sustainability Innovation and Consumer Preference

2024 | book

Introduction

Innovating Sustainability Through Digital Circular Economy

2024 | book

Investigation into the effects of machining parameters on the edge quality of particleboards - Modelling and Optimization

Research Square

2024 | other

Investigation on micro-milling of cemented carbide with ball nose and corner radius diamond-coated end mills

The International Journal of Advanced Manufacturing Technology

2024 | journal-article

Machine Intelligence in Mechanical Engineering

Machine Intelligence in Mechanical Engineering

2024 | book

Machine intelligence in mechanical engineering: an introduction

Machine Intelligence in Mechanical Engineering

2024 | book-chapter

Machining of a functional hip prosthesis cone in TI-6AL-4V ELI titanium alloy produced by electron beam melting

Journal of the Brazilian Society of Mechanical Sciences and Engineering

2024 | journal-article

Materials and manufacturing engineering: A bibliometric analysis

Mari Papel y Corrugado

2024 | journal-article

Preface

Production, Properties, and Applications of Engineered Cementitious Composites

2024 | book

Preface

Functional Coatings for Biomedical, Energy, and Environmental Applications

2024 | book

Preface

Lecture Notes on Multidisciplinary Industrial Engineering

2024 | book

Preface

Artificial Intelligence in Production Engineering and Management

2024 | book

Preface

Circular Economy and Manufacturing

2024 | book

Preface

Friction Stir Welding and Processing: Fundamentals to Advancements

2024 | book

Preface

Functional Coatings: Innovations and Challenges

2024 | book

Preface

Machine Intelligence in Mechanical Engineering

2024 | book

Preface

Engineering Materials for Efficient Energy Storage and Conversion

2024 | book

Preface

Sustainability Innovation and Consumer Preference

2024 | book

Preface

Innovating Sustainability Through Digital Circular Economy

2024 | book

Production, properties, and applications of engineered cementitious composites

Production, Properties, and Applications of Engineered Cementitious Composites

2024 | book

Sustainability, Innovation, and Consumer Preference

Sustainability Innovation and Consumer Preference

2024 | book

Sustainable Manufacturing: An Emergence in Industry 4.0

Sustainable Manufacturing: An Emergence in Industry 4.0

2024 | book

Sustainable and Intelligent Manufacturing: Perceptions in line with 2030 Agenda of Sustainable Development

BioResources

2024 | journal-article

A case study of hybrid manufacturing of a Ti-6Al-4V titanium alloy hip prosthesis

The International Journal of Advanced Manufacturing Technology

2023 | journal-article

The Impact of Hole Diameter on the Molded and Drilled Holes in Jute-Fiber-Reinforced Epoxy Composites

Journal of Composites Science

2023 | journal-article

Applications of Nanoparticles in Various Manufacturing Processes

2023 | book-chapter

Sustainability in the Modernization of Higher Education: Curricular Transformation and Sustainable Campus—A Literature Review

Sustainability

2023 | journal-article

Digital representation of the wear behaviour of Ti-6Al-4V and Ti-6Al-7Nb biomaterial alloys: A fractal analysis of the worn surface

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

2023 | journal-article

Development of the Al12SiCuFe Alloy Foam Composites with ZrSiO4 Reinforcements at Different Foaming Temperatures

Metals

2023 | journal-article

Robot-Assisted Cold and Warm Incremental Sheet Forming of Aluminum Alloy 6061: A Comparative Study

Metals

2023 | journal-article

A Comparative Study in Forming Behavior of Different Grades of Steel in Cold Forging Backward Extrusion by Integrating Artificial Neural Network (ANN) with Differential Evolution (DE) Algorithm

Applied Sciences

2023 | journal-article

3D Finite Element Simulation of CK45 Steel Face-Milling: Chip Morphology and Tool Wear Validation

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

A Comparative Assessment on Microstructure, Mechanical and Tribological Behaviour of Light Aluminium–Trialuminide Composites

International Journal of Metalcasting

2023 | journal-article

A Comparative Study Between 2D and 3D Finite Element Methods in Machining

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

A Pedagogical Gadget for Teaching Heat Transfer

Engineering Pedagogy: A Collection of Articles in Honor of Prof. Amitabha Ghosh

2023 | book-chapter

A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites

Composites Part B: Engineering

2023 | journal-article

A review on advanced cutting tools and technologies for edge trimming of carbon fibre reinforced polymer (CFRP) composites

Composites Part B: Engineering

2023 | journal-article

Advances in MEMS and Microfluidic Systems

Advances in MEMS and Microfluidic Systems

2023 | book

Application of micro machining and additive manufacturing processes for difficult-to-cut materials in aerospace industry—a review

Modern Manufacturing Processes for Aircraft Materials

2023 | book-chapter

Applications of nanoparticles in various manufacturing processes

Sustainable Utilization of Nanoparticles and Nanofluids in Engineering Applications

2023 | book-chapter

Cellulose Composites Processing and Characterization Preface

Cellulose Composites

2023 | journal-article

Comparative study of deep drilling in the Ti-6Al-4 V ELI titanium alloy using standard and high-feed rate

The International Journal of Advanced Manufacturing Technology

2023 | journal-article

Computational Design and Digital Manufacturing Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2023 | journal-article

Corporate Governance for Climate Transition

Corporate Governance for Climate Transition

2023 | book

Development, properties, and industrial applications of 3D printed polymer composites

Development, Properties, and Industrial Applications of 3D Printed Polymer Composites

2023 | book

Experimental Study on the Effect of In/Out Radial-Finned Heat Sink with PCM under Constant and Intermittent Power Mode in Power LEDs

International Journal of Photoenergy

2023 | journal-article

Experimental and 3D Numerical Study of AA7075-T6 Drilling Process

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

FEM-Based Study of AISI52100 Steel Machining: A Combined 2D and 3D Approach

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

Fundamentals of 3D Finite Element Modeling in Conventional Machining

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

Futuristic Manufacturing: Perpetual Advancement and Research Challenges

Futuristic Manufacturing: Perpetual Advancement and Research Challenges

2023 | book

Handbook of research on advanced functional materials for orthopedic applications

Handbook of Research on Advanced Functional Materials for Orthopedic Applications

2023 | book

Higher Education for Sustainability in Portugal: A Glimpse About What Has Been Studied and Published

2023 | book-chapter

Industry 5.0: Creative and Innovative Organizations

Industry 5.0: Creative and Innovative Organizations

2023 | book

Investigation on Effect of Radial and Extended Fins in PCM Heat Sink for LED Cooling

Journal of Harbin Institute of Technology (New Series)

2023 | journal-article

MILLING PARAMETERS' INFLUENCE ON MACHINABILITY IN MILLING OF CFRP COMPOSITES FUNCTIONALIZED WITH G AND GO

Surface Review and Letters

2023 | journal-article

Morphological characterization of chip segmentation in Ti-6Al-7Nb machining: A novel method based on digital image processing

Measurement

2023 | journal-article

Nanocomposite and nanohybrid materials: Processing and applications

Nanocomposite and Nanohybrid Materials: Processing and Applications

2023 | book

Numerical Study of Different Tools in High- Speed MQL Cutting of Aluminum Alloys

Advances in Transdisciplinary Engineering

2023 | conference-paper

Parametric optimisation of milling process for the machining of carbon nanotubes-based hybrid aluminium composite

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2023 | journal-article

Polylactic acid composites: Sustainable biocomposites

Polylactic Acid Composites: Sustainable Biocomposites

2023 | book

Polymer Nanocomposites: Fabrication to Applications

Polymer Nanocomposites: Fabrication to Applications

2023 | book

Preface

Sustainable Utilization of Nanoparticles and Nanofluids in Engineering Applications

2023 | book

Preface

Industry 5.0: Creative and Innovative Organizations

2023 | book

Preface

Advances in MEMS and Microfluidic Systems

2023 | book

Preface

Advances in MEMS and Microfluidic Systems

2023 | book

Preface

Lecture Notes in Mechanical Engineering

2023 | book

Preface

Waste Residue Composites

2023 | book

Preface

Development, Properties, and Industrial Applications of 3D Printed Polymer Composites

2023 | book

Preface

Futuristic Manufacturing: Perpetual Advancement and Research Challenges

2023 | book

Preface

Lecture Notes in Mechanical Engineering

2023 | book

Preface

Handbook of Research on Advanced Functional Materials for Orthopedic Applications

2023 | book

Preface

Corporate Governance for Climate Transition

2023 | book

Preface

Lecture Notes in Mechanical Engineering

2023 | book

Preface

Lecture Notes in Mechanical Engineering

2023 | book

Preface

Advances in Transdisciplinary Engineering

2023 | conference-paper

Recent Advances in the Manufacturing of Polymeric Composites

Advances in Materials Science and Engineering

2023 | journal-article

Some Studies on Measurement of Worn Surface by Digital Image Processing

International Journal of Image and Graphics

2023 | journal-article

Statistical learning and optimization of the helical milling of the biocompatible titanium Ti-6Al-7Nb alloy

International Journal of Advanced Manufacturing Technology

2023 | journal-article

Sustainable Materials and Manufacturing Technologies

Sustainable Materials and Manufacturing Technologies

2023 | book

Sustainable utilization of nanoparticles and nanofluids in engineering applications

Sustainable Utilization of Nanoparticles and Nanofluids in Engineering Applications

2023 | book

The Impact of Hole Diameter on the Moulded and Drilled Holes in Jute Fibre Reinforced Epoxy Composites

Preprints.org

2023 | journal-article

Tribology in Sustainable Manufacturing

Tribology in Sustainable Manufacturing

2023 | book

Using Harris Hawk algorithm for experimental study on the hole dilation mechanism during Micro-machining (μM) of Graphene nanoplatelets/Carbon fiber (GnP/C) reinforced polymeric composite

Materials Research Express

2023 | journal-article

Waste residue composites

Waste Residue Composites

2023 | book

Advancements in the Additive Manufacturing of Magnesium and Aluminum Alloys through Laser-Based Approach

Materials

2022 | journal-article

Natural Computing-Based Designing of Hybrid UHMWPE Composites for Orthopedic Implants

Applied Sciences

2022 | journal-article

Effect of Titanium Based Alloys on Thermo-Mechanical Behavior in 3D Forging Simulation

Metals

2022 | journal-article

Multi-Response Optimization during the High-Speed Drilling of Composite Laminate Using the Grey Entropy Fuzzy Method (GEF)

Processes

2022 | journal-article

Effect of Thermo-Physical Properties of the Tool Materials on the Electro-Discharge Machining Performance of Ti-6Al-4V and SS316 Work Piece Materials

Journal of Manufacturing and Materials Processing

2022 | journal-article

Understanding the Mechanism of Abrasive-Based Finishing Processes Using Mathematical Modeling and Numerical Simulation

Metals

2022 | journal-article

Characterization of Microstructure and High Temperature Compressive Strength of Austenitic Stainless Steel (21-4N) through Powder Metallurgy Route

Crystals

2022 | journal-article

Tribological Performance and Rheological Properties of Engine Oil with Graphene Nano-Additives

Lubricants

2022 | journal-article

Higher Education for Sustainability: A Bibliometric Approach—What, Where and Who Is Doing Research in This Subject?

Sustainability

2022 | journal-article

Tool Wear Rate and Surface Integrity Studies in Wire Electric Discharge Machining of NiTiNOL Shape Memory Alloy Using Diffusion Annealed Coated Electrode Materials

Machines

2022 | journal-article

Energy Conversion Strategies for Wind Energy System: Electrical, Mechanical and Material Aspects

Materials

2022 | journal-article

On the Machining Temperature and Hole Quality of CFRP Laminates when Using Diamond-Coated Special Drills

Journal of Composites Science

2022 | journal-article

Design and Structural Simulations of a Custom Li-Po Accumulator for Low Range, Lightweight, Single-Seater, Open Cockpit, and Open-Wheeled Racecar

Energies

2022 | journal-article

A critical review addressing drilling-induced damage of CFRP composites

Composite Structures

2022 | journal-article

Advances in Metal Additive Manufacturing

Advances in Metal Additive Manufacturing

2022 | book

An experimental investigation on milling features of fully-sintered zirconia ceramics using PCD tools

Materials and Manufacturing Processes

2022 | journal-article

Comparative study of titanium alloys machinability used for medical applications

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2022 | journal-article

Development of FEM-based digital twins for machining difficult-to-cut materials: A roadmap for sustainability

Journal of Manufacturing Processes

2022 | journal-article

Effect of organoclays on mechanical properties of glass fiber-reinforced epoxy nanocomposite

Polymer Bulletin

2022 | journal-article

Experimental study of drilling behaviors and damage issues for woven GFRP composites using special drills

Journal of Materials Research and Technology

2022 | journal-article

Green Production Engineering and Management

Green Production Engineering and Management

2022 | book

Higher Education for Sustainable Development Goals

Higher Education for Sustainable Development Goals

2022 | book

Higher Education: Progress for Management and Engineering

Higher Education: Progress for Management and Engineering

2022 | book

Industrial tribology: Sustainable machinery and industry 4.0

Industrial Tribology: Sustainable Machinery and Industry 4.0

2022 | book

Innovation and Sustainable Manufacturing: Research and Development

Innovation and Sustainable Manufacturing: Research and Development

2022 | book

Machine Learning Applications for The Tensile Property Evaluation of Steel: An Overview

Handbook of Smart Materials, Technologies, and Devices: Applications of Industry 4.0: Volume 1-3

2022 | book-chapter

Machining Effects of Fibrous Composites and Related Stacks for Aerospace Applications

Advanced Composites in Aerospace Engineering Applications

2022 | book-chapter

Machining of titanium alloys for medical application - a review

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2022 | journal-article

Nonconventional Machining

Nonconventional Machining

2022 | book

Numerical study of interface damage formation mechanisms in machining CFRP/Ti6Al4V stacks under different cutting sequence strategies

Composite Structures

2022 | journal-article

Organizational Innovation in the Digital Age

Organizational Innovation in the Digital Age

2022 | book

Practice of artificial intelligence in welding and additive manufacturing

Advances in Sustainable Manufacturing - A Catalyst for Processes and Systems for Next Generation Manufacturing

2022 | book-chapter

Prediction of tensile strength in squeeze casted hybrid aluminium matrix composites using conventional statistical approach

Advances in Materials and Processing Technologies

2022 | journal-article

Preface

Higher Education: Progress for Management and Engineering

2022 | book

Preface

Green Production Engineering and Management

2022 | book

Preface

Nonconventional Machining

2022 | book

Preface

Higher Education for Sustainable Development Goals

2022 | book

Preface

Organizational Innovation in the Digital Age

2022 | book

Preface

Innovation and Sustainable Manufacturing: Research and Development

2022 | book

Preface

Advances in Metal Additive Manufacturing

2022 | book

Principles of Entrepreneurship in the Industry 4.0 Era

Principles of Entrepreneurship in the Industry 4.0 Era

2022 | book

SWOT analysis of Industry 4.0 variables using AHP methodology and structural equation modelling

Benchmarking

2022 | journal-article

Synthesis and characterization of flyash reinforced polymer composites developed by Fused Filament Fabrication

Journal of Materials Research and Technology

2022 | journal-article

The Combined Effect of Banana Fiber and Fly Ash Reinforcements on the Mechanical Behavior of Polyester Composites

Journal of Natural Fibers

2022 | journal-article

Tribological Performance Optimization of Mg-WC Nanocomposites in Dry Sliding: A Statistical Approach

Frontiers in Materials

2022 | journal-article

High-Temperature Corrosion Performance of FeAl-Based Alloys Containing Carbon in Molten Salt

Metals

2021 | journal-article

A Study of the Effect of Conventional Drilling and Helical Milling in Surface Quality in Titanium Ti-6Al-4V and Ti-6AL-7Nb Alloys for Medical Applications

Arabian Journal for Science and Engineering

2021 | journal-article

A novel methodology for simultaneous minimization of manufacturing objectives in tolerance allocation of complex assembly

Applied Sciences (Switzerland)

2021 | journal-article

A review on micro-milling: recent advances and future trends

International Journal of Advanced Manufacturing Technology

2021 | journal-article

A semi-analytical model for predicting tool wear progression in drilling CFRP

Wear

2021 | journal-article

Additive Manufacturing: A Tool for Industrial Revolution 4.0

Additive Manufacturing A Tool for Industrial Revolution 4 0

2021 | book

Additive Manufacturing: A volume in Handbooks in Advanced Manufacturing

Additive Manufacturing

2021 | book

Advanced Materials and Manufacturing Processes

Advanced Materials and Manufacturing Processes

2021 | book

Advanced Welding and Deforming

Advanced Welding and Deforming

2021 | book

Advanced materials and multi-materials applied in aeronautical and automotive fields: A systematic review approach

Procedia CIRP

2021 | conference-paper

Analysis and Optimization of Truss Structures, Constrained Handling using Genetic Algorithm

Journal of Applied and Computational Mechanics

2021 | journal-article

Comparison between the machinability of different titanium alloys (Ti–6Al–4V and Ti–6Al–7Nb) employing the multi-objective optimization

Journal of the Brazilian Society of Mechanical Sciences and Engineering

2021 | journal-article

Current tools and methodology for a sustainable product life cycle and design

Sustainable Manufacturing and Design

2021 | book-chapter

Evaluation of desirability function approach and grey relation analysis for modeling circularity, perpendicularity and cylindricity in drilling magnesium AZ31

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2021 | journal-article

Experimental and Numerical Investigations in Mechanical Machining of Fibre-Reinforced Composite Materials

Advances in Materials Science and Engineering

2021 | journal-article

Foreword

Advanced Machining and Finishing

2021 | book

Harmony search algorithm for minimizing assembly variation in non-linear assembly

Applied Sciences (Switzerland)

2021 | journal-article

Intelligent machining methods for Ti6Al4V: A review

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2021 | journal-article

Introduction

Engineering Materials

2021 | book-chapter

Joining processes for dissimilar and advanced materials

Joining Processes for Dissimilar and Advanced Materials

2021 | book

Knowledge Management and Learning Organizations

Knowledge Management and Learning Organizations

2021 | book

Light Weight Materials: Processing and Characterization

Light Weight Materials: Processing and Characterization

2021 | book

Machining of Ebm Ti-6AL-4V Titanium Alloy Functional Femoral Cone

ResearchSquare

2021 | other

Machining of Ebm Ti-6AL-4V Titanium Alloy Functional Femoral Cone

Research Square

2021 | other

Machining responses of high-strength carbon/epoxy composites using diamond-coated brad spur drills

Materials and Manufacturing Processes

2021 | journal-article

Material model assessment in Ti6Al4V machining simulations with FEM

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

2021 | journal-article

Mechanism of surface generation in grinding aa6061-tib2/zrb2 in-situ composite

Journal of Computational and Applied Research in Mechanical Engineering

2021 | journal-article

On Nanographene-Reinforced Polyvinylidene Fluoride Composite Matrix for 4D Applications

Journal of Materials Engineering and Performance

2021 | journal-article

On the effects of bio-based nanolubricants formulation for the turning of Inconel 718

Journal of the Brazilian Society of Mechanical Sciences and Engineering

2021 | journal-article

Optimization of process parameters for turning hastelloy x under different machining environments using evolutionary algorithms: A comparative study

Applied Sciences (Switzerland)

2021 | journal-article

Preface

Lecture Notes in Mechanical Engineering

2021 | book

Preface

Sustainable Manufacturing and Design

2021 | book

Preface

Advanced Materials and Manufacturing Processes

2021 | book

Preface

Advanced Welding and Deforming

2021 | book

Preface

Springer Proceedings in Materials

2021 | book

Preface

Knowledge Management and Learning Organizations

2021 | book

Preface

Light Weight Materials: Processing and Characterization

2021 | book

Preface

Additive Manufacturing: A Tool for Industrial Revolution 4.0

2021 | book

Relevance of micromachining in microfluidics and biomedical devices

Advanced Machining and Finishing

2021 | book-chapter

Series Foreword

Sustainable Manufacturing

2021 | book

Series Foreword

Advanced Welding and Deforming

2021 | book

Structural and Mechanical Analysis of APCVD Deposited Diamond-Like Carbon Thin Films

Silicon

2021 | journal-article

Surface topography in machining Ti alloys for biomedical applications: correlative microscopy approach for qualitative and quantitative analysis

International Journal of Advanced Manufacturing Technology

2021 | journal-article

Sustainable Manufacturing and Design

Sustainable Manufacturing and Design

2021 | book

Toolpath and machining parameters optimisation of the cavities of a knee prosthesis tibial insert

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2021 | journal-article

Tribological characterisation of magnesium matrix nanocomposites: A review

Advances in Mechanical Engineering

2021 | journal-article

Wear behavior of special tools in the drilling of CFRP composite laminates

Wear

2021 | journal-article

Additive and subtractive manufacturing: Emergent technologies

Additive and Subtractive Manufacturing: Emergent Technologies

2020 | book

Additive manufacturing for patient-specific medical use

Additive and Subtractive Manufacturing: Emergent Technologies

2020 | book-chapter

Additive manufacturing for patient-specific medical use

Drilling Technology: Fundamentals and Recent Advances

2020 | journal-article

Advanced Features in Sheet Metal

2020 | book-chapter

Analysis of forming behavior in cold forging of aisi 1010 steel using artificial neural network

Metals

2020 | journal-article

Assembly

2020 | book-chapter

Assembly Continued

2020 | book-chapter

Basic Sketch Relations and Dimensioning

2020 | book-chapter

Basics of Drawing

2020 | book-chapter

Classification of Factors Associated with a Closed-Loop Supply Chain System, Their Modelling Methods and Strategies

2020 | book-chapter

Cloud-based optimization in manufacturing digital industries

Manufacturing in Digital Industries: Prospects for Industry 4.0

2020 | book-chapter

Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills

Composite Structures

2020 | journal-article

Correlative microscopy analysis of surface topography in machining Ti-6Al-7Nb

Procedia CIRP

2020 | conference-paper

Digital tribology and the industry 4.0 a note

Manufacturing in Digital Industries: Prospects for Industry 4.0

2020 | book-chapter

Drilling characteristics of carbon/epoxy and carbon/polyimide composites

Materials and Manufacturing Processes

2020 | journal-article

Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations

Procedia Manufacturing

2020 | conference-paper

Features Including Cuts

2020 | book-chapter

Geometric optimization of drills used to repair holes in magnesium aeronautical components

Metals

2020 | journal-article

High speed machining

High-Speed Machining

2020 | book

High speed machining of composite materials

High-Speed Machining

2020 | book-chapter

Introduction

2020 | book-chapter

Introduction to Sheet Metal

2020 | book-chapter

Introduction to Sketching

2020 | book-chapter

Machinability analysis and optimization in wire EDM of medical grade NiTiNOL memory alloy

Materials

2020 | journal-article

Manufacturing in digital industries: Prospects for industry 4.0

Manufacturing in Digital Industries: Prospects for Industry 4.0

2020 | book

Mastering SolidWorks

2020 | book

Medical devices biomaterials – A review

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

2020 | journal-article

Modern Manufacturing Processes

Modern Manufacturing Processes

2020 | book

Multivariate GR&R through factor analysis

Measurement Journal of the International Measurement Confederation

2020 | journal-article

On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies

Composite Structures

2020 | journal-article

On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites

Polymer Composites

2020 | journal-article

Optimization Using Evolutionary Algorithms and Metaheuristics Applications in Engineering Preface

Optimization Using Evolutionary Algorithms and Metaheuristics: Applications in Engineering

2020 | journal-article

Part Modeling Using Features

2020 | book-chapter

Perspective on the mechanical response of pineapple leaf filler/toughened epoxy composites under diverse constraints

Polymer Bulletin

2020 | journal-article

Prediction of thrust force and cutting torque in drilling of AL 6082-T6 by using the RSM methodology

Journal of Manufacturing Technology Research

2020 | journal-article

Preface

Sustainable Management for Managers and Engineers

2020 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2020 | book

Preface

High-Speed Machining

2020 | book

Preface

Lecture Notes in Mechanical Engineering

2020 | book

Preface

Additive and Subtractive Manufacturing: Emergent Technologies

2020 | book

Preface

Modern Manufacturing Processes

2020 | book

Preface

Lecture Notes in Mechanical Engineering

2020 | book

Preface

High-Speed Machining

2020 | book

Preface

Drilling Technology: Fundamentals and Recent Advances

2020 | journal-article

Rapid prototyping, rapid tooling and reverse engineering: From biological models to 3d bioprinters

Rapid Prototyping, Rapid Tooling and Reverse Engineering: From Biological Models to 3D Bioprinters

2020 | book

Repairing hybrid Mg-Al-Mg components using sustainable cooling systems

Materials

2020 | journal-article

Sketch Entities

2020 | book-chapter

Sustainability Manufacturing Systems Design

Encyclopedia of Renewable and Sustainable Materials: Volume 1-5

2020 | book-chapter

Sustainable Management for Managers and Engineers

Sustainable Management for Managers and Engineers

2020 | book

Thin Features

2020 | book-chapter

To Create a Flanged Coupling

2020 | book-chapter

To Create a Foot Step Bearing

2020 | book-chapter

Tribological characterization of particulate-reinforced aluminum metal matrix nanocomposites: A review

Advanced Composites Letters

2020 | journal-article

Wear resistance performance of die casting materials: A review

Journal of Manufacturing Technology Research

2020 | journal-article

3-D reconstruction by extended depth-of-field in tribological analysis: Fractal approach of sliding surface in Polyamide66 with glass fiber reinforcement

Polymer Testing

2019 | journal-article

ADVANCED APPLICATIONS IN MANUFACTURING ENGINEERING PREFACE

Advanced Applications in Manufacturing Engineering

2019 | journal-article

Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review

Composites Part A: Applied Science and Manufacturing

2019 | journal-article

An assessment of thermosetting infiltrate in powder-based composites made by additive manufacturing

Journal of Composite Materials

2019 | journal-article

An insight into plant-based biodegradable composites

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | book-chapter

An insight into plant-based biodegradable composites

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | journal-article

Analysis of process parameters on centerless grinding by using response surface methodology

Journal of Manufacturing Technology Research

2019 | journal-article

Analysis of secondary adhesion wear mechanism on hard machining of titanium aerospace alloy

Materials

2019 | journal-article

Biodegradable Composites Materials, Manufacturing and Engineering Preface

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | journal-article

Biodegradable Composites: Materials, Manufacturing and Engineering

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | book

Casting

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Computational Methods for Application in Industry 4.0

COMPUTATIONAL METHODS FOR APPLICATION IN INDUSTRY 4.0

2019 | journal-article

Computational Methods for Application in Industry 4.0 Preface

COMPUTATIONAL METHODS FOR APPLICATION IN INDUSTRY 4.0

2019 | journal-article

Digital manufacturing and assembly systems in industry 4.0

Digital Manufacturing and Assembly Systems in Industry 4.0

2019 | book

Editorial

International Journal of Manufacturing Technology and Management

2019 | journal-article

Editorial

International Journal of Materials Engineering Innovation

2019 | journal-article

Emotional intelligence and neuro-linguistic programming: New insights for managers and engineers

Emotional Intelligence and Neuro-Linguistic Programming: New Insights for Managers and Engineers

2019 | book

Engineering education for sustainability

Engineering Education for Sustainability

2019 | book

Enhancing Productivity by Means of High Feed Rate in the Drilling of Al 2011 Aluminium Alloy

Arabian Journal for Science and Engineering

2019 | journal-article

Evolutionary-based methods

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Fabrication and tribological study of AA6061 hybrid metal matrix composites reinforced with SiC/B4C nanoparticles

Industrial Lubrication and Tribology

2019 | journal-article

Fe analysis of roller forces and diametral growth in backward metal flow forming process

Journal of Manufacturing Technology Research

2019 | journal-article

Feasibility study of hole repair and maintenance operations by dry drilling of magnesium alloy UNS M11917 for aeronautical components

Metals

2019 | journal-article

Fire performance of natural fiber reinforced polymeric composites

Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment

2019 | book-chapter

Forming

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Fuzzy Logic for Machining Applications: Review

Soft Computing Techniques and Applications in Mechanical Engineering

2019 | journal-article

General aspects of the application of computational methods in industry 4.0

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Handbook of Research on Green Engineering Techniques for Modern Manufacturing

Soft Computing Techniques and Applications in Mechanical Engineering

2019 | journal-article

Influence of the gas pressure of plasma nitriding on the structural, mechanical and tribological surface properties of AISI 316L

Materials Research

2019 | journal-article

Intelligent Manufacturing

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Introduction to Materials

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions

Procedia Manufacturing

2019 | conference-paper

Machining Process

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Machining of a biomaterial with dual negative tool geometry

Mechanical Behaviour of Biomaterials

2019 | book-chapter

Machining of a biomaterial with dual negative tool geometry

Self-assembling Biomaterials: Molecular Design, Characterization and Application in Biology and Medicine

2019 | journal-article

Manufacturing systems: Their simulation modelling methods and other intelligent systems

Journal of Manufacturing Technology Research

2019 | journal-article

Materials and Manufacturing Processes

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Materials and Manufacturing Processes Preface

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Measurement and optimization of multi-response characteristics in plasma arc cutting of Monel 400™ using RSM and TOPSIS

Measurement: Journal of the International Measurement Confederation

2019 | journal-article

Mechanical Behavior of Biomaterials Preface

Self-assembling Biomaterials: Molecular Design, Characterization and Application in Biology and Medicine

2019 | journal-article

Mechanical Behavior of Epoxy-Based Green Composites

Materials Horizons: From Nature to Nanomaterials

2019 | book-chapter

Mechanical Behaviour of Materials

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Mechanical behaviour of biomaterials

Mechanical Behaviour of Biomaterials

2019 | book

Metallic biomaterials-A review

Self-assembling Biomaterials: Molecular Design, Characterization and Application in Biology and Medicine

2019 | journal-article

Micro and Nano Machining of Engineering Materials Recent Developments Preface

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Modeling and optimization of Wire-EDM parameters for machining of Ni55.8Ti shape memory alloy using hybrid approach of Taguchi and NSGA-II

International Journal of Advanced Manufacturing Technology

2019 | journal-article

Modeling and optimization of fractal dimension in wire electrical discharge machining of EN 31 steel using the ANN-GA approach

Materials

2019 | journal-article

Multi-objective robust design of helical milling hole quality on AISI H13 hardened steel by normalized normal constraint coupled with robust parameter design

Applied Soft Computing Journal

2019 | journal-article

Multi-response optimization of process parameters in AWJ machining of hybrid GFRP composite by grey relational method

Procedia Manufacturing

2019 | conference-paper

On wire spark erosion machining induced surface integrity of Ni 55.8 Ti shape memory alloys

Archives of Civil and Mechanical Engineering

2019 | journal-article

Optimization and effect of squeeze casting process parameters on tensile strength of hybrid metal matrix composite

Journal of Manufacturing Technology Research

2019 | journal-article

Optimization for engineering problems

Optimization for Engineering Problems

2019 | book

Optimizing production in machining of hardened steels using response surface methodology

Acta Scientiarum - Technology

2019 | journal-article

Other computational methods for optimization

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Performance Study of LaPO4-Y2O3 Composite Fabricated by Sol-Gel Process Using Abrasive Waterjet Machining

Soft Computing Techniques and Applications in Mechanical Engineering

2019 | journal-article

Performance studies on wire electric discharge machining of medical grade nickel titanium (NiTi) shape memory alloy

Journal of Manufacturing Technology Research

2019 | journal-article

Preface

SpringerBriefs in Applied Sciences and Technology

2019 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2019 | book

Preface

Optimization for Engineering Problems

2019 | book

Preface

Mechanical Behaviour of Biomaterials

2019 | book

Preface

Sustainable Engineering Products and Manufacturing Technologies

2019 | book

Preface

Engineering Education for Sustainability

2019 | book

Preface

Emotional Intelligence and Neuro-Linguistic Programming: New Insights for Managers and Engineers

2019 | book

Preface

Digital Manufacturing and Assembly Systems in Industry 4.0

2019 | book

Preface

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | book

Preface

Mechanical Behavior of Biomaterials

2019 | book

Preface

Lecture Notes on Multidisciplinary Industrial Engineering

2019 | book

Preface

Lecture Notes on Multidisciplinary Industrial Engineering

2019 | book

Process Planning in Era 4.0

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Requirements of Education and Qualification

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Risk Management Implementation

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Socio-technical Considerations

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Special Issue on: 3D Printing and Additive Manufacturing

International Journal of Materials and Product Technology

2019 | journal-article

Special Issue on: Developments in Additive Manufacturing

International Journal of Materials and Product Technology

2019 | journal-article

Special issue on applied mathematical techniques in engineering applications and related topics-I

Nonlinear Studies

2019 | journal-article

Special issue on applied mathematical techniques in engineering applications and related topics-II

Nonlinear Studies

2019 | journal-article

Sustainable Business Scenarios in 4.0 Era

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Sustainable engineering products and manufacturing technologies

Sustainable Engineering Products and Manufacturing Technologies

2019 | book

Swarm intelligence-based methods

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Tool wear in dry helical milling for hole-making in AISI H13 hardened steel

International Journal of Advanced Manufacturing Technology

2019 | journal-article

Tribological behavior of pa66+mos2 and pa66gf30 under water lubrication

Journal of Manufacturing Technology Research

2019 | journal-article

Tribological characteristics of electroless NI-B-W-MO coatings under dry sliding condition

Journal of Manufacturing Technology Research

2019 | journal-article

Tribology of materials for biomedical applications

Mechanical Behaviour of Biomaterials

2019 | book-chapter

Tribology of materials for biomedical applications

Self-assembling Biomaterials: Molecular Design, Characterization and Application in Biology and Medicine

2019 | journal-article

Welding

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

3D progressive damage based macro‑Mechanical FE simulation of machining unidirectional FRP composite

Chinese Journal of Mechanical Engineering (English Edition)

2018 | journal-article

A review on dry sliding wear behaviour of metal matrix composites

Wear of Composite Materials

2018 | book-chapter

Advanced applications in manufacturing enginering

Advanced Applications in Manufacturing Engineering

2018 | book

Advanced mathematical techniques in science and engineering

Advanced Mathematical Techniques in Science and Engineering

2018 | book

Advances in Measurement Science and Technology

International Journal of Materials and Product Technology

2018 | journal-article

Analysis and optimization of hole quality parameters in cenosphere-multiwall carbon nanotube hybrid composites drilling using artificial neural network and gravitational search technique

Drilling Technology: Fundamentals and Recent Advances

2018 | journal-article

Application of heuristic optimization towards optimal process parametersin advanced machining process

Journal of Manufacturing Technology Research

2018 | journal-article

Behaviour of a biocompatible titanium alloy during orthogonal micro-cutting employing green machining techniques

International Journal of Advanced Manufacturing Technology

2018 | journal-article

Comparative study of tribological behavior of electroless Ni-B, Ni-B-Mo, and Ni-B-W coatings at room and high temperatures

Lubricants

2018 | journal-article

Composites and Advanced Materials for Industrial Applications Preface

Sustainable Nanosystems Development, Properties, and Applications

2018 | journal-article

Composites and advanced materials for industrial applications

Composites and Advanced Materials for Industrial Applications

2018 | book

Corporate Social Responsibility in Management and Engineering Preface

Corporate Social Responsibility in Management and Engineering

2018 | journal-article

Corporate social responsibility in management and engineering

Corporate Social Responsibility in Management and Engineering

2018 | book

Design and Optimization of Mechanical Engineering Products Preface

Soft Computing Techniques and Applications in Mechanical Engineering

2018 | journal-article

Design and optimization of mechanical engineering products

Design and Optimization of Mechanical Engineering Products

2018 | book

Development of a comprehensive delamination assessment factor and its evaluation with high-speed drilling of composite laminates using a twist drill

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2018 | journal-article

Drilling Technology Fundamentals and Recent Advances Preface

Drilling Technology: Fundamentals and Recent Advances

2018 | journal-article

Drilling of composite materials: methods and tools

Drilling Technology: Fundamentals and Recent Advances

2018 | journal-article

Editorial

International Journal of Materials and Product Technology

2018 | journal-article

Editorial

International Journal of Surface Science and Engineering

2018 | journal-article

Effect of glass fiber reinforcement and the addition of MoS2 on the tribological behavior of PA66 under dry sliding conditions: A study of distribution of pixel intensity on the counterface

Wear of Composite Materials

2018 | book-chapter

Elevator System Analysis in Deliberation of Dependability, Cost Under Coverage, and Copula Approaches

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2018 | journal-article

Experimental investigation and optimization of PAC parameters on Monel 400™ superalloy

Materials and Manufacturing Processes

2018 | journal-article

Fabrication of functionally graded materials: A review

Hierarchical Composite Materials: Materials, Manufacturing, Engineering

2018 | book-chapter

Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness,tool wear,chip morphology and economic analysis

Journal of Manufacturing Technology Research

2018 | journal-article

Heat treatment effects on tribological characteristics for AISI A8 tool steel and development of wear mechanism maps using K means clustering and neural networks

Tribology - Materials, Surfaces and Interfaces

2018 | journal-article

Hierarchical Composite Materials: Materials, Manufacturing, Engineering

Hierarchical Composite Materials: Materials, Manufacturing, Engineering

2018 | book

History of Production and Industrial Engineering Through Contributions of Stalwarts

Manufacturing Engineering Education

2018 | book-chapter

Identification of Optimal Process Parameters in Electro-Discharge Machining Using ANN and PSO

Soft Computing Techniques and Applications in Mechanical Engineering

2018 | journal-article

Influence of cutting parameters on temperature in high speed drilling of GFRP composites

Journal of Manufacturing Technology Research

2018 | journal-article

Influence of sliding velocity on the tribological behavior of PA66GF30 and PA66 + MoS2: an analysis of morphology of sliding surface by digital image processing

Polymer Bulletin

2018 | journal-article

Investigation of margin effect to minimize delamination during drilling of differently stacked gfrp-aluminum fiber metal laminates (3/2 glare)

Journal of Manufacturing Technology Research

2018 | journal-article

Manufacturing Engineering Education

Manufacturing Engineering Education

2018 | book

Mechanical deburring and edge-finishing processes for aluminum parts—a review

International Journal of Advanced Manufacturing Technology

2018 | journal-article

Mechanical properties of bio compatible functional prototypes for joining applications in clinical dentistry

International Journal of Production Research

2018 | journal-article

Micro MBA: Theory and Practice

Micro MBA: Theory and Practice

2018 | book

Micro tool design and fabrication: A review

Journal of Manufacturing Processes

2018 | journal-article

Modeling and Simulation in Industrial Engineering Preface

Modeling and Simulation in Industrial Engineering

2018 | journal-article

Multivariate robust modeling and optimization of cutting forces of the helical milling process of the aluminum alloy Al 7075

International Journal of Advanced Manufacturing Technology

2018 | journal-article

Organizational Behaviour and Human Resource Management A Guide to a Specialized MBA Course Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2018 | journal-article

Preface

Design and Optimization of Mechanical Engineering Products

2018 | book

Preface

Wear of Composite Materials

2018 | book

Preface

Corporate Social Responsibility in Management and Engineering

2018 | book

Preface

Advanced Mathematical Techniques in Science and Engineering

2018 | book

Preface

Wear of Composite Materials

2018 | book

Preface

Design and Optimization of Mechanical Engineering Products

2018 | book

Preface

Manufacturing Engineering Education

2018 | book

Preface

Wear of Composite Materials

2018 | book

Preface

Manufacturing Engineering Education

2018 | book

Preface

Advanced Applications in Manufacturing Engineering

2018 | book

Preface

Wear of Composite Materials

2018 | book

Preface

Micro MBA: Theory and Practice

2018 | book

Preface

Advanced Applications in Manufacturing Engineering

2018 | book

Preface

Hierarchical Composite Materials: Materials, Manufacturing, Engineering

2018 | book

Progress in Lean Manufacturing Preface

Progress in Lean Manufacturing

2018 | journal-article

Soft Computing Techniques and Applications in Mechanical Engineering

Soft Computing Techniques and Applications in Mechanical Engineering

2018 | journal-article

Wear of composite materials

Wear of Composite Materials

2018 | book

A REVIEW ON EFFECTS OF CRYOGENIC TREATMENT OF AISI 'D' SERIES COLD WORKING TOOL STEELS

Reviews on Advanced Materials Science

2017 | journal-article

A review of helical milling process

International Journal of Machine Tools and Manufacture

2017 | journal-article

A review on effects of cryogenic treatment of AISI 'D' series cold working tool steels

Reviews on Advanced Materials Science

2017 | journal-article

Advanced machining processes: Innovative modeling techniques

Advanced Machining Processes: Innovative Modeling Techniques

2017 | book

Advances in Reliability and System Engineering Preface

Advances in Reliability and System Engineering

2017 | journal-article

Analysis and optimization of dry sliding wear parameters in cenosphere/epoxy composites

Journal of Manufacturing Technology Research

2017 | journal-article

Carbon fiber reinforced metal matrix composites: Fabrication processes and properties

Composites Part A: Applied Science and Manufacturing

2017 | journal-article

Computational Methods and Production Engineering Research and Development Preface

Computational Methods and Production Engineering: Research and Development

2017 | journal-article

Computational methods and production engineering: Research and development

Computational Methods and Production Engineering: Research and Development

2017 | book

Curricula for Sustainability in Higher Education Preface

Curricula for Sustainability in Higher Education

2017 | journal-article

Effect of geometry of tool pin profile on the mechanical and metallographic characteristics of friction stir welded AA 5052-H32 aluminium alloy

Journal of Manufacturing Technology Research

2017 | journal-article

Green and Lean Management Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2017 | journal-article

Higher Education Institutions in a Global Warming World The Transition of Higher Education Institutions to a Low Carbon Economy Preface

Higher Education Institutions in a Global Warming World: the Transition of Higher Education Institutions to a Low Carbon Economy

2017 | journal-article

Higher education institutions in a global warming world: The transition of higher education institutions to a low carbon economy

Higher Education Institutions in a Global Warming World: The Transition of Higher Education Institutions to a Low Carbon Economy

2017 | book

Initial shear strain development during formation of nanostructuredmetal chips (Retraction of Vol 24, 10.1179/174328407X243014, 2008)

Materials Science and Technology

2017 | journal-article

Laser Assisted Bending by Magnetic Force

Journal of Engineering-Joe

2017 | journal-article

Latest advances in the micro-milling of titanium alloys: a review

Procedia Manufacturing

2017 | conference-paper

Managing organizational diversity: Trends and challenges in management and engineering

Managing Organizational Diversity: Trends and Challenges in Management and Engineering

2017 | book

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics Preface

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2017 | journal-article

Mathematics Applied to Engineering Preface

Mathematics Applied to Engineering

2017 | journal-article

Mathematics applied to engineering

Mathematics Applied to Engineering

2017 | book

Microfabrication and Precision Engineering Research and Development Preface

MICROFABRICATION AND PRECISION ENGINEERING: RESEARCH AND DEVELOPMENT

2017 | journal-article

Microstructure and wear characterization of rice husk ash reinforced copper matrix composites prepared using friction stir processing

Journal of Alloys and Compounds

2017 | journal-article

Multi-objective robust optimization of the sustainable helical milling process of the aluminum alloy Al 7075 using the augmented-enhanced normalized normal constraint method

Journal of Cleaner Production

2017 | journal-article

Multiresponse optimization in wire electric discharge machining (WEDM) of HCHCr steel by integrating response surface methodology (RSM) with differential evolution (DE)

Computational Methods and Production Engineering: Research and Development

2017 | book-chapter

Multiresponse optimization in wire electric discharge machining (WEDM) of HCHCr steel by integrating response surface methodology (RSM) with differential evolution (DE)

Computational Methods and Production Engineering: Research and Development

2017 | journal-article

Non-traditional Micromachining Processes Fundamentals and Applications Preface

Micro and Nano Machining of Engineering Materials: Recent Developments

2017 | journal-article

Optimization of Process Parameters Using Soft Computing Techniques: A Case With Wire Electrical Discharge Machining

Handbook of Research on Soft Computing and Nature-inspired Algorithms

2017 | journal-article

Optimization of Process Parameters Using Taguchi Coupled Genetic Algorithm: Machining in CNC Lathe

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2017 | journal-article

Optimization of process parameters using soft computing techniques: A case with wire electrical discharge machining

Handbook of Research on Soft Computing and Nature-Inspired Algorithms

2017 | book-chapter

Preface

Managing Organizational Diversity: Trends and Challenges in Management and Engineering

2017 | book

Preface

Productivity and Organizational Management

2017 | book

Preface

Mathematics Applied to Engineering

2017 | book

Preface

Computational Methods and Production Engineering: Research and Development

2017 | book

Preface

Advanced Machining Processes: Innovative Modeling Techniques

2017 | book

Preface

Managing Organizational Diversity: Trends and Challenges in Management and Engineering

2017 | book

Preface

Advanced Machining Processes: Innovative Modeling Techniques

2017 | book

Preface

Higher Education Institutions in a Global Warming World: The Transition of Higher Education Institutions to a Low Carbon Economy

2017 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2017 | book

Preface

Mathematics Applied to Engineering

2017 | book

Preface

Mathematics Applied to Engineering

2017 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2017 | book

Preface

Journal of Manufacturing Technology Research

2017 | journal-article

Preparation and wear characterization of gfrp filled with granite particle laminate composites

Journal of Manufacturing Technology Research

2017 | journal-article

Productivity and organizational management

Productivity and Organizational Management

2017 | book

Robust weighting applied to optimization of AISI H13 hardened-steel turning process with ceramic wiper tool: A diversity-based approach

Precision Engineering

2017 | journal-article

Study Based on Sound Monitoring as a Means for Superficial Quality Control in Intermittent Turning of Magnesium Workpieces

Procedia CIRP

2017 | conference-paper

Surface Finish Coatings

Comprehensive Materials Finishing

2017 | book-chapter

Sustainable Machining Preface

Sustainable Machining

2017 | journal-article

2D macro-mechanical FE simulations for machining unidirectional FRP composite: The influence of damage models

Science and Engineering of Composite Materials

2016 | journal-article

Analysis of behaviour biocompatible titanium alloy (Ti-6Al-7Nb) in the micro-cutting

Measurement: Journal of the International Measurement Confederation

2016 | journal-article

Analysis of the hard turning of AISI H13 steel with ceramic tools based on tool geometry: surface roughness, tool wear and their relation

Journal of the Brazilian Society of Mechanical Sciences and Engineering

2016 | journal-article

Assessment of delamination in composite materials: A review

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2016 | journal-article

Ceramic matrix composites: Materials, manufacturing and engineering

Ceramic Matrix Composites: Materials, Manufacturing and Engineering

2016 | book

Challenges in Higher Education for Sustainability Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2016 | journal-article

Comparative study of the performance of diamond-coated drills on the delamination in drilling of carbon fiber reinforced plastics: Assessing the influence of the temperature of the drill

Journal of Composite Materials

2016 | journal-article

Computational Approaches to Materials Design: Theoretical and Practical Aspects Preface

Sustainable Nanosystems Development, Properties, and Applications

2016 | journal-article

Computational Materials Design: Different Concepts and Aspects

Sustainable Nanosystems Development, Properties, and Applications

2016 | journal-article

Computational materials design: Different concepts and aspects

Computational Approaches to Materials Design: Theoretical and Practical Aspects

2016 | book-chapter

Delamination of carbon fiber reinforced plastics: Analysis of the drilling method

Indian Journal of Engineering and Materials Sciences

2016 | journal-article

Design of Experiments in Production Engineering Preface

Design of Experiments in Production Engineering

2016 | journal-article

Design of Experiments-Statistical and Artificial Intelligence Analysis for the Improvement of Machining Processes: A Review

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2016 | journal-article

Ecotribology Research Developments Preface

Ecotribology: Research Developments

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Editorial

International Journal of Manufacturing Technology and Management

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Editorial

Journal of Manufacturing Technology Research

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Estimation of Mechanical and Tribological Properties of Epoxy-Based Green Composites

Sustainable Nanosystems Development, Properties, and Applications

2016 | journal-article

Estimation of mechanical and tribological properties of epoxy-based green composites

Green Approaches to Biocomposite Materials Science and Engineering

2016 | book-chapter

Examination and modification of equivalent delamination factor for assessment of high speed drilling

Journal of Mechanical Science and Technology

2016 | journal-article

Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB2 hybrid aluminum composites synthesized by friction stir processing

Materials and Design

2016 | journal-article

MBA Theory and Application of Business and Management Principles Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2016 | journal-article

Management for sustainable development

Management for Sustainable Development

2016 | book

Mathematical concepts and applications in mechanical engineering and mechatronics

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2016 | book

Metal Cutting Technologies Progress and Current Trends Preface

Metal Cutting Technologies: Progress and Current Trends

2016 | journal-article

Metal cutting technologies: Progress and current trends

Metal Cutting Technologies: Progress and Current Trends

2016 | book

Microfabrication and precision engineering: Research and development

Microfabrication and Precision Engineering: Research and Development

2016 | book

Modeling and optimization in tribological parameters of polyether ether ketone matrix composites using D-optimal design

Journal of Thermoplastic Composite Materials

2016 | journal-article

Multi-objective Optimization of Engine Parameters While Bio-lubricant-Biofuel Combination of VCR Engine Using Taguchi-Grey Approach

Micro and Nano Machining of Engineering Materials: Recent Developments

2016 | journal-article

Optimization of process parameters using taguchi coupled genetic algorithm: Machining in CNC lathe

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2016 | book-chapter

Organizational management: Policies and practices in a global market

Organizational Management: Policies and Practices in a Global Market

2016 | book

Parametric design optimization of hard turning of AISI 4340 steel (69 HRC)

International Journal of Advanced Manufacturing Technology

2016 | journal-article

Preface

Metal Cutting Technologies: Progress and Current Trends

2016 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2016 | book

Preface

Computational Approaches to Materials Design: Theoretical and Practical Aspects

2016 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2016 | book

Preface

Computational Approaches to Materials Design: Theoretical and Practical Aspects

2016 | book

Preface

Ceramic Matrix Composites: Materials, Manufacturing and Engineering

2016 | book

Preface

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2016 | book

Preface

Management for Sustainable Development

2016 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2016 | book

Preface

Materials Forming and Machining: Research and Development

2016 | book

Preface

Ceramic Matrix Composites: Materials, Manufacturing and Engineering

2016 | book

Preface

Ceramic Matrix Composites: Materials, Manufacturing and Engineering

2016 | book

Preface

Materials Forming and Machining: Research and Development

2016 | book

Preface

Metal Cutting Technologies: Progress and Current Trends

2016 | book

Recent developments in sustainable manufacturing of gears: A review

Journal of Cleaner Production

2016 | journal-article

Surface Roughness Investigation in the Hard Turning of Steel Using Ceramic Tools

Materials and Manufacturing Processes

2016 | journal-article

The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals

Measurement: Journal of the International Measurement Confederation

2016 | journal-article

Woodhead Publishing in Mechanical Engineering Materials Forming and Machining Research and Development Preface

MATERIALS FORMING AND MACHINING: RESEARCH AND DEVELOPMENT

2016 | journal-article

A note on the use of the minimum quantity lubrication (MQL) system in turning

Industrial Lubrication and Tribology

2015 | journal-article

A review on investigations in drilling of fiber reinforced plastics

Machinability of Fibre-Reinforced Plastics

2015 | book-chapter

Analysis of ignition risk in intermittent turning of UNS M11917 magnesium alloy at low cutting speeds based on the chip morphology

Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture

2015 | journal-article

Delamination in composite materials: Measurement, assessment and prediction

Machinability of Fibre-Reinforced Plastics

2015 | book-chapter

Design-of-experiments application in machining titanium alloys for aerospace structural components

Measurement: Journal of the International Measurement Confederation

2015 | journal-article

Drilling of high impact polystyrene composites materials

Machinability of Fibre-Reinforced Plastics

2015 | book-chapter

Fabrication of experimental set-up and testing

SpringerBriefs in Applied Sciences and Technology

2015 | book

Finite Element Method in Machining Processes: A Review

Micro and Nano Machining of Engineering Materials: Recent Developments

2015 | journal-article

Fundamentals of machining

Machining with Nanomaterials: Second Edition

2015 | book-chapter

Fundamentals of machining

Machining with Nanomaterials: Second Edition

2015 | book

Gamification in engineering education and professional training

International Journal of Mechanical Engineering Education

2015 | journal-article

Human resource management challenges and changes

Human Resource Management Challenges and Changes

2015 | book

Innovation Management In Research and Industry Preface

Innovation Management: in Research and Industry

2015 | journal-article

Innovation management: In research and industry

Innovation Management: In Research and Industry

2015 | book

Introduction

SpringerBriefs in Applied Sciences and Technology

2015 | book

Literature review

SpringerBriefs in Applied Sciences and Technology

2015 | book

Lubrication Aspects during Single Point Incremental Forming for Steel and Aluminum Materials

International Journal of Precision Engineering and Manufacturing

2015 | journal-article

Machinability of fibre-reinforced plastics

Machinability of Fibre-Reinforced Plastics

2015 | book

Machinability of fibre-reinforced plastics

Machinability of Fibre-Reinforced Plastics

2015 | book

Machinability of metal matrix composites

SpringerBriefs in Applied Sciences and Technology

2015 | book

Machining and Machining Modeling of Metal Matrix Composites-A Review

Micro and Nano Machining of Engineering Materials: Recent Developments

2015 | journal-article

Machining of brittle materials using nanostructured diamond tools

Machining with Nanomaterials: Second Edition

2015 | book-chapter

Machining of brittle materials using nanostructured diamond tools

Machining with Nanomaterials: Second Edition

2015 | book

Manufacturing engineering: New research

Manufacturing Engineering: New Research

2015 | book

Manufacturing engineering: New research

Manufacturing Engineering: New Research

2015 | book

Materials Forming and Machining: Research and Development

Materials Forming and Machining: Research and Development

2015 | book

Materials Forming and Machining: Research and Development

Materials Forming and Machining: Research and Development

2015 | book

Metal matrix composites: Synthesis, wear characteristics, machinability study of MMC brake drum

SpringerBriefs in Applied Sciences and Technology

2015 | book

Modern Manufacturing Engineering Preface

Modern Manufacturing Engineering

2015 | journal-article

Multiple performance optimization in drilling using Taguchi method with utility and modified utility concepts

Materials Forming and Machining: Research and Development

2015 | book-chapter

Multiple performance optimization in drilling using Taguchi method with utility and modified utility concepts

Materials Forming and Machining: Research and Development

2015 | book

Preface

Materials Forming and Machining: Research and Development

2015 | book

Preface

Sustainability in Higher Education

2015 | book

Preface

Machinability of Fibre-Reinforced Plastics

2015 | book

Preface

Processing Techniques and Tribological Behavior of Composite Materials

2015 | book

Preface

Manufacturing Engineering: New Research

2015 | book

Preface

Research Advances in Industrial Engineering

2015 | book

Preface

Human Resource Management Challenges and Changes

2015 | book

Preface

Innovation Management: In Research and Industry

2015 | book

Preface

Manufacturing Engineering: New Research

2015 | book

Preface

Processing Techniques and Tribological Behavior of Composite Materials

2015 | book

Preface

Human Resource Management Challenges and Changes

2015 | book

Preface

Machinability of Fibre-Reinforced Plastics

2015 | book

Preface

Thermal Sprayed Coatings and Their Tribological Performances

2015 | book

Preface

Thermal Sprayed Coatings and Their Tribological Performances

2015 | book

Preface

Innovation Management: In Research and Industry

2015 | book

Preface

Manufacturing Engineering: New Research

2015 | book

Preface

Thermal Sprayed Coatings and their Tribological Performances

2015 | book

Preface

Materials Forming and Machining: Research and Development

2015 | book

Preface

Research Advances in Industrial Engineering

2015 | book

Preface

Sustainability in Higher Education

2015 | book

Preface

Materials Forming and Machining: Research and Development

2015 | book

Processing techniques and tribological behavior of composite materials

Processing Techniques and Tribological Behavior of Composite Materials

2015 | book

Quality in the machining: Characteristics and techniques to obtain good results

Manufacturing Engineering: New Research

2015 | book-chapter

Specific cutting energy employed to study the influence of the grain size in the micro-milling of the hardened AISI H13 steel

International Journal of Advanced Manufacturing Technology

2015 | journal-article

Surface integrity in the micromachining: A review

Reviews on Advanced Materials Science

2015 | journal-article

Sustainability in Higher Education

Sustainability in Higher Education

2015 | book

Sustainability in Higher Education

Sustainability in Higher Education

2015 | book

Synthesis of metal matrix composites

SpringerBriefs in Applied Sciences and Technology

2015 | book

Thermal sprayed coatings and their tribological performances

Thermal Sprayed Coatings and their Tribological Performances

2015 | book

Wear analysis

SpringerBriefs in Applied Sciences and Technology

2015 | book

An Investigation of Ductile Regime Machining of Silicon Nitride Ceramics

Machinability of Advanced Materials

2014 | journal-article

DISCONTINUOUS CUTTING: FAILURE MECHANISMS, TOOL MATERIALS AND TEMPERATURE STUDY - A REVIEW

Reviews on Advanced Materials Science

2014 | journal-article

Design and selection of chemically deposited Ni-P-W coatings for optimum tribological behavior

Surface Engineering Techniques and Applications: Research Advancements

2014 | book-chapter

Discontinuous cutting: Failure mechanisms, tool materials and temperature study - A review

Reviews on Advanced Materials Science

2014 | journal-article

Editorial

International Journal of Manufacturing Technology and Management

2014 | journal-article

Effects of Alloying Elements on the Machinability of Near-Eutectic Al-Si Casting Alloys

Machinability of Advanced Materials

2014 | journal-article

Engineering Education: Curriculum, Pedagogy and Didactic Aspects

Engineering Education: Curriculum, Pedagogy and Didactic Aspects

2014 | book

Experimental investigation on finish intermittent turning of UNS M11917 magnesium alloy under dry machining

International Journal of Advanced Manufacturing Technology

2014 | journal-article

Experimental investigation on surface finish during intermittent turning of UNS M11917 magnesium alloy under dry and near dry machining conditions

Measurement

2014 | journal-article

Experimental studies on hole quality and machinability characteristics in drilling of unreinforced and reinforced polyamides

Journal of Composite Materials

2014 | journal-article

Handbook of Research on Nanoscience, Nanotechnology, and Advanced Materials Preface

Sustainable Nanosystems Development, Properties, and Applications

2014 | journal-article

Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation

International Journal of Advanced Manufacturing Technology

2014 | journal-article

Hybrid modeling and multi-objective optimization of mechanical manufacturing processes,MODELACIÓN HÍBRIDA Y OPTIMIZACIÓN MULTIOBJETIVO DE PROCESOS DE MANUFACTURA MECÁNICA

Anales de la Academia de Ciencias de Cuba

2014 | journal-article

Laser Applications in the Field of Plastics

Comprehensive Materials Processing

2014 | book-chapter

Machinability of Advanced Materials

Machinability of Advanced Materials

2014 | book

Machinability of Advanced Materials Preface

Machinability of Advanced Materials

2014 | journal-article

Machinability of Titanium and Its Alloys

Machinability of Advanced Materials

2014 | journal-article

Machinability: Existing and Advanced Concepts

Machinability of Advanced Materials

2014 | journal-article

Machining Behavior of Polymer Composites Materials for Automotive Applications

Polimeros-Ciencia E Tecnologia

2014 | journal-article

Machining of Titanium Alloys Preface

Machining of Titanium Alloys

2014 | journal-article

Metal matrix composites: Materials, manufacturing and engineering

Metal Matrix Composites: Materials, Manufacturing and Engineering

2014 | book

Milling Burr Formation and Avoidance

Machinability of Advanced Materials

2014 | journal-article

Modeling and Optimization of Mechanical Systems and Processes

Micro and Nano Machining of Engineering Materials: Recent Developments

2014 | journal-article

Modern Mechanical Engineering preface

Modern Mechanical Engineering: Research, Development and Education

2014 | journal-article

Monitoring and processing signal applied in machining processes - A review

Measurement

2014 | journal-article

Nanotechnology applications for improvements in energy efficiency and environmental management

Nanotechnology Applications for Improvements in Energy Efficiency and Environmental Management

2014 | book

Preface

Machinability of Advanced Materials

2014 | book

Preface

Transfer and Management of Knowledge

2014 | book

Preface

Handbook of Research on Nanoscience, Nanotechnology, and Advanced Materials

2014 | book

Preface

Surface Engineering Techniques and Applications: Research Advancements

2014 | book

Preface

Engineering Education: Curriculum, Pedagogy and Didactic Aspects

2014 | book

Preface

Engineering Education: Curriculum, Pedagogy and Didactic Aspects

2014 | book

Preface

Metal Matrix Composites: Materials, Manufacturing and Engineering

2014 | book

Sicp-Reinforced Al6063 MMCs: mechanical behavior and microstructural analysis

Lecture Notes in Mechanical Engineering

2014 | book-chapter

Taylor's model based analysis of turning inserts tool-life in the dry turning of UNS R56400 alloy

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2014 | conference-paper

The Machinability of Hard Materials - A Review

Machinability of Advanced Materials

2014 | book-chapter

The Machinability of Hard Materials - A Review

Machinability of Advanced Materials

2014 | journal-article

Transfer and Management of Knowledge

Transfer and Management of Knowledge

2014 | book

Application of artificial neural network for the prediction of surface roughness in drilling GFRP composites

Materials Science Forum

2013 | book

Behavior of composite laminates with drilled and moulded hole under tensile load

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Biomaterials and Medical Tribology: Research and Development

Biomaterials and Medical Tribology: Research and Development

2013 | book

Biomedical composites: Materials, manufacturing and engineering

Biomedical Composites: Materials, Manufacturing and Engineering

2013 | book

Biotribology

Biotribology

2013 | journal-article

Challenges in drilling of multi-materials

Materials Science Forum

2013 | book

Drilling of composites

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Drilling of polymer-matrix composites

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Editorial

International Journal of Materials and Product Technology

2013 | journal-article

Effect of B4C on mechanical properties and tribological behaviour of AA 6061-B4C composites

Journal of the Balkan Tribological Association

2013 | journal-article

Effects of drill points while drilling at high spindle speed

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Effects of drill points while drilling of composites

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Effects of drilling parameters on mechanical strength

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Electrical discharge machining: Study on machining characteristics of WC/Co composites

Machining and Machine-Tools: Research and Development

2013 | book-chapter

Experimental delamination analyses of CFRPs using different drill geometries

Composites Part B: Engineering

2013 | journal-article

Functional Nanomaterials for Energy and Environmental Applications Preface

Thermec: International Conference on Processing and Manufacturing of Advanced Materials

2013 | journal-article

Fuzzy modeling and analysis on the turning parameters for machining force and specific cutting pressure in CFRP composites

Materials Science Forum

2013 | book

Industrial Engineering: Concepts, Methodologies, Tools and Applications

International Journal of Manufacturing, Materials, and Mechanical Engineering

2013 | journal-article

Influence of graphite particles on surface roughness and chip formation studies in turning metal matrix composites

Materials Research

2013 | journal-article

Interdisciplinary Mechatronics Engineering Science and Research Development Preface

Interdisciplinary Mechatronics: Engineering Science and Research Development

2013 | journal-article

Interdisciplinary Mechatronics: Engineering Science and Research Development

Interdisciplinary Mechatronics: Engineering Science and Research Development

2013 | journal-article

Introduction

SpringerBriefs in Applied Sciences and Technology

2013 | book

Investigations on the drilling process of unreinforced and reinforced polyamides using Taguchi method

Composites Part B: Engineering

2013 | journal-article

Lasers in Manufacturing

Lasers in Manufacturing

2013 | book

MODELING AND OPTIMIZATION TECHNIQUES IN MACHINING OF HARDENED STEELS: A BRIEF REVIEW

Reviews on Advanced Materials Science

2013 | journal-article

Machining and machine-tools: Research and development

Machining and Machine-Tools: Research and Development

2013 | book

Machining of Titanium Alloys and Composites for Aerospace Applications Preface

Thermec: International Conference on Processing and Manufacturing of Advanced Materials

2013 | journal-article

Management and Engineering Innovation

Management and Engineering Innovation

2013 | book

Management and Engineering Innovation Preface

Management and Engineering Innovation

2013 | journal-article

Mechanical Engineering Education

Mechanical Engineering Education

2013 | book

Mechatronics

Mechatronics

2013 | journal-article

Micromanufacturing Processes

International Journal of Manufacturing, Materials, and Mechanical Engineering

2013 | journal-article

Minimum Quantity Lubrication in Machining

Sustainable Manufacturing

2013 | book-chapter

Minimum Quantity Lubrication in Machining

Sustainable Manufacturing

2013 | journal-article

Modeling and optimization techniques in machining of hardened steels: A brief review

Reviews on Advanced Materials Science

2013 | journal-article

Multi-response optimization in drilling of glass epoxy polymer composites using simulated annealing approach

Materials Science Forum

2013 | book

Nanocomposites Materials, Manufacturing and Engineering Preface

Nanocomposites: Materials, Manufacturing and Engineering

2013 | journal-article

Nanocomposites: Materials, manufacturing and engineering

Nanocomposites: Materials, Manufacturing and Engineering

2013 | book

Nontraditional machining processes: Research advances

Nontraditional Machining Processes: Research Advances

2013 | book

Numerical prediction of the critical thrust force causing delamination at the hole exit

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Prediction of cutting forces during turning PA66 GF-30 glass fiber reinforced polyamide by soft computing techniques

Materials Science Forum

2013 | book

Preface

Nanocomposites: Materials, Manufacturing and Engineering

2013 | book

Preface

Materials Science Forum

2013 | book

Preface

Statistical and Computational Techniques in Manufacturing

2013 | book

Preface

Machining and Machine-Tools: Research and Development

2013 | book

Preface

Research Developments in Wood Engineering and Technology

2013 | book

Preface

Wear of Advanced Materials

2013 | book

Preface

Biomaterials and Medical Tribology: Research and Development

2013 | book

Preface

Wood Machining

2013 | book

Preface

Engineering Creative Design in Robotics and Mechatronics

2013 | book

Preface

Management and Engineering Innovation

2013 | book

Preface

Research Developments in Wood Engineering and Technology

2013 | book

Preface

Interdisciplinary Mechatronics: Engineering Science and Research Development

2013 | book

Preface

Mechanical Engineering Education

2013 | book

Preface

Biotribology

2013 | book

Preface

Nontraditional Machining Processes: Research Advances

2013 | book

Preface

Lasers in Manufacturing

2013 | book

Preface

Mechatronics

2013 | book

Preface

Biomedical Composites: Materials, Manufacturing and Engineering

2013 | book

Preface

Research Developments in Wood Engineering and Technology

2013 | book

Preface

Nanocomposites: Materials, Manufacturing and Engineering

2013 | book

REVIEW ON MACHINABILITY OF TITANIUM ALLOYS: THE PROCESS PERSPECTIVE

Reviews on Advanced Materials Science

2013 | journal-article

Review on machinability of titanium alloys: The process perspective

Reviews on Advanced Materials Science

2013 | journal-article

Role of carbon nanotubes (CNTs) in improving wear properties of polypropylene (PP) in dry sliding condition

Materials and Design

2013 | journal-article

SPECIAL ISSUE: ADVANCES IN MACHINING PROCESSES

International Journal of Materials and Product Technology

2013 | journal-article

Soft Computing Techniques for Machining of Composites Preface

Thermec: International Conference on Processing and Manufacturing of Advanced Materials

2013 | journal-article

State-of-the-art research in machinability of hardened steels

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2013 | journal-article

Surface roughness minimization in turning PEEK-CF30 composites with TiN cutting tools using particle swarm optimization

Materials Science Forum

2013 | book

Sustainable Manufacturing

Sustainable Manufacturing

2013 | book

Thermomechanical behavior in orthogonal micro-turning of AISI 1045 steel (Ck45 - DIN): Finite element method simulation and experimental validation,Comportamento termo mecânico no micro-torneamento ortogonal do aço AISI 1045 (Ck45 - DIN): Simulação via elementos finitos e validação experimental

Ciencia e Tecnologia dos Materiais

2013 | journal-article

Tribology of ceramics and ceramic matrix composites

Tribology for Scientists and Engineers: From Basics to Advanced Concepts

2013 | book-chapter

A BRIEF REVIEW ON MICROMACHINING OF MATERIALS

Reviews on Advanced Materials Science

2012 | journal-article

A brief review on micromachining of materials

Reviews on Advanced Materials Science

2012 | journal-article

A detailed comparison of dry and air-cooled turning

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Acknowledgment

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book

Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites

Journal of Materials Science and Technology

2012 | journal-article

Analysis on drilling of glass fiber-reinforced polymer (GFRP) composites using grey relational analysis

Materials and Manufacturing Processes

2012 | journal-article

Application of Particle Swarm Optimization for Achieving Desired Surface Roughness in Tungsten-Copper Alloy Machining

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book-chapter

Application of Taguchi Method with Grey Fuzzy Logic for the Optimization of Machining Parameters in Machining Composites

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book-chapter

Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics

Measurement: Journal of the International Measurement Confederation

2012 | journal-article

Artificial intelligence tools

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Case of study

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Computational Methods and Optimization in Machining of Metal Matrix Composites

Machining of Metal Matrix Composites

2012 | journal-article

Computational Methods for Optimizing Manufacturing Technology: Models and Techniques

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book

Computational methods and optimization in machining of metal matrix composites

Machining of Metal Matrix Composites

2012 | book-chapter

Drilling of Metal matrix composites: A brief overview

Metal Matrix Composites

2012 | book-chapter

Drilling of glass fiber/vinyl ester composites with fillers

Materials and Manufacturing Processes

2012 | journal-article

Dry machining

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Dynamic Methods and Process Advancements in Mechanical, Manufacturing, and Materials Engineering

Dynamic Methods and Process Advancements in Mechanical Manufacturing and Materials Engineering

2012 | book

Economics of environmentally friendly machining

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Editorial

International Journal of Materials and Product Technology

2012 | journal-article

Environmentally Friendly Machining

2012 | book

Epilogue: Looking at the future

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Finite element in manufacturing processes

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Gas-cooled machining

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Green manufacturing

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Influence of lubrication on machinability of sintering Tungsten/Copper composite (WCu25),Influência da lubrificação na maquinabilidade do compósito Tungsténio/Cobre sinterizado (WCu25)

Ingeniare

2012 | journal-article

Introduction

SpringerBriefs in Applied Sciences and Technology

2012 | book

MICRO MILLING OF METALLIC MATERIALS - A BRIEF OVERVIEW

Transactions of Famena

2012 | journal-article

Machinability study of steels in precision orthogonal cutting

Materials Research

2012 | journal-article

Machining of complex sculptured surfaces

Machining of Complex Sculptured Surfaces

2012 | book

Machining of metal matrix composites

Machining of Metal Matrix Composites

2012 | book

Machining with minimal cutting fluid

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Materials and surface engineering Research and development Preface

Materials and Surface Engineering: Research and Development

2012 | journal-article

Materials and surface engineering: Research and development

Materials and Surface Engineering: Research and Development

2012 | book

Mechatronics and Manufacturing Engineering: Research and Development

Mechatronics and Manufacturing Engineering: Research and Development

2012 | book

Mechatronics and intelligent manufacturing

Mechatronics and Intelligent Manufacturing

2012 | book

Mechatronics and manufacturing engineering Research and development Preface

Mechatronics and Manufacturing Engineering: Research and Development

2012 | journal-article

Metal matrix composites

Metal Matrix Composites

2012 | book

Micro milling of metallic materials - A brief overview

Transactions of Famena

2012 | journal-article

Minimising burr size in drilling: Integrating response surface methodology with particle swarm optimisation

Mechatronics and Manufacturing Engineering: Research and Development

2012 | book-chapter

Minimising burr size in drilling: integrating response surface methodology with particle swarm optimisation

Mechatronics and Manufacturing Engineering: Research and Development

2012 | journal-article

Nanocomposite coatings: A review

Materials and Surface Engineering Research and Development

2012 | book-chapter

Nanocomposite coatings: A review

Materials and Surface Engineering: Research and Development

2012 | book-chapter

Nanocomposite coatings: A review

Materials and Surface Engineering: Research and Development

2012 | journal-article

Offline and online optimization of machining processes

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Optimal mql and cutting conditions determination for desired surface roughness in turning of brass using genetic algorithms

Machining Science and Technology

2012 | journal-article

Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates

Composites Part B: Engineering

2012 | journal-article

Optimization of machining parameters for multiple performances in drilling hybrid composites using desirability-based approach

Metal Matrix Composites

2012 | book-chapter

PROPERTIES AND APPLICATIONS OF TITANIUM ALLOYS: A BRIEF REVIEW

Reviews on Advanced Materials Science

2012 | journal-article

Preface

Dynamic Methods and Process Advancements in Mechanical Manufacturing and Materials Engineering

2012 | book

Preface

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book

Preface

Mechatronics and Intelligent Manufacturing

2012 | book

Preface

Metal Matrix Composites

2012 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2012 | book

Preface

The Design and Manufacture of Medical Devices

2012 | book

Preface

Mechatronics and Manufacturing Engineering: Research and Development

2012 | book

Preface

Materials and Surface Engineering: Research and Development

2012 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2012 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2012 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2012 | book

Preface

Materials and Surface Engineering: Research and Development

2012 | book

Preface

Machining of Metal Matrix Composites

2012 | book

Preface

Machining of Complex Sculptured Surfaces

2012 | book

Properties and applications of titanium alloys: A brief review

Reviews on Advanced Materials Science

2012 | journal-article

RESIDUAL STRESSES IN MACHINING USING FEM ANALYSIS - A REVIEW

Reviews on Advanced Materials Science

2012 | journal-article

Residual stresses in machining using FEM analysis - A review

Reviews on Advanced Materials Science

2012 | journal-article

Single and multi-objective optimization methodologies in CNC machining

Statistical and Computational Techniques in Manufacturing

2012 | book-chapter

Special Issue on Developments in Machining Technology

International Journal of Materials and Product Technology

2012 | journal-article

State of the Art on Micromilling of Materials, a Review

Journal of Materials Science and Technology

2012 | journal-article

Surface roughness analysis in high-speed drilling of unreinforced and reinforced polyamides

Journal of Composite Materials

2012 | journal-article

THE ROLE OF FLOW STRESS AND FRICTION COEFFICIENT IN FEM ANALYSIS OF MACHINING: A REVIEW

Reviews on Advanced Materials Science

2012 | journal-article

The Design and Manufacture of Medical Devices

The Design and Manufacture of Medical Devices

2012 | book

The design and manufacture of medical devices Preface

Design and Manufacture of Medical Devices

2012 | journal-article

The role of flow stress and friction coefficient in fem analysis of machining: A review

Reviews on Advanced Materials Science

2012 | journal-article

Thermo-mechanical behavior in the micromachining of the AISI 4140: Numerical simulation with experimental validation,Comportamento termomecânico na microusinagem do AÇO AISI 4140: Simulação numérica com validação experimental

Ciencia y Engenharia/ Science and Engineering Journal

2012 | journal-article

Tool wear in machining processes for composites

Machining Technology for Composite Materials: Principles and Practice

2012 | journal-article

A study aimed at minimizing delamination during drilling of CFRP composites

Journal of Composite Materials

2011 | journal-article

Computational Methods and Optimization

Machining of Hard Materials

2011 | journal-article

Computational methods and optimization

Machining of Hard Materials

2011 | book-chapter

Effects of high speed in the drilling of glass whisker-reinforced polyamide composites (PA66 GF30): Statistical analysis of the roughness parameters

Journal of Composite Materials

2011 | journal-article

Fractal analysis in CNC end milling

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fractal analysis in CNC turning

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fractal analysis in EDM

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fractal analysis in cylindrical grinding

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fundamental consideration

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fuzzy set-based set-up planning system with the ability for online learningg

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2011 | journal-article

Incorporation of material behavior in modeling of metal forming and machining processes: A review

Materials and Design

2011 | journal-article

Laser cladding: An overview

Laser Beams: Theory, Properties and Applications

2011 | book-chapter

Machining of hard materials

Machining of Hard Materials

2011 | book

Machining with abrasives

Machining with Abrasives

2011 | book

Manufacturing technology research

Manufacturing Technology Research

2011 | book

Mechatronics Preface

Mechatronics

2011 | journal-article

Modern machining technology A practical guide Preface

Modern Machining Technology: a Practical Guide

2011 | journal-article

Modern machining technology: A practical guide

Modern Machining Technology: A Practical Guide

2011 | book

Nanogrinding

Machining with Abrasives

2011 | book-chapter

Nanogrinding

Machining with Abrasives

2011 | journal-article

Performance comparison of conventional and wiper ceramic inserts in hard turning through artificial neural network modeling

International Journal of Advanced Manufacturing Technology

2011 | journal-article

Physical thermomechanical behavior in machining an aluminium alloy (7075-o) using polycrystalline diamond tool

Materials and Manufacturing Processes

2011 | journal-article

Preface

Machining of Hard Materials

2011 | book

Preface

Machining with Abrasives

2011 | book

Preface

Tribology for Engineers: A Practical Guide

2011 | book

Preface

Manufacturing Technology Research

2011 | book

Role of powder in the machining of Al-10%Sicp metal matrix composites by powder mixed electric discharge machining

Journal of Composite Materials

2011 | journal-article

SPECIAL ISSUE: NANOINDENTATION AND NANOTRIBOLOGY

International Journal of Surface Science and Engineering

2011 | journal-article

Surface Integrity

Machining of Hard Materials

2011 | journal-article

Surface integrity

Machining of Hard Materials

2011 | book-chapter

Surface roughness measurement in turning carbon steel AISI 1045 using wiper inserts

Measurement: Journal of the International Measurement Confederation

2011 | journal-article

Tool wear in machining processes for composites

Machining Technology for Composite Materials: Principles and Practice

2011 | book-chapter

Tribology for Engineers A practical guide Preface

Tribology for Engineers: a Practical Guide

2011 | journal-article

Tribology for Engineers: A Practical Guide

Tribology for Engineers: A Practical Guide

2011 | book

Tribology for engineers: A practical guide

Tribology for Engineers: A Practical Guide

2011 | book

A STUDY ON SURFACE QUALITY IN MICROMILLING

Micro and Nanomanufacturing Research

2010 | journal-article

A surface roughness analysis in turning of Polyamide PA-6 using statistical techniques

International Journal of Materials and Product Technology

2010 | journal-article

A surface roughness analysis in turning of polyamide PA-6 using statistical techniques

International Journal of Materials and Product Technology

2010 | journal-article

APPLICATION OF FUZZY LOGIC IN MANUFACTURING: A STUDY ON MODELING OF CUTTING FORCE IN TURNING GFRP COMPOSITES

Artificial Intelligence in Manufacturing Research

2010 | journal-article

Analysis and optimisation of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool

International Journal of Materials and Product Technology

2010 | journal-article

Analysis and optimisation of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool

International Journal of Materials and Product Technology

2010 | journal-article

Computational analysis of the intimate contact between an inclined wedge and low carbon steel during metal cutting

International Journal of Materials and Product Technology

2010 | journal-article

Computational analysis of the intimate contact between an inclined wedge and low carbon steel during metal cutting

International Journal of Materials and Product Technology

2010 | journal-article

Determination of optimum amount lubricant in drilling using soft-computing tools: Desired surface roughness

International Journal of Materials and Product Technology

2010 | journal-article

Determination of optimum amount lubricant in drilling using soft-computing tools: desired surface roughness

International Journal of Materials and Product Technology

2010 | journal-article

Economic machining analysis of using coated cutting tools machining M42 tool steel at unusually low cutting speeds

International Journal of Computational Materials Science and Surface Engineering

2010 | journal-article

Editorial: A brief overview of artificial intelligence applications in machining

International Journal of Machining and Machinability of Materials

2010 | journal-article

FEM machining analysis: Influence of rake angle in cutting of aluminium alloys using Polycrystalline Diamond cutting tools

International Journal of Materials and Product Technology

2010 | journal-article

FEM machining analysis: influence of rake angle in cutting of aluminium alloys using Polycrystalline Diamond cutting tools

International Journal of Materials and Product Technology

2010 | journal-article

FINITE ELEMENT MODELLING OF MACHINING ALUMINIUM ALLOY (AL 7075) AND EXPERIMENTAL VALIDATION

Metal Cutting: Research Advances

2010 | journal-article

Finite element modelling of machining aluminium alloy (Al 7075) and experimental validation

Metal Cutting: Research Advances

2010 | book-chapter

Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation

Simulation Modelling Practice and Theory

2010 | journal-article

Finite element simulation and experimental analysis of orthogonal cutting of an aluminium alloy using Polycrystalline Diamond tools

International Journal of Materials and Product Technology

2010 | journal-article

Finite element simulation and experimental analysis of orthogonal cutting of an aluminium alloy using polycrystalline diamond tools

International Journal of Materials and Product Technology

2010 | journal-article

MODELING AND ANALYSIS ON WEAR BEHAVIOUR OF METAL MATRIX COMPOSITES

Tribology of Composite Materials

2010 | journal-article

MULTI-OBJECTIVE OPTIMISATION OF CUTTING PARAMETERS FOR DRILLING ALUMINIUM AA1050

Artificial Intelligence in Manufacturing Research

2010 | journal-article

Machinability analysis in turning tungsten-copper composite for application in EDM electrodes

International Journal of Refractory Metals and Hard Materials

2010 | journal-article

Machinability evaluation in unreinforced and reinforced PEEK composites using response surface models

Journal of Thermoplastic Composite Materials

2010 | journal-article

Machinability evaluation in unreinforced and reinforced PEEK composites using response surface models

Journal of Thermoplastic Composite Materials

2010 | journal-article

Machinability study in turning of unreinforced (PA6) and reinforced (PA66 GF30) polyamides with Polycrystalline Diamond (PCD) tools

International Journal of Materials and Product Technology

2010 | journal-article

Machinability study in turning of unreinforced (PA6) and reinforced (PA66 GF30) polyamides with Polycrystalline Diamond (PCD) tools

International Journal of Materials and Product Technology

2010 | journal-article

Metal cutting: Research advances

Metal Cutting: Research Advances

2010 | book

Modeling and analysis of machinability characteristics in PA6 and PA66 GF30 polyamides through artificial neural network

Journal of Thermoplastic Composite Materials

2010 | journal-article

Multiobjective optimization of grinding process parameters using particle swarm optimization algorithm

Materials and Manufacturing Processes

2010 | journal-article

NUMERICAL SIMULATION AND EXPERIMENTAL VALIDATION WHEN PRECISION RADIAL TURNING AISI 1045 STEEL

Micro and Nanomanufacturing Research

2010 | journal-article

Nano and Micromachining

Nano and Micromachining

2010 | book

Neural network approach for estimating the residual tensile strength after drilling in uni-directional glass fiber reinforced plastic laminates

Materials and Design

2010 | journal-article

OPTIMIZATION OF ABRASIVE FLOW MACHINING PROCESS PARAMETERS USING PARTICLE SWARM OPTIMIZATION AND SIMULATED ANNEALING ALGORITHMS

Artificial Intelligence in Manufacturing Research

2010 | journal-article

Optimisation of process parameters of mechanical type advanced machining processes using a simulated annealing algorithm

International Journal of Materials and Product Technology

2010 | journal-article

Optimisation of process parameters of mechanical type advanced machining processes using a simulated annealing algorithm

International Journal of Materials and Product Technology

2010 | journal-article

Optimization of surface roughness in micromilling

Materials and Manufacturing Processes

2010 | journal-article

Parameter optimization of ultrasonic machining process using nontraditional optimization algorithms

Materials and Manufacturing Processes

2010 | journal-article

Performance of diamond coated tools (CVD) in machining polyamides

International Journal of Materials and Product Technology

2010 | journal-article

Performance of diamond coated tools (CVD) in machining polyamides

International Journal of Materials and Product Technology

2010 | journal-article

Preface

Surface Integrity in Machining

2010 | book

Preface

Nano and Micromachining

2010 | book

Preface

Metal Cutting: Research Advances

2010 | book

SPECIAL ISSUE: EXPERIMENTAL AND NUMERICAL STUDIES ON MACHINABILITY OF MATERIALS

International Journal of Materials and Product Technology

2010 | journal-article

STUDY OF EFFECTS OF PROCESS PARAMETERS ON BURR HEIGHT IN DRILLING OF AISI 316 STAINLESS STEEL USING ARTIFICIAL NEURAL NETWORK MODEL

Artificial Intelligence in Manufacturing Research

2010 | journal-article

Study on the influence of MQL and cutting conditions on machinability of brass using Artificial Neural Network

International Journal of Materials and Product Technology

2010 | journal-article

Study on the influence of MQL and cutting conditions on machinability of brass using Artificial Neural Network

International Journal of Materials and Product Technology

2010 | journal-article

Surface Integrity in Machining

Surface Integrity in Machining

2010 | journal-article

Surface Texture Characterization and Evaluation Related to Machining

Surface Integrity in Machining

2010 | journal-article

Surface texture characterization and evaluation related to machining

Surface Integrity in Machining

2010 | book-chapter

THE EFFECT OF CUTTING SPEED ON CUTTING FORCES AND SURFACE FINISH WHEN MICRO-TURNING POLYAMIDES

Micro and Nanomanufacturing Research

2010 | journal-article

THE SURFACE INTEGRITY OF COMPOSITE LAMINATES SUBJECTED TO DRILLING

Composite Laminates: Properties, Performance and Applications

2010 | journal-article

TRIBOLOGY OF FUNCTIONALISED CARBON NANOFILLERS BASED POLYMER COMPOSITES

Tribology of Composite Materials

2010 | journal-article

The influence of tool wear on delamination when drilling glass fibre reinforced epoxy composite with high speed steel and cemented carbide tools

International Journal of Materials and Product Technology

2010 | journal-article

The influence of tool wear on delamination when drilling glass fibre reinforced epoxy composite with high speed steel and cemented carbide tools

International Journal of Materials and Product Technology

2010 | journal-article

The surface integrity of composite laminates subjected to drilling

Composite Laminates: Properties, Performance and Applications

2010 | book-chapter

A soft computing based optimisation of multi-pass turning processes

International Journal of Materials and Product Technology

2009 | journal-article

A study of drilling performances with minimum quantity of lubricant using fuzzy logic rules

Mechatronics

2009 | journal-article

A study of plastic strain and plastic strain rate in machining of steel AISI 1045 using FEM analysis

Materials and Design

2009 | journal-article

ANALYSIS OF DELAMINATION IN DRILLING WOOD COMPOSITE MEDIUM DENSITY FIBREBOARDS

Drilling of Composite Materials

2009 | journal-article

Analysis of machinability during hard turning of cold work tool steel (type: AISI D2)

Materials and Manufacturing Processes

2009 | journal-article

Application of goal programming technique for electro discharge machining (EDM) characteristics of cemented carbide (WC/Co)

International Journal of Materials and Product Technology

2009 | journal-article

Assessment of some factors influencing tool wear on the machining of glass fibre-reinforced plastics by coated cemented carbide tools

Journal of Materials Processing Technology

2009 | journal-article

Dimensional and geometric deviations induced by drilling of polymeric composite

Journal of Reinforced Plastics and Composites

2009 | journal-article

EFFECT OF APPLIED LOAD ON DRY SLIDING WEAR BEHAVIOUR AND SUBSURFACE STUDIES ON HYBRID METAL MATRIX COMPOSITES

Tribology Research Advances

2009 | journal-article

Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at long dry sliding

Wear

2009 | journal-article

Influence of cutting conditions on machinability aspects of PEEK, PEEK CF 30 and PEEK GF 30 composites using PCD tools

Journal of Materials Processing Technology

2009 | journal-article

MODELING TOOL WEAR AND SPECIFIC CUTTING FORCE IN DRILLING OF ALUMINIUM MATRIX COMPOSITES USING ARTIFICIAL NEURAL NETWORKS

Drilling of Composite Materials

2009 | journal-article

MODELS OF FRICTION AND WEAR OF BRASS/STEEL PAIR BASED ON ARTIFICIAL NEURAL NETWORKS

Tribology Research Advances

2009 | journal-article

Machinability aspects concerning micro-turning of PA66-GF30-reinforced polyamide

International Journal of Advanced Manufacturing Technology

2009 | journal-article

Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts

International Journal of Refractory Metals and Hard Materials

2009 | journal-article

Machinability study in microTurning of PA66 GF30 polyamide with a PCD tool

Materials and Manufacturing Processes

2009 | journal-article

Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing

Materials and Design

2009 | journal-article

Merchant model applied to precision orthogonal cutting of pa66 polyamide with and without glass fiber reinforcing

Journal of Composite Materials

2009 | journal-article

Multi-objective optimisation of multipass turning by using a genetic algorithm

International Journal of Materials and Product Technology

2009 | journal-article

Multiperformance optimization in turning of free-machining steel using taguchi method and utility concept

Journal of Materials Engineering and Performance

2009 | journal-article

Neural network process modelling for turning of steel parts using conventional and wiper inserts

International Journal of Materials and Product Technology

2009 | journal-article

Optimisation of Multi-pass cutting parameters in Face-milling based on genetic search

International Journal of Advanced Manufacturing Technology

2009 | journal-article

Optimisation of surface roughness in hard turning AISI D2 steel using TSK-type fuzzy logic rules

International Journal of Materials and Product Technology

2009 | journal-article

Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis

Journal of Materials Processing Technology

2009 | journal-article

Performance of cutting tools in machining Cu/W alloys for application in EDM electrodes

International Journal of Refractory Metals and Hard Materials

2009 | journal-article

Precision radial turning of AISI D2 steel

International Journal of Advanced Manufacturing Technology

2009 | journal-article

Predicting burr size in drilling of AISI 316L stainless steel using response surface analysis

International Journal of Materials and Product Technology

2009 | journal-article

Preparation and characterization of SiAlON matrix composites reinforced with combustion synthesis rod-like SiAlON particles

International Journal of Refractory Metals and Hard Materials

2009 | journal-article

SOME STUDIES ABOUT MACHINING OF MMC'S BY MQL(MINIMUM QUANTITY OF LUBRICANT) CONDITIONS

Composites and Advanced Materials

2009 | journal-article

SPECIAL ISSUE: ADVANCES IN THE ANALYSIS OF SURFACE TEXTURE IN ENGINEERING MANUFACTURE

International Journal of Surface Science and Engineering

2009 | journal-article

SPECIAL ISSUE: INTELLIGENT MACHINING: COMPUTATIONAL METHODS AND OPTIMISATION

International Journal of Materials and Product Technology

2009 | journal-article

Some studies about machining of MMC'S by MQL (minimum quantity of lubricant) conditions

Advanced Composites Letters

2009 | journal-article

Some studies in metal matrix composites machining using response surface methodology

Journal of Reinforced Plastics and Composites

2009 | journal-article

Study on Some Aspects of Machinability in Unreinforced and Reinforced Polyamides(vol 43, pg 725, 2007)

Journal of Composite Materials

2009 | journal-article

Study on some aspects of machinability in unreinforced and reinforced polyamides

Journal of Composite Materials

2009 | journal-article

Surface roughness aspects in milling MDF (medium density fibreboard)

International Journal of Advanced Manufacturing Technology

2009 | journal-article

The effect of tool geometry on the machinability of polyamide during precision turning

Journal of Composite Materials

2009 | journal-article

Tool Design, Tool Wear and Tool Life

Machining Dynamics: Fundamentals, Applications and Practices

2009 | journal-article

A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling

International Journal of Advanced Manufacturing Technology

2008 | journal-article

A decision-making framework model for material selection using a combined multiple attribute decision-making method

International Journal of Advanced Manufacturing Technology

2008 | journal-article

An experimental and statistical study on the effect of drill geometries on force and hole quality in drilling of glass fibre reinforced plastic

International Journal of Materials and Product Technology

2008 | journal-article

An investigative study of delamination in drilling of medium density fibreboard (MDF) using response surface models

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites

Journal of Materials Processing Technology

2008 | journal-article

Analysis of surface roughness parameters in turning of FRP tubes by PCD tool

Journal of Materials Processing Technology

2008 | journal-article

Artificial neural network based on genetic learning for machining of polyetheretherketone composite materials

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Chemical vapour deposition (CVD) diamond coated tools performance in machining of PEEK composites

Materials and Design

2008 | journal-article

Comparative study of friction behaviour of alumina and zirconia ceramics against steel under water lubricated conditions

Industrial Lubrication and Tribology

2008 | journal-article

Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model

Materials and Design

2008 | journal-article

Delamination in high speed drilling of Carbon Fiber Reinforced Plastic (CFRP)

Journal of Composite Materials

2008 | journal-article

Development of an empirical model for surface roughness in the machining of Al/SiC particulate composites by PCD tool

International Journal of Materials and Product Technology

2008 | journal-article

Drilling investigation of MDF (medium density fibreboard)

Journal of Materials Processing Technology

2008 | journal-article

Drilling of hybrid aluminium matrix composites

International Journal of Advanced Manufacturing Technology

2008 | journal-article

EDITORIAL RETRACTION

Machining Science and Technology

2008 | journal-article

Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor

International Journal of Machine Tools and Manufacture

2008 | journal-article

Evaluation of cutting quality of PMMA using CO2 lasers

International Journal of Advanced Manufacturing Technology

2008 | journal-article

FEM analysis in high speed machining of aluminium alloy (Al7075-0) using polycrystalline diamond (PCD) and cemented carbide (K10) cutting tools

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Impact of surface roughness of diamond coatings on the cutting performance when dry machining of graphite

International Journal of Manufacturing Technology and Management

2008 | journal-article

Influence of drill point angle in high speed drilling of glass fiber reinforced plastics

Journal of Composite Materials

2008 | journal-article

Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models

Journal of Materials Processing Technology

2008 | journal-article

Investigative study on machinability aspects of unreinforced and reinforced PEEK composite machining using ANN model

Journal of Reinforced Plastics and Composites

2008 | journal-article

Modelling cutting power and tool wear in turning of aluminium matrix composites using artificial neural networks

International Journal of Materials and Product Technology

2008 | journal-article

Modelling of tribological behaviours of composite PEEK-CF30 using BP neural networks

Materials Science- Poland

2008 | journal-article

Modelling of tribological behaviours of composite PEEK-CF30 using BP neural networks

Materials Science-Poland

2008 | journal-article

Multi-parameter surface roughness analysis in turning of polyamide composite using polycrystalline diamond tool

International Journal of Materials and Product Technology

2008 | journal-article

Optimization of electrical discharge machining characteristics of WC/Co composites using non-dominated sorting genetic algorithm (NSGA-II)

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Optimizing friction behavior of clutch facings using pin-on-disk test

International Journal of Physical Sciences

2008 | journal-article

Predicting machinability parameters on drilling glass fibre reinforced plastics using response surface methodology

International Journal of Materials and Product Technology

2008 | journal-article

Predicting the geometric form of clad in laser cladding by powder using multiple regression analysis (MRA)

Materials and Design

2008 | journal-article

Prediction and minimization of delamination in drilling of Medium-Density Fiberboard (MDF) using response surface methodology and Taguchi design

Materials and Manufacturing Processes

2008 | journal-article

Prediction and optimization of surface roughness in milling of medium density fiberboard (MDF) based on Taguchi orthogonal array experiments

Holzforschung

2008 | journal-article

Preface

Machining: Fundamentals and Recent Advances

2008 | book

Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass

Journal of Materials Processing Technology

2008 | journal-article

Some experimental studies on CO2 laser cutting quality of polymeric materials

Journal of Materials Processing Technology

2008 | journal-article

Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques

Journal of Materials Processing Technology

2008 | journal-article

Special issue: Advances in machining of composite materials

International Journal of Materials and Product Technology

2008 | journal-article

Statistical analysis of delamination in drilling Glass Fiber-Reinforced Plastics (GFRP)

Journal of Reinforced Plastics and Composites

2008 | journal-article

Statistical study of surface roughness in turning of peek composites

Materials and Design

2008 | journal-article

Taguchi approach for achieving better machinability in unreinforced and reinforced polyamides

Journal of Reinforced Plastics and Composites

2008 | journal-article

Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept

Journal of Materials Processing Technology

2008 | journal-article

The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite

Materials and Design

2008 | journal-article

Thrust force and wear assessment when drilling glass fiber-reinforced polymeric composite

Journal of Composite Materials

2008 | journal-article

Tools (geometry and material) and tool wear

Machining: Fundamentals and Recent Advances

2008 | book-chapter

A comparative evaluation of the turning of reinforced and unreinforced polyamide

International Journal of Advanced Manufacturing Technology

2007 | journal-article

A note on tribological behaviour of α-sialon/steel couples under dry conditions

Materials and Design

2007 | journal-article

A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates

Composites Science and Technology

2007 | journal-article

Application of Merchant theory in machining particulate metal matrix composites

Materials and Design

2007 | journal-article

Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites

Materials and Design

2007 | journal-article

Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked tool steel with a ceramic tool

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2007 | journal-article

Comparative evaluation of conventional and wiper ceramic tools on cutting forces, surface roughness, and tool wear in hard turning AISI D2 steel

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2007 | journal-article

Delamination assessment after drilling medium-density fibreboard (MDF) by digital image analysis

Holzforschung

2007 | journal-article

Drilling of fiber reinforced plastics: A review

Journal of Materials Processing Technology

2007 | journal-article

Effect of crystalline structure on the hardness and interfacial adherence of flame sprayed poly(ether-ether-ketone) coatings

European Polymer Journal

2007 | journal-article

Evaluation of delamination in drilling medium density fibreboard

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2007 | journal-article

Experimental characterization of frictional behaviour of clutch facings using Pin-on-disk machine

Materials and Design

2007 | journal-article

Experimental cutting model of metal matrix composites (MMCs)

Journal of Materials Processing Technology

2007 | journal-article

Integrating Taguchi principle with genetic algorithm to minimize burr size in drilling of AISI 316L stainless steel using an artificial neural network model

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2007 | journal-article

Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques

Materials and Design

2007 | journal-article

Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites

Materials and Design

2007 | journal-article

Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts

Journal of Materials Processing Technology

2007 | journal-article

New machinability study of glass fibre reinforced plastics using polycrystalline diamond and cemented carbide (K15) tools

Materials and Design

2007 | journal-article

Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search

Optics and Laser Technology

2007 | journal-article

Prediction on tribological behaviour of composite PEEK-CF30 using artificial neural networks

Journal of Materials Processing Technology

2007 | journal-article

Special Issue on Diamond and Diamond-Coated Tools for Machining Precision Surfaces

International Journal of Surface Science and Engineering

2007 | journal-article

Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions

Materials and Manufacturing Processes

2007 | journal-article

Untitled

International Journal of Surface Science and Engineering

2007 | journal-article

Cutting performance of time-modulated chemical vapour deposited diamond coated tool inserts during machining graphite

Diamond and Related Materials

2006 | journal-article

Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2006 | journal-article

Friction and wear behaviour of β-silicon nitride-steel couples under unlubricated conditions

Materials Science and Technology

2006 | journal-article

Laser cladding: An experimental study of geometric form and hardness of coating using statistical analysis

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2006 | journal-article

Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms

Composites Science and Technology

2006 | journal-article

Physical cutting model of Polyetheretherketone composites

Materials and Design

2006 | journal-article

Physical cutting model of polyamide composites (PA66 GF30)

Functionally Graded Materials Vii

2006 | journal-article

The performance of cutting fluids when machining aluminium alloys

Industrial Lubrication and Tribology

2006 | journal-article

Tribological behaviour of the composite PEEK-CF30 at dry sliding against steel using statistical techniques

Materials and Design

2006 | journal-article

A new machinability index in turning fiber reinforced plastics

Journal of Materials Processing Technology

2005 | journal-article

A note on the effect of temperature on the friction and wear behaviour of carbon-fibre-reinforced Polyetheretherketone (PEEK-CF30) at dry sliding

International Journal of Microstructure and Materials Properties

2005 | journal-article

Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments

Journal of Materials Processing Technology

2005 | journal-article

Hard turning: AISI 4340 high strength low alloy steel and AISI D2 cold work tool steel

Journal of Materials Processing Technology

2005 | journal-article

Influence of the chemical composition on the machinability of brasses

Journal of Materials Processing Technology

2005 | journal-article

Optimal machining parameters based on surface roughness experimental data and genetic search

Industrial Lubrication and Tribology

2005 | journal-article

Optimisation of surface roughness on turning fibre-reinforced plastics (FRPs) with diamond cutting tools

International Journal of Advanced Manufacturing Technology

2005 | journal-article

Thermo-mechanical model to predict the tribological behaviour of the composite PEEK-CF30/steel pair in dry sliding using multiple regression analysis

Industrial Lubrication and Tribology

2005 | journal-article

Tribological behaviour of colloidally processed sialon ceramics sliding against steel under dry conditions

Tribology Letters

2005 | journal-article

Wear behavior on advanced structural ceramics: α-sialon matrix reinforced with β-sialon fibers

Materials and Design

2005 | journal-article

Furação de laminados epóxidos reforçados

Revista Iberoamericana de Ingeniería Mecánica

2004 | journal-article

A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA)

Composite Structures

2004 | journal-article

Dimensional precision and surface roughness on turning tubes in fibre reinforced plastics based on the design experiments

International Journal of Materials and Product Technology

2004 | journal-article

Drilling fiber reinforced plastics (FRPs) manufactured by hand lay-up: Influence of matrix (Viapal VHP 9731 and ATLAC 382-05)

Journal of Materials Processing Technology

2004 | journal-article

Dynamical experimental study of friction and wear behaviour of bovine cancellous bone sliding against a metallic counterface in a water lubricated environment

Journal of Materials Processing Technology

2004 | journal-article

Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up

Composites Science and Technology

2004 | journal-article

Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis

Industrial Lubrication and Tribology

2004 | journal-article

Machinability study on composite (polyetheretherketone reinforced with 30% glass fibre?PEEK GF 30) using polycrystalline diamond (PCD) and cemented carbide (K20) tools

The International Journal of Advanced Manufacturing Technology

2004 | journal-article

Multiple regression analysis (MRA) in modelling milling of glass fibre reinforced plastics (GFRP)

International Journal of Manufacturing Technology and Management

2004 | journal-article

Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays

Journal of Materials Processing Technology

2003 | journal-article

Drilling carbon fiber reinforced plastics manufactured by autoclave-experimental and statistical study

Materials and Design

2003 | journal-article

Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced (GF30) for applications in structural components

Composite Structures

2003 | journal-article

Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments

Composite Structures

2003 | journal-article

Study of drilling metal-matrix composites based on the Taguchi techniques

Journal of Materials Processing Technology

2003 | journal-article

Diamond tool performance in machining metal-matrix composites

Journal of Materials Processing Technology

2002 | journal-article

Optimal cutting conditions in turning of particulate metal matrix composites based on experiment and a genetic search model

Composites - Part A: Applied Science and Manufacturing

2002 | journal-article

Tribological Comparative Study of Conventional and Composite Materials in Biomedical Applications

Key Engineering Materials

2002 | journal-article

A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments

Journal of Materials Processing Technology

2001 | journal-article

Cutting force, tool wear and surface finish in drilling metal matrix composites

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2001 | journal-article

Effect of carbon fibre reinforcement in the frictional behaviour of Peek in a water lubricated environment

Wear

2001 | journal-article

Evaluation of tribological behaviour of polymeric materials for hip prostheses application

Tribology Letters

2001 | journal-article

Optimal drilling of particulate metal matrix composites based on experimental and numerical procedures

International Journal of Machine Tools and Manufacture

2001 | journal-article

Optimisation of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model

Journal of Materials Processing Technology

2001 | journal-article

Turning particulate metal matrix composites: experimental study of the evolution of the cutting forces, tool wear and workpiece surface roughness with the cutting time

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2001 | journal-article

Experimental study of the tribological behaviour of the brass/steel pair

Journal of Materials Processing Technology

2000 | journal-article

Friction and adhesion behavior of polycrystalline diamond films deposited on metals

Surface and Coatings Technology

2000 | journal-article

Relationship between cutting force and PCD cutting tool wear in machining silicon carbide reinforced aluminum

Journal of Materials Processing Technology

2000 | journal-article

Relationship between flexural strength and surface roughness for hot-pressed Si3N4 self-reinforced ceramics

Journal of the European Ceramic Society

2000 | journal-article

Multi-Objective Robotics Optimization Using Improved MO-BxR Algorithms

Applied Sciences

2026 | journal-article

Experimental Study on Drilling Performance of Bio-Waste-Based Corn Husk Fiber Reinforced Epoxy Composites for Green Applications

Journal of Manufacturing and Materials Processing

2026 | journal-article

Numerical and experimental analysis of machinability aspects and surface damage in drilling MD-CFRP laminates

Composites Part B Engineering

2026 | journal-article

Optimization of Different Metal Casting Processes Using Three Simple and Efficient Advanced Algorithms

Metals

2025 | journal-article

Advancements in Hole Quality for AISI 1045 Steel Using Helical Milling

Journal of Manufacturing and Materials Processing

2025 | journal-article

Titanium alloys for medical applications - A brief review

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

2025 | journal-article

Single, Multi-, and Many-Objective Optimization of Manufacturing Processes Using Two Novel and Efficient Algorithms with Integrated Decision-Making

Journal of Manufacturing and Materials Processing

2025 | journal-article

Multi-Objective Optimisation of Hybrid Banana/Sisal/Red Mud Composites Using Taguchi–Grey Relational Analysis

Journal of Composites Science

2025 | journal-article

Investigation of kerf taper angle and surface roughness in abrasive water jet machined glass fiber-reinforced polyester composites

Advanced Engineering Letters

2025 | journal-article

3D printing assisted corrective orthopedic surgery of veterinary patients

Additive Manufacturing Solutions for Advanced Veterinary Practice Clinical Dentistry Orthopedic and Drug Delivery Methods

2025 | book-chapter

A Review on CAD-Based Programming for Design and Manufacturing

2025 | book-chapter

AI Based Solutions for Inclusive Quality Education

AI Based Solutions for Inclusive Quality Education

2025 | book

An experimental study for ductile mode control on cemented carbide micro-milling

International Journal of Refractory Metals and Hard Materials

2025 | journal-article

Automated Assembly of Mechanical Systems: A Case Study

2025 | book-chapter

Automated Design of Mechanical Parts: A Case Study

2025 | book-chapter

CAD-based Programming for Design and Manufacturing

2025 | book

Challenges and Opportunities in the Artificial Intelligence Era

Challenges and Opportunities in the Artificial Intelligence Era

2025 | book

Chemical Engineering Essentials 1: Comprehensive Chemical Engineering

Chemical Engineering Essentials Volume 1 Comprehensive Chemical Engineering

2025 | book

Chemical Engineering Essentials, Volume 2: Advanced Processes, Materials, and Sustainability

Chemical Engineering Essentials Volume 2 Advanced Processes Materials and Sustainability

2025 | book

Corporate governance for climate transition

Global Change, Peace & Security

2025 | journal-article

Design and fabrication of 3D printed strip for sensing of bone healing after comminuted fracture

Additive Manufacturing Solutions for Advanced Veterinary Practice Clinical Dentistry Orthopedic and Drug Delivery Methods

2025 | book-chapter

Differential equations: A bibliometric analysis

Advances in Differential Equations and Control Processes

2025 | journal-article

Editorial: Additive manufacturing: a bibliometric analysis

International Journal of Materials Engineering Innovation

2025 | journal-article

Editorial: Machinability: a bibliometric analysis

International Journal of Machining and Machinability of Materials

2025 | journal-article

Editorial: Tribology: a bibliometric analysis

International Journal of Surface Science and Engineering

2025 | journal-article

From Industry 4.0 to Industry 6.0

From Industry 4.0 to Industry 6.0

2025 | book

Innovation Management: In Research and Industry

Innovation Management in Research and Industry

2025 | book

Integration of CAD Software Programming for G-code Generation

2025 | book-chapter

Introduction

Sustainable Packaging Strengthened by Biomass Applications and Advancements

2025 | book

Management in Higher Education for Sustainability: Challenges and Ways Forward—A Glance

2025 | book-chapter

Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing

Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing

2025 | book

Nanostructured Thin Film Deposition by Sputtering

Nanostructured Thin Film Deposition by Sputtering from Fundamentals to Applications

2025 | book

Numerical study addressing the CER effect on microscopic chip removal mechanisms of CFRPs via the orthogonal cutting

Composites Part B Engineering

2025 | journal-article

Perceptions of Industry 5.0: Sustainability Perspective

BioResources

2025 | journal-article

Powder Metallurgy

Powder Metallurgy Characterization Processing and Optimization Techniques

2025 | book

Preface

Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing

2025 | book

Preface

From Industry 4.0 to Industry 6.0

2025 | book

Preface

Technopreneurship and Sustainability: Innovation, Challenges, and Opportunities

2025 | book

Preface

Chemical Engineering Essentials Volume 2 Advanced Processes Materials and Sustainability

2025 | book

Preface

Chemical Engineering Essentials Volume 1 Comprehensive Chemical Engineering

2025 | book

Preface

Sustainable Packaging Strengthened by Biomass Applications and Advancements

2025 | book

Preface

Transformative Role of Transformer Models in Healthcare

2025 | book

Preface

Challenges and Opportunities in the Artificial Intelligence Era

2025 | book

Preface

Smart Heat Transfer and Thermal Management Leveraging AI Machine Learning and Soft Computing

2025 | book

Processing Methods for Developing Advanced Composite Materials

Current Materials Science

2025 | journal-article

Role of fintech in revamping the banking world

Mastering Deepfake Technology Strategies for Ethical Management and Security

2025 | book-chapter

Smart Heat Transfer and Thermal Management

Smart Heat Transfer and Thermal Management Leveraging AI Machine Learning and Soft Computing

2025 | book

Solid Model Geometric Objects Detection Based on CAD Software Programming

2025 | book-chapter

Strategic Framework and Intelligent Solutions for Sustainable Cities and Communities

Strategic Framework and Intelligent Solutions for Sustainable Cities and Communities

2025 | book

Sustainable Development Goals: A Bibliometric Analysis

Journal of Sustainability Research

2025 | journal-article

Sustainable Packaging Strengthened by Biomass

Sustainable Packaging Strengthened by Biomass Applications and Advancements

2025 | book

Technopreneurship and Sustainability: Innovation, Challenges, and Opportunities

Technopreneurship and Sustainability: Innovation, Challenges, and Opportunities

2025 | book

The Key Role of Life Cycle Design Strategies in the Eco-Design of a Kitchen Island Project

Handbook of Design and Industry Scenarios for Sustainable Futures

2025 | book-chapter

Transformative Role of Transformer Models in Healthcare

Transformative Role of Transformer Models in Healthcare

2025 | book

Transforming Business Management with AI, BI, and Data-Driven Decision-Making

Transforming Business Management with AI Bi and Data Driven Decision Making

2025 | book

Vibration: A bibliometric analysis

Sound and Vibration

2025 | other

Manufacturing

International Journal of Manufacturing, Materials, and Mechanical Engineering

2024 | journal-article

3D printed hernia mesh implant: a conformability study

Exploration of BioMat-X

2024 | journal-article

Computer Simulation-Based Multi-Objective Optimisation of Additively Manufactured Cranial Implants

Technologies

2024 | journal-article

A Chip Formation Study of the Micro-Cutting of Commercially Pure Titanium

Metals

2024 | journal-article

Computer Simulation-Based Multi-objective Optimisation of Additively Manufactured Cranial Implants

2024 | preprint

Bio-materials for intramedullary pin application in canine femur: a comparative analysis

Exploration of BioMat-X

2024 | journal-article

The role of roughness parameters in grading the machined surface quality in Ti-alloys

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2024 | journal-article

A hybrid numerical and experimental approach towards Ti6Al4V alloy sustainable orthogonal turning

Journal of Cleaner Production

2024 | journal-article

ARTIFICIAL INTELLIGENCE IN PRODUCTION ENGINEERING AND MANAGEMENT

Artificial Intelligence in Production Engineering and Management

2024 | book

An Image Processing Approach for Morphology Characterization of Serration in Ti-6Al-7Nb Chip Sliding Surface

Lecture Notes in Mechanical Engineering

2024 | journal-article

Bio-dielectrics to improve the performance of electro discharge machining–an investigation for cleaner production opportunities

Advances in Materials and Processing Technologies

2024 | journal-article

Circular Economy and Manufacturing

Circular Economy and Manufacturing

2024 | book

Composite materials: A bibliometric analysis

AIMS Materials Science

2024 | journal-article

Control Of Ductile Mode Machining During Micro-Milling Of Cemented Carbide

Proceedings - Euro PM 2024 Congress and Exhibition

2024 | conference-paper

Digital image processing algorithm for industrial on-site roughness evaluation in Ti-alloy machining

Materials Research Proceedings

2024 | conference-paper

Editorial: Biomaterials: a bibliometric analysis

International Journal of Materials Engineering Innovation

2024 | journal-article

Editorial: Machining: a bibliometric analysis

International Journal of Machining and Machinability of Materials

2024 | journal-article

Engineering materials for efficient energy storage and conversion

Engineering Materials for Efficient Energy Storage and Conversion

2024 | book

Friction Stir Welding and Processing: Fundamentals to Advancements

Friction Stir Welding and Processing: Fundamentals to Advancements

2024 | book

Functional Coatings for Biomedical, Energy, and Environmental Applications

Functional Coatings for Biomedical, Energy, and Environmental Applications

2024 | book

Functional Coatings: Innovations and Challenges

Functional Coatings: Innovations and Challenges

2024 | book

Influence of machining parameters on edge quality of particleboards: modeling and optimization

International Journal of Advanced Manufacturing Technology

2024 | journal-article

Influence of machining parameters on edge quality of particleboards: modeling and optimization (Jul, 10.1007/s00170-024-14033-5, 2024)

The International Journal of Advanced Manufacturing Technology

2024 | journal-article

Innovating Sustainability Through Digital Circular Economy

Innovating Sustainability Through Digital Circular Economy

2024 | book

Introduction

Sustainability Innovation and Consumer Preference

2024 | book

Introduction

Innovating Sustainability Through Digital Circular Economy

2024 | book

Investigation into the effects of machining parameters on the edge quality of particleboards - Modelling and Optimization

Research Square

2024 | other

Investigation on micro-milling of cemented carbide with ball nose and corner radius diamond-coated end mills

The International Journal of Advanced Manufacturing Technology

2024 | journal-article

Machine Intelligence in Mechanical Engineering

Machine Intelligence in Mechanical Engineering

2024 | book

Machine intelligence in mechanical engineering: an introduction

Machine Intelligence in Mechanical Engineering

2024 | book-chapter

Machining of a functional hip prosthesis cone in TI-6AL-4V ELI titanium alloy produced by electron beam melting

Journal of the Brazilian Society of Mechanical Sciences and Engineering

2024 | journal-article

Materials and manufacturing engineering: A bibliometric analysis

Mari Papel y Corrugado

2024 | journal-article

Preface

Production, Properties, and Applications of Engineered Cementitious Composites

2024 | book

Preface

Functional Coatings for Biomedical, Energy, and Environmental Applications

2024 | book

Preface

Lecture Notes on Multidisciplinary Industrial Engineering

2024 | book

Preface

Artificial Intelligence in Production Engineering and Management

2024 | book

Preface

Circular Economy and Manufacturing

2024 | book

Preface

Friction Stir Welding and Processing: Fundamentals to Advancements

2024 | book

Preface

Functional Coatings: Innovations and Challenges

2024 | book

Preface

Machine Intelligence in Mechanical Engineering

2024 | book

Preface

Engineering Materials for Efficient Energy Storage and Conversion

2024 | book

Preface

Sustainability Innovation and Consumer Preference

2024 | book

Preface

Innovating Sustainability Through Digital Circular Economy

2024 | book

Production, properties, and applications of engineered cementitious composites

Production, Properties, and Applications of Engineered Cementitious Composites

2024 | book

Sustainability, Innovation, and Consumer Preference

Sustainability Innovation and Consumer Preference

2024 | book

Sustainable Manufacturing: An Emergence in Industry 4.0

Sustainable Manufacturing: An Emergence in Industry 4.0

2024 | book

Sustainable and Intelligent Manufacturing: Perceptions in line with 2030 Agenda of Sustainable Development

BioResources

2024 | journal-article

A case study of hybrid manufacturing of a Ti-6Al-4V titanium alloy hip prosthesis

The International Journal of Advanced Manufacturing Technology

2023 | journal-article

The Impact of Hole Diameter on the Molded and Drilled Holes in Jute-Fiber-Reinforced Epoxy Composites

Journal of Composites Science

2023 | journal-article

Applications of Nanoparticles in Various Manufacturing Processes

2023 | book-chapter

Sustainability in the Modernization of Higher Education: Curricular Transformation and Sustainable Campus—A Literature Review

Sustainability

2023 | journal-article

Digital representation of the wear behaviour of Ti-6Al-4V and Ti-6Al-7Nb biomaterial alloys: A fractal analysis of the worn surface

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

2023 | journal-article

Development of the Al12SiCuFe Alloy Foam Composites with ZrSiO4 Reinforcements at Different Foaming Temperatures

Metals

2023 | journal-article

Robot-Assisted Cold and Warm Incremental Sheet Forming of Aluminum Alloy 6061: A Comparative Study

Metals

2023 | journal-article

A Comparative Study in Forming Behavior of Different Grades of Steel in Cold Forging Backward Extrusion by Integrating Artificial Neural Network (ANN) with Differential Evolution (DE) Algorithm

Applied Sciences

2023 | journal-article

3D Finite Element Simulation of CK45 Steel Face-Milling: Chip Morphology and Tool Wear Validation

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

A Comparative Assessment on Microstructure, Mechanical and Tribological Behaviour of Light Aluminium–Trialuminide Composites

International Journal of Metalcasting

2023 | journal-article

A Comparative Study Between 2D and 3D Finite Element Methods in Machining

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

A Pedagogical Gadget for Teaching Heat Transfer

Engineering Pedagogy: A Collection of Articles in Honor of Prof. Amitabha Ghosh

2023 | book-chapter

A critical review on mechanical micro-drilling of glass and carbon fibre reinforced polymer (GFRP and CFRP) composites

Composites Part B: Engineering

2023 | journal-article

A review on advanced cutting tools and technologies for edge trimming of carbon fibre reinforced polymer (CFRP) composites

Composites Part B: Engineering

2023 | journal-article

Advances in MEMS and Microfluidic Systems

Advances in MEMS and Microfluidic Systems

2023 | book

Application of micro machining and additive manufacturing processes for difficult-to-cut materials in aerospace industry—a review

Modern Manufacturing Processes for Aircraft Materials

2023 | book-chapter

Applications of nanoparticles in various manufacturing processes

Sustainable Utilization of Nanoparticles and Nanofluids in Engineering Applications

2023 | book-chapter

Cellulose Composites Processing and Characterization Preface

Cellulose Composites

2023 | journal-article

Comparative study of deep drilling in the Ti-6Al-4 V ELI titanium alloy using standard and high-feed rate

The International Journal of Advanced Manufacturing Technology

2023 | journal-article

Computational Design and Digital Manufacturing Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2023 | journal-article

Corporate Governance for Climate Transition

Corporate Governance for Climate Transition

2023 | book

Development, properties, and industrial applications of 3D printed polymer composites

Development, Properties, and Industrial Applications of 3D Printed Polymer Composites

2023 | book

Experimental Study on the Effect of In/Out Radial-Finned Heat Sink with PCM under Constant and Intermittent Power Mode in Power LEDs

International Journal of Photoenergy

2023 | journal-article

Experimental and 3D Numerical Study of AA7075-T6 Drilling Process

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

FEM-Based Study of AISI52100 Steel Machining: A Combined 2D and 3D Approach

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

Fundamentals of 3D Finite Element Modeling in Conventional Machining

SpringerBriefs in Applied Sciences and Technology

2023 | book-chapter

Futuristic Manufacturing: Perpetual Advancement and Research Challenges

Futuristic Manufacturing: Perpetual Advancement and Research Challenges

2023 | book

Handbook of research on advanced functional materials for orthopedic applications

Handbook of Research on Advanced Functional Materials for Orthopedic Applications

2023 | book

Higher Education for Sustainability in Portugal: A Glimpse About What Has Been Studied and Published

2023 | book-chapter

Industry 5.0: Creative and Innovative Organizations

Industry 5.0: Creative and Innovative Organizations

2023 | book

Investigation on Effect of Radial and Extended Fins in PCM Heat Sink for LED Cooling

Journal of Harbin Institute of Technology (New Series)

2023 | journal-article

MILLING PARAMETERS' INFLUENCE ON MACHINABILITY IN MILLING OF CFRP COMPOSITES FUNCTIONALIZED WITH G AND GO

Surface Review and Letters

2023 | journal-article

Morphological characterization of chip segmentation in Ti-6Al-7Nb machining: A novel method based on digital image processing

Measurement

2023 | journal-article

Nanocomposite and nanohybrid materials: Processing and applications

Nanocomposite and Nanohybrid Materials: Processing and Applications

2023 | book

Numerical Study of Different Tools in High- Speed MQL Cutting of Aluminum Alloys

Advances in Transdisciplinary Engineering

2023 | conference-paper

Parametric optimisation of milling process for the machining of carbon nanotubes-based hybrid aluminium composite

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2023 | journal-article

Polylactic acid composites: Sustainable biocomposites

Polylactic Acid Composites: Sustainable Biocomposites

2023 | book

Polymer Nanocomposites: Fabrication to Applications

Polymer Nanocomposites: Fabrication to Applications

2023 | book

Preface

Sustainable Utilization of Nanoparticles and Nanofluids in Engineering Applications

2023 | book

Preface

Industry 5.0: Creative and Innovative Organizations

2023 | book

Preface

Advances in MEMS and Microfluidic Systems

2023 | book

Preface

Advances in MEMS and Microfluidic Systems

2023 | book

Preface

Lecture Notes in Mechanical Engineering

2023 | book

Preface

Waste Residue Composites

2023 | book

Preface

Development, Properties, and Industrial Applications of 3D Printed Polymer Composites

2023 | book

Preface

Futuristic Manufacturing: Perpetual Advancement and Research Challenges

2023 | book

Preface

Lecture Notes in Mechanical Engineering

2023 | book

Preface

Handbook of Research on Advanced Functional Materials for Orthopedic Applications

2023 | book

Preface

Corporate Governance for Climate Transition

2023 | book

Preface

Lecture Notes in Mechanical Engineering

2023 | book

Preface

Lecture Notes in Mechanical Engineering

2023 | book

Preface

Advances in Transdisciplinary Engineering

2023 | conference-paper

Recent Advances in the Manufacturing of Polymeric Composites

Advances in Materials Science and Engineering

2023 | journal-article

Some Studies on Measurement of Worn Surface by Digital Image Processing

International Journal of Image and Graphics

2023 | journal-article

Statistical learning and optimization of the helical milling of the biocompatible titanium Ti-6Al-7Nb alloy

International Journal of Advanced Manufacturing Technology

2023 | journal-article

Sustainable Materials and Manufacturing Technologies

Sustainable Materials and Manufacturing Technologies

2023 | book

Sustainable utilization of nanoparticles and nanofluids in engineering applications

Sustainable Utilization of Nanoparticles and Nanofluids in Engineering Applications

2023 | book

The Impact of Hole Diameter on the Moulded and Drilled Holes in Jute Fibre Reinforced Epoxy Composites

Preprints.org

2023 | journal-article

Tribology in Sustainable Manufacturing

Tribology in Sustainable Manufacturing

2023 | book

Using Harris Hawk algorithm for experimental study on the hole dilation mechanism during Micro-machining (μM) of Graphene nanoplatelets/Carbon fiber (GnP/C) reinforced polymeric composite

Materials Research Express

2023 | journal-article

Waste residue composites

Waste Residue Composites

2023 | book

Advancements in the Additive Manufacturing of Magnesium and Aluminum Alloys through Laser-Based Approach

Materials

2022 | journal-article

Natural Computing-Based Designing of Hybrid UHMWPE Composites for Orthopedic Implants

Applied Sciences

2022 | journal-article

Effect of Titanium Based Alloys on Thermo-Mechanical Behavior in 3D Forging Simulation

Metals

2022 | journal-article

Multi-Response Optimization during the High-Speed Drilling of Composite Laminate Using the Grey Entropy Fuzzy Method (GEF)

Processes

2022 | journal-article

Effect of Thermo-Physical Properties of the Tool Materials on the Electro-Discharge Machining Performance of Ti-6Al-4V and SS316 Work Piece Materials

Journal of Manufacturing and Materials Processing

2022 | journal-article

Understanding the Mechanism of Abrasive-Based Finishing Processes Using Mathematical Modeling and Numerical Simulation

Metals

2022 | journal-article

Characterization of Microstructure and High Temperature Compressive Strength of Austenitic Stainless Steel (21-4N) through Powder Metallurgy Route

Crystals

2022 | journal-article

Tribological Performance and Rheological Properties of Engine Oil with Graphene Nano-Additives

Lubricants

2022 | journal-article

Higher Education for Sustainability: A Bibliometric Approach—What, Where and Who Is Doing Research in This Subject?

Sustainability

2022 | journal-article

Tool Wear Rate and Surface Integrity Studies in Wire Electric Discharge Machining of NiTiNOL Shape Memory Alloy Using Diffusion Annealed Coated Electrode Materials

Machines

2022 | journal-article

Energy Conversion Strategies for Wind Energy System: Electrical, Mechanical and Material Aspects

Materials

2022 | journal-article

On the Machining Temperature and Hole Quality of CFRP Laminates when Using Diamond-Coated Special Drills

Journal of Composites Science

2022 | journal-article

Design and Structural Simulations of a Custom Li-Po Accumulator for Low Range, Lightweight, Single-Seater, Open Cockpit, and Open-Wheeled Racecar

Energies

2022 | journal-article

A critical review addressing drilling-induced damage of CFRP composites

Composite Structures

2022 | journal-article

Advances in Metal Additive Manufacturing

Advances in Metal Additive Manufacturing

2022 | book

An experimental investigation on milling features of fully-sintered zirconia ceramics using PCD tools

Materials and Manufacturing Processes

2022 | journal-article

Comparative study of titanium alloys machinability used for medical applications

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2022 | journal-article

Development of FEM-based digital twins for machining difficult-to-cut materials: A roadmap for sustainability

Journal of Manufacturing Processes

2022 | journal-article

Effect of organoclays on mechanical properties of glass fiber-reinforced epoxy nanocomposite

Polymer Bulletin

2022 | journal-article

Experimental study of drilling behaviors and damage issues for woven GFRP composites using special drills

Journal of Materials Research and Technology

2022 | journal-article

Green Production Engineering and Management

Green Production Engineering and Management

2022 | book

Higher Education for Sustainable Development Goals

Higher Education for Sustainable Development Goals

2022 | book

Higher Education: Progress for Management and Engineering

Higher Education: Progress for Management and Engineering

2022 | book

Industrial tribology: Sustainable machinery and industry 4.0

Industrial Tribology: Sustainable Machinery and Industry 4.0

2022 | book

Innovation and Sustainable Manufacturing: Research and Development

Innovation and Sustainable Manufacturing: Research and Development

2022 | book

Machine Learning Applications for The Tensile Property Evaluation of Steel: An Overview

Handbook of Smart Materials, Technologies, and Devices: Applications of Industry 4.0: Volume 1-3

2022 | book-chapter

Machining Effects of Fibrous Composites and Related Stacks for Aerospace Applications

Advanced Composites in Aerospace Engineering Applications

2022 | book-chapter

Machining of titanium alloys for medical application - a review

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2022 | journal-article

Nonconventional Machining

Nonconventional Machining

2022 | book

Numerical study of interface damage formation mechanisms in machining CFRP/Ti6Al4V stacks under different cutting sequence strategies

Composite Structures

2022 | journal-article

Organizational Innovation in the Digital Age

Organizational Innovation in the Digital Age

2022 | book

Practice of artificial intelligence in welding and additive manufacturing

Advances in Sustainable Manufacturing - A Catalyst for Processes and Systems for Next Generation Manufacturing

2022 | book-chapter

Prediction of tensile strength in squeeze casted hybrid aluminium matrix composites using conventional statistical approach

Advances in Materials and Processing Technologies

2022 | journal-article

Preface

Higher Education: Progress for Management and Engineering

2022 | book

Preface

Green Production Engineering and Management

2022 | book

Preface

Nonconventional Machining

2022 | book

Preface

Higher Education for Sustainable Development Goals

2022 | book

Preface

Organizational Innovation in the Digital Age

2022 | book

Preface

Innovation and Sustainable Manufacturing: Research and Development

2022 | book

Preface

Advances in Metal Additive Manufacturing

2022 | book

Principles of Entrepreneurship in the Industry 4.0 Era

Principles of Entrepreneurship in the Industry 4.0 Era

2022 | book

SWOT analysis of Industry 4.0 variables using AHP methodology and structural equation modelling

Benchmarking

2022 | journal-article

Synthesis and characterization of flyash reinforced polymer composites developed by Fused Filament Fabrication

Journal of Materials Research and Technology

2022 | journal-article

The Combined Effect of Banana Fiber and Fly Ash Reinforcements on the Mechanical Behavior of Polyester Composites

Journal of Natural Fibers

2022 | journal-article

Tribological Performance Optimization of Mg-WC Nanocomposites in Dry Sliding: A Statistical Approach

Frontiers in Materials

2022 | journal-article

High-Temperature Corrosion Performance of FeAl-Based Alloys Containing Carbon in Molten Salt

Metals

2021 | journal-article

A Study of the Effect of Conventional Drilling and Helical Milling in Surface Quality in Titanium Ti-6Al-4V and Ti-6AL-7Nb Alloys for Medical Applications

Arabian Journal for Science and Engineering

2021 | journal-article

A novel methodology for simultaneous minimization of manufacturing objectives in tolerance allocation of complex assembly

Applied Sciences (Switzerland)

2021 | journal-article

A review on micro-milling: recent advances and future trends

International Journal of Advanced Manufacturing Technology

2021 | journal-article

A semi-analytical model for predicting tool wear progression in drilling CFRP

Wear

2021 | journal-article

Additive Manufacturing: A Tool for Industrial Revolution 4.0

Additive Manufacturing A Tool for Industrial Revolution 4 0

2021 | book

Additive Manufacturing: A volume in Handbooks in Advanced Manufacturing

Additive Manufacturing

2021 | book

Advanced Materials and Manufacturing Processes

Advanced Materials and Manufacturing Processes

2021 | book

Advanced Welding and Deforming

Advanced Welding and Deforming

2021 | book

Advanced materials and multi-materials applied in aeronautical and automotive fields: A systematic review approach

Procedia CIRP

2021 | conference-paper

Analysis and Optimization of Truss Structures, Constrained Handling using Genetic Algorithm

Journal of Applied and Computational Mechanics

2021 | journal-article

Comparison between the machinability of different titanium alloys (Ti–6Al–4V and Ti–6Al–7Nb) employing the multi-objective optimization

Journal of the Brazilian Society of Mechanical Sciences and Engineering

2021 | journal-article

Current tools and methodology for a sustainable product life cycle and design

Sustainable Manufacturing and Design

2021 | book-chapter

Evaluation of desirability function approach and grey relation analysis for modeling circularity, perpendicularity and cylindricity in drilling magnesium AZ31

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2021 | journal-article

Experimental and Numerical Investigations in Mechanical Machining of Fibre-Reinforced Composite Materials

Advances in Materials Science and Engineering

2021 | journal-article

Foreword

Advanced Machining and Finishing

2021 | book

Harmony search algorithm for minimizing assembly variation in non-linear assembly

Applied Sciences (Switzerland)

2021 | journal-article

Intelligent machining methods for Ti6Al4V: A review

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2021 | journal-article

Introduction

Engineering Materials

2021 | book-chapter

Joining processes for dissimilar and advanced materials

Joining Processes for Dissimilar and Advanced Materials

2021 | book

Knowledge Management and Learning Organizations

Knowledge Management and Learning Organizations

2021 | book

Light Weight Materials: Processing and Characterization

Light Weight Materials: Processing and Characterization

2021 | book

Machining of Ebm Ti-6AL-4V Titanium Alloy Functional Femoral Cone

ResearchSquare

2021 | other

Machining of Ebm Ti-6AL-4V Titanium Alloy Functional Femoral Cone

Research Square

2021 | other

Machining responses of high-strength carbon/epoxy composites using diamond-coated brad spur drills

Materials and Manufacturing Processes

2021 | journal-article

Material model assessment in Ti6Al4V machining simulations with FEM

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science

2021 | journal-article

Mechanism of surface generation in grinding aa6061-tib2/zrb2 in-situ composite

Journal of Computational and Applied Research in Mechanical Engineering

2021 | journal-article

On Nanographene-Reinforced Polyvinylidene Fluoride Composite Matrix for 4D Applications

Journal of Materials Engineering and Performance

2021 | journal-article

On the effects of bio-based nanolubricants formulation for the turning of Inconel 718

Journal of the Brazilian Society of Mechanical Sciences and Engineering

2021 | journal-article

Optimization of process parameters for turning hastelloy x under different machining environments using evolutionary algorithms: A comparative study

Applied Sciences (Switzerland)

2021 | journal-article

Preface

Lecture Notes in Mechanical Engineering

2021 | book

Preface

Sustainable Manufacturing and Design

2021 | book

Preface

Advanced Materials and Manufacturing Processes

2021 | book

Preface

Advanced Welding and Deforming

2021 | book

Preface

Springer Proceedings in Materials

2021 | book

Preface

Knowledge Management and Learning Organizations

2021 | book

Preface

Light Weight Materials: Processing and Characterization

2021 | book

Preface

Additive Manufacturing: A Tool for Industrial Revolution 4.0

2021 | book

Relevance of micromachining in microfluidics and biomedical devices

Advanced Machining and Finishing

2021 | book-chapter

Series Foreword

Sustainable Manufacturing

2021 | book

Series Foreword

Advanced Welding and Deforming

2021 | book

Structural and Mechanical Analysis of APCVD Deposited Diamond-Like Carbon Thin Films

Silicon

2021 | journal-article

Surface topography in machining Ti alloys for biomedical applications: correlative microscopy approach for qualitative and quantitative analysis

International Journal of Advanced Manufacturing Technology

2021 | journal-article

Sustainable Manufacturing and Design

Sustainable Manufacturing and Design

2021 | book

Toolpath and machining parameters optimisation of the cavities of a knee prosthesis tibial insert

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2021 | journal-article

Tribological characterisation of magnesium matrix nanocomposites: A review

Advances in Mechanical Engineering

2021 | journal-article

Wear behavior of special tools in the drilling of CFRP composite laminates

Wear

2021 | journal-article

Additive and subtractive manufacturing: Emergent technologies

Additive and Subtractive Manufacturing: Emergent Technologies

2020 | book

Additive manufacturing for patient-specific medical use

Additive and Subtractive Manufacturing: Emergent Technologies

2020 | book-chapter

Additive manufacturing for patient-specific medical use

Drilling Technology: Fundamentals and Recent Advances

2020 | journal-article

Advanced Features in Sheet Metal

2020 | book-chapter

Analysis of forming behavior in cold forging of aisi 1010 steel using artificial neural network

Metals

2020 | journal-article

Assembly

2020 | book-chapter

Assembly Continued

2020 | book-chapter

Basic Sketch Relations and Dimensioning

2020 | book-chapter

Basics of Drawing

2020 | book-chapter

Classification of Factors Associated with a Closed-Loop Supply Chain System, Their Modelling Methods and Strategies

2020 | book-chapter

Cloud-based optimization in manufacturing digital industries

Manufacturing in Digital Industries: Prospects for Industry 4.0

2020 | book-chapter

Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills

Composite Structures

2020 | journal-article

Correlative microscopy analysis of surface topography in machining Ti-6Al-7Nb

Procedia CIRP

2020 | conference-paper

Digital tribology and the industry 4.0 a note

Manufacturing in Digital Industries: Prospects for Industry 4.0

2020 | book-chapter

Drilling characteristics of carbon/epoxy and carbon/polyimide composites

Materials and Manufacturing Processes

2020 | journal-article

Drilling of carbon fibre reinforced polymer (CFRP) composites: Difficulties, challenges and expectations

Procedia Manufacturing

2020 | conference-paper

Features Including Cuts

2020 | book-chapter

Geometric optimization of drills used to repair holes in magnesium aeronautical components

Metals

2020 | journal-article

High speed machining

High-Speed Machining

2020 | book

High speed machining of composite materials

High-Speed Machining

2020 | book-chapter

Introduction

2020 | book-chapter

Introduction to Sheet Metal

2020 | book-chapter

Introduction to Sketching

2020 | book-chapter

Machinability analysis and optimization in wire EDM of medical grade NiTiNOL memory alloy

Materials

2020 | journal-article

Manufacturing in digital industries: Prospects for industry 4.0

Manufacturing in Digital Industries: Prospects for Industry 4.0

2020 | book

Mastering SolidWorks

2020 | book

Medical devices biomaterials – A review

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

2020 | journal-article

Modern Manufacturing Processes

Modern Manufacturing Processes

2020 | book

Multivariate GR&R through factor analysis

Measurement Journal of the International Measurement Confederation

2020 | journal-article

On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies

Composite Structures

2020 | journal-article

On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites

Polymer Composites

2020 | journal-article

Optimization Using Evolutionary Algorithms and Metaheuristics Applications in Engineering Preface

Optimization Using Evolutionary Algorithms and Metaheuristics: Applications in Engineering

2020 | journal-article

Part Modeling Using Features

2020 | book-chapter

Perspective on the mechanical response of pineapple leaf filler/toughened epoxy composites under diverse constraints

Polymer Bulletin

2020 | journal-article

Prediction of thrust force and cutting torque in drilling of AL 6082-T6 by using the RSM methodology

Journal of Manufacturing Technology Research

2020 | journal-article

Preface

Sustainable Management for Managers and Engineers

2020 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2020 | book

Preface

High-Speed Machining

2020 | book

Preface

Lecture Notes in Mechanical Engineering

2020 | book

Preface

Additive and Subtractive Manufacturing: Emergent Technologies

2020 | book

Preface

Modern Manufacturing Processes

2020 | book

Preface

Lecture Notes in Mechanical Engineering

2020 | book

Preface

High-Speed Machining

2020 | book

Preface

Drilling Technology: Fundamentals and Recent Advances

2020 | journal-article

Rapid prototyping, rapid tooling and reverse engineering: From biological models to 3d bioprinters

Rapid Prototyping, Rapid Tooling and Reverse Engineering: From Biological Models to 3D Bioprinters

2020 | book

Repairing hybrid Mg-Al-Mg components using sustainable cooling systems

Materials

2020 | journal-article

Sketch Entities

2020 | book-chapter

Sustainability Manufacturing Systems Design

Encyclopedia of Renewable and Sustainable Materials: Volume 1-5

2020 | book-chapter

Sustainable Management for Managers and Engineers

Sustainable Management for Managers and Engineers

2020 | book

Thin Features

2020 | book-chapter

To Create a Flanged Coupling

2020 | book-chapter

To Create a Foot Step Bearing

2020 | book-chapter

Tribological characterization of particulate-reinforced aluminum metal matrix nanocomposites: A review

Advanced Composites Letters

2020 | journal-article

Wear resistance performance of die casting materials: A review

Journal of Manufacturing Technology Research

2020 | journal-article

3-D reconstruction by extended depth-of-field in tribological analysis: Fractal approach of sliding surface in Polyamide66 with glass fiber reinforcement

Polymer Testing

2019 | journal-article

ADVANCED APPLICATIONS IN MANUFACTURING ENGINEERING PREFACE

Advanced Applications in Manufacturing Engineering

2019 | journal-article

Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review

Composites Part A: Applied Science and Manufacturing

2019 | journal-article

An assessment of thermosetting infiltrate in powder-based composites made by additive manufacturing

Journal of Composite Materials

2019 | journal-article

An insight into plant-based biodegradable composites

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | book-chapter

An insight into plant-based biodegradable composites

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | journal-article

Analysis of process parameters on centerless grinding by using response surface methodology

Journal of Manufacturing Technology Research

2019 | journal-article

Analysis of secondary adhesion wear mechanism on hard machining of titanium aerospace alloy

Materials

2019 | journal-article

Biodegradable Composites Materials, Manufacturing and Engineering Preface

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | journal-article

Biodegradable Composites: Materials, Manufacturing and Engineering

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | book

Casting

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Computational Methods for Application in Industry 4.0

COMPUTATIONAL METHODS FOR APPLICATION IN INDUSTRY 4.0

2019 | journal-article

Computational Methods for Application in Industry 4.0 Preface

COMPUTATIONAL METHODS FOR APPLICATION IN INDUSTRY 4.0

2019 | journal-article

Digital manufacturing and assembly systems in industry 4.0

Digital Manufacturing and Assembly Systems in Industry 4.0

2019 | book

Editorial

International Journal of Manufacturing Technology and Management

2019 | journal-article

Editorial

International Journal of Materials Engineering Innovation

2019 | journal-article

Emotional intelligence and neuro-linguistic programming: New insights for managers and engineers

Emotional Intelligence and Neuro-Linguistic Programming: New Insights for Managers and Engineers

2019 | book

Engineering education for sustainability

Engineering Education for Sustainability

2019 | book

Enhancing Productivity by Means of High Feed Rate in the Drilling of Al 2011 Aluminium Alloy

Arabian Journal for Science and Engineering

2019 | journal-article

Evolutionary-based methods

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Fabrication and tribological study of AA6061 hybrid metal matrix composites reinforced with SiC/B4C nanoparticles

Industrial Lubrication and Tribology

2019 | journal-article

Fe analysis of roller forces and diametral growth in backward metal flow forming process

Journal of Manufacturing Technology Research

2019 | journal-article

Feasibility study of hole repair and maintenance operations by dry drilling of magnesium alloy UNS M11917 for aeronautical components

Metals

2019 | journal-article

Fire performance of natural fiber reinforced polymeric composites

Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment

2019 | book-chapter

Forming

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Fuzzy Logic for Machining Applications: Review

Soft Computing Techniques and Applications in Mechanical Engineering

2019 | journal-article

General aspects of the application of computational methods in industry 4.0

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Handbook of Research on Green Engineering Techniques for Modern Manufacturing

Soft Computing Techniques and Applications in Mechanical Engineering

2019 | journal-article

Influence of the gas pressure of plasma nitriding on the structural, mechanical and tribological surface properties of AISI 316L

Materials Research

2019 | journal-article

Intelligent Manufacturing

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Introduction to Materials

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions

Procedia Manufacturing

2019 | conference-paper

Machining Process

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Machining of a biomaterial with dual negative tool geometry

Mechanical Behaviour of Biomaterials

2019 | book-chapter

Machining of a biomaterial with dual negative tool geometry

Self-assembling Biomaterials: Molecular Design, Characterization and Application in Biology and Medicine

2019 | journal-article

Manufacturing systems: Their simulation modelling methods and other intelligent systems

Journal of Manufacturing Technology Research

2019 | journal-article

Materials and Manufacturing Processes

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Materials and Manufacturing Processes Preface

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Measurement and optimization of multi-response characteristics in plasma arc cutting of Monel 400™ using RSM and TOPSIS

Measurement: Journal of the International Measurement Confederation

2019 | journal-article

Mechanical Behavior of Biomaterials Preface

Self-assembling Biomaterials: Molecular Design, Characterization and Application in Biology and Medicine

2019 | journal-article

Mechanical Behavior of Epoxy-Based Green Composites

Materials Horizons: From Nature to Nanomaterials

2019 | book-chapter

Mechanical Behaviour of Materials

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Mechanical behaviour of biomaterials

Mechanical Behaviour of Biomaterials

2019 | book

Metallic biomaterials-A review

Self-assembling Biomaterials: Molecular Design, Characterization and Application in Biology and Medicine

2019 | journal-article

Micro and Nano Machining of Engineering Materials Recent Developments Preface

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

Modeling and optimization of Wire-EDM parameters for machining of Ni55.8Ti shape memory alloy using hybrid approach of Taguchi and NSGA-II

International Journal of Advanced Manufacturing Technology

2019 | journal-article

Modeling and optimization of fractal dimension in wire electrical discharge machining of EN 31 steel using the ANN-GA approach

Materials

2019 | journal-article

Multi-objective robust design of helical milling hole quality on AISI H13 hardened steel by normalized normal constraint coupled with robust parameter design

Applied Soft Computing Journal

2019 | journal-article

Multi-response optimization of process parameters in AWJ machining of hybrid GFRP composite by grey relational method

Procedia Manufacturing

2019 | conference-paper

On wire spark erosion machining induced surface integrity of Ni 55.8 Ti shape memory alloys

Archives of Civil and Mechanical Engineering

2019 | journal-article

Optimization and effect of squeeze casting process parameters on tensile strength of hybrid metal matrix composite

Journal of Manufacturing Technology Research

2019 | journal-article

Optimization for engineering problems

Optimization for Engineering Problems

2019 | book

Optimizing production in machining of hardened steels using response surface methodology

Acta Scientiarum - Technology

2019 | journal-article

Other computational methods for optimization

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Performance Study of LaPO4-Y2O3 Composite Fabricated by Sol-Gel Process Using Abrasive Waterjet Machining

Soft Computing Techniques and Applications in Mechanical Engineering

2019 | journal-article

Performance studies on wire electric discharge machining of medical grade nickel titanium (NiTi) shape memory alloy

Journal of Manufacturing Technology Research

2019 | journal-article

Preface

SpringerBriefs in Applied Sciences and Technology

2019 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2019 | book

Preface

Optimization for Engineering Problems

2019 | book

Preface

Mechanical Behaviour of Biomaterials

2019 | book

Preface

Sustainable Engineering Products and Manufacturing Technologies

2019 | book

Preface

Engineering Education for Sustainability

2019 | book

Preface

Emotional Intelligence and Neuro-Linguistic Programming: New Insights for Managers and Engineers

2019 | book

Preface

Digital Manufacturing and Assembly Systems in Industry 4.0

2019 | book

Preface

Biodegradable Composites: Materials, Manufacturing and Engineering

2019 | book

Preface

Mechanical Behavior of Biomaterials

2019 | book

Preface

Lecture Notes on Multidisciplinary Industrial Engineering

2019 | book

Preface

Lecture Notes on Multidisciplinary Industrial Engineering

2019 | book

Process Planning in Era 4.0

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Requirements of Education and Qualification

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Risk Management Implementation

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Socio-technical Considerations

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Special Issue on: 3D Printing and Additive Manufacturing

International Journal of Materials and Product Technology

2019 | journal-article

Special Issue on: Developments in Additive Manufacturing

International Journal of Materials and Product Technology

2019 | journal-article

Special issue on applied mathematical techniques in engineering applications and related topics-I

Nonlinear Studies

2019 | journal-article

Special issue on applied mathematical techniques in engineering applications and related topics-II

Nonlinear Studies

2019 | journal-article

Sustainable Business Scenarios in 4.0 Era

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Sustainable engineering products and manufacturing technologies

Sustainable Engineering Products and Manufacturing Technologies

2019 | book

Swarm intelligence-based methods

SpringerBriefs in Applied Sciences and Technology

2019 | book-chapter

Tool wear in dry helical milling for hole-making in AISI H13 hardened steel

International Journal of Advanced Manufacturing Technology

2019 | journal-article

Tribological behavior of pa66+mos2 and pa66gf30 under water lubrication

Journal of Manufacturing Technology Research

2019 | journal-article

Tribological characteristics of electroless NI-B-W-MO coatings under dry sliding condition

Journal of Manufacturing Technology Research

2019 | journal-article

Tribology of materials for biomedical applications

Mechanical Behaviour of Biomaterials

2019 | book-chapter

Tribology of materials for biomedical applications

Self-assembling Biomaterials: Molecular Design, Characterization and Application in Biology and Medicine

2019 | journal-article

Welding

Micro and Nano Machining of Engineering Materials: Recent Developments

2019 | journal-article

3D progressive damage based macro‑Mechanical FE simulation of machining unidirectional FRP composite

Chinese Journal of Mechanical Engineering (English Edition)

2018 | journal-article

A review on dry sliding wear behaviour of metal matrix composites

Wear of Composite Materials

2018 | book-chapter

Advanced applications in manufacturing enginering

Advanced Applications in Manufacturing Engineering

2018 | book

Advanced mathematical techniques in science and engineering

Advanced Mathematical Techniques in Science and Engineering

2018 | book

Advances in Measurement Science and Technology

International Journal of Materials and Product Technology

2018 | journal-article

Analysis and optimization of hole quality parameters in cenosphere-multiwall carbon nanotube hybrid composites drilling using artificial neural network and gravitational search technique

Drilling Technology: Fundamentals and Recent Advances

2018 | journal-article

Application of heuristic optimization towards optimal process parametersin advanced machining process

Journal of Manufacturing Technology Research

2018 | journal-article

Behaviour of a biocompatible titanium alloy during orthogonal micro-cutting employing green machining techniques

International Journal of Advanced Manufacturing Technology

2018 | journal-article

Comparative study of tribological behavior of electroless Ni-B, Ni-B-Mo, and Ni-B-W coatings at room and high temperatures

Lubricants

2018 | journal-article

Composites and Advanced Materials for Industrial Applications Preface

Sustainable Nanosystems Development, Properties, and Applications

2018 | journal-article

Composites and advanced materials for industrial applications

Composites and Advanced Materials for Industrial Applications

2018 | book

Corporate Social Responsibility in Management and Engineering Preface

Corporate Social Responsibility in Management and Engineering

2018 | journal-article

Corporate social responsibility in management and engineering

Corporate Social Responsibility in Management and Engineering

2018 | book

Design and Optimization of Mechanical Engineering Products Preface

Soft Computing Techniques and Applications in Mechanical Engineering

2018 | journal-article

Design and optimization of mechanical engineering products

Design and Optimization of Mechanical Engineering Products

2018 | book

Development of a comprehensive delamination assessment factor and its evaluation with high-speed drilling of composite laminates using a twist drill

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2018 | journal-article

Drilling Technology Fundamentals and Recent Advances Preface

Drilling Technology: Fundamentals and Recent Advances

2018 | journal-article

Drilling of composite materials: methods and tools

Drilling Technology: Fundamentals and Recent Advances

2018 | journal-article

Editorial

International Journal of Materials and Product Technology

2018 | journal-article

Editorial

International Journal of Surface Science and Engineering

2018 | journal-article

Effect of glass fiber reinforcement and the addition of MoS2 on the tribological behavior of PA66 under dry sliding conditions: A study of distribution of pixel intensity on the counterface

Wear of Composite Materials

2018 | book-chapter

Elevator System Analysis in Deliberation of Dependability, Cost Under Coverage, and Copula Approaches

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2018 | journal-article

Experimental investigation and optimization of PAC parameters on Monel 400™ superalloy

Materials and Manufacturing Processes

2018 | journal-article

Fabrication of functionally graded materials: A review

Hierarchical Composite Materials: Materials, Manufacturing, Engineering

2018 | book-chapter

Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness,tool wear,chip morphology and economic analysis

Journal of Manufacturing Technology Research

2018 | journal-article

Heat treatment effects on tribological characteristics for AISI A8 tool steel and development of wear mechanism maps using K means clustering and neural networks

Tribology - Materials, Surfaces and Interfaces

2018 | journal-article

Hierarchical Composite Materials: Materials, Manufacturing, Engineering

Hierarchical Composite Materials: Materials, Manufacturing, Engineering

2018 | book

History of Production and Industrial Engineering Through Contributions of Stalwarts

Manufacturing Engineering Education

2018 | book-chapter

Identification of Optimal Process Parameters in Electro-Discharge Machining Using ANN and PSO

Soft Computing Techniques and Applications in Mechanical Engineering

2018 | journal-article

Influence of cutting parameters on temperature in high speed drilling of GFRP composites

Journal of Manufacturing Technology Research

2018 | journal-article

Influence of sliding velocity on the tribological behavior of PA66GF30 and PA66 + MoS2: an analysis of morphology of sliding surface by digital image processing

Polymer Bulletin

2018 | journal-article

Investigation of margin effect to minimize delamination during drilling of differently stacked gfrp-aluminum fiber metal laminates (3/2 glare)

Journal of Manufacturing Technology Research

2018 | journal-article

Manufacturing Engineering Education

Manufacturing Engineering Education

2018 | book

Mechanical deburring and edge-finishing processes for aluminum parts—a review

International Journal of Advanced Manufacturing Technology

2018 | journal-article

Mechanical properties of bio compatible functional prototypes for joining applications in clinical dentistry

International Journal of Production Research

2018 | journal-article

Micro MBA: Theory and Practice

Micro MBA: Theory and Practice

2018 | book

Micro tool design and fabrication: A review

Journal of Manufacturing Processes

2018 | journal-article

Modeling and Simulation in Industrial Engineering Preface

Modeling and Simulation in Industrial Engineering

2018 | journal-article

Multivariate robust modeling and optimization of cutting forces of the helical milling process of the aluminum alloy Al 7075

International Journal of Advanced Manufacturing Technology

2018 | journal-article

Organizational Behaviour and Human Resource Management A Guide to a Specialized MBA Course Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2018 | journal-article

Preface

Design and Optimization of Mechanical Engineering Products

2018 | book

Preface

Wear of Composite Materials

2018 | book

Preface

Corporate Social Responsibility in Management and Engineering

2018 | book

Preface

Advanced Mathematical Techniques in Science and Engineering

2018 | book

Preface

Wear of Composite Materials

2018 | book

Preface

Design and Optimization of Mechanical Engineering Products

2018 | book

Preface

Manufacturing Engineering Education

2018 | book

Preface

Wear of Composite Materials

2018 | book

Preface

Manufacturing Engineering Education

2018 | book

Preface

Advanced Applications in Manufacturing Engineering

2018 | book

Preface

Wear of Composite Materials

2018 | book

Preface

Micro MBA: Theory and Practice

2018 | book

Preface

Advanced Applications in Manufacturing Engineering

2018 | book

Preface

Hierarchical Composite Materials: Materials, Manufacturing, Engineering

2018 | book

Progress in Lean Manufacturing Preface

Progress in Lean Manufacturing

2018 | journal-article

Soft Computing Techniques and Applications in Mechanical Engineering

Soft Computing Techniques and Applications in Mechanical Engineering

2018 | journal-article

Wear of composite materials

Wear of Composite Materials

2018 | book

A REVIEW ON EFFECTS OF CRYOGENIC TREATMENT OF AISI 'D' SERIES COLD WORKING TOOL STEELS

Reviews on Advanced Materials Science

2017 | journal-article

A review of helical milling process

International Journal of Machine Tools and Manufacture

2017 | journal-article

A review on effects of cryogenic treatment of AISI 'D' series cold working tool steels

Reviews on Advanced Materials Science

2017 | journal-article

Advanced machining processes: Innovative modeling techniques

Advanced Machining Processes: Innovative Modeling Techniques

2017 | book

Advances in Reliability and System Engineering Preface

Advances in Reliability and System Engineering

2017 | journal-article

Analysis and optimization of dry sliding wear parameters in cenosphere/epoxy composites

Journal of Manufacturing Technology Research

2017 | journal-article

Carbon fiber reinforced metal matrix composites: Fabrication processes and properties

Composites Part A: Applied Science and Manufacturing

2017 | journal-article

Computational Methods and Production Engineering Research and Development Preface

Computational Methods and Production Engineering: Research and Development

2017 | journal-article

Computational methods and production engineering: Research and development

Computational Methods and Production Engineering: Research and Development

2017 | book

Curricula for Sustainability in Higher Education Preface

Curricula for Sustainability in Higher Education

2017 | journal-article

Effect of geometry of tool pin profile on the mechanical and metallographic characteristics of friction stir welded AA 5052-H32 aluminium alloy

Journal of Manufacturing Technology Research

2017 | journal-article

Green and Lean Management Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2017 | journal-article

Higher Education Institutions in a Global Warming World The Transition of Higher Education Institutions to a Low Carbon Economy Preface

Higher Education Institutions in a Global Warming World: the Transition of Higher Education Institutions to a Low Carbon Economy

2017 | journal-article

Higher education institutions in a global warming world: The transition of higher education institutions to a low carbon economy

Higher Education Institutions in a Global Warming World: The Transition of Higher Education Institutions to a Low Carbon Economy

2017 | book

Initial shear strain development during formation of nanostructuredmetal chips (Retraction of Vol 24, 10.1179/174328407X243014, 2008)

Materials Science and Technology

2017 | journal-article

Laser Assisted Bending by Magnetic Force

Journal of Engineering-Joe

2017 | journal-article

Latest advances in the micro-milling of titanium alloys: a review

Procedia Manufacturing

2017 | conference-paper

Managing organizational diversity: Trends and challenges in management and engineering

Managing Organizational Diversity: Trends and Challenges in Management and Engineering

2017 | book

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics Preface

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2017 | journal-article

Mathematics Applied to Engineering Preface

Mathematics Applied to Engineering

2017 | journal-article

Mathematics applied to engineering

Mathematics Applied to Engineering

2017 | book

Microfabrication and Precision Engineering Research and Development Preface

MICROFABRICATION AND PRECISION ENGINEERING: RESEARCH AND DEVELOPMENT

2017 | journal-article

Microstructure and wear characterization of rice husk ash reinforced copper matrix composites prepared using friction stir processing

Journal of Alloys and Compounds

2017 | journal-article

Multi-objective robust optimization of the sustainable helical milling process of the aluminum alloy Al 7075 using the augmented-enhanced normalized normal constraint method

Journal of Cleaner Production

2017 | journal-article

Multiresponse optimization in wire electric discharge machining (WEDM) of HCHCr steel by integrating response surface methodology (RSM) with differential evolution (DE)

Computational Methods and Production Engineering: Research and Development

2017 | book-chapter

Multiresponse optimization in wire electric discharge machining (WEDM) of HCHCr steel by integrating response surface methodology (RSM) with differential evolution (DE)

Computational Methods and Production Engineering: Research and Development

2017 | journal-article

Non-traditional Micromachining Processes Fundamentals and Applications Preface

Micro and Nano Machining of Engineering Materials: Recent Developments

2017 | journal-article

Optimization of Process Parameters Using Soft Computing Techniques: A Case With Wire Electrical Discharge Machining

Handbook of Research on Soft Computing and Nature-inspired Algorithms

2017 | journal-article

Optimization of Process Parameters Using Taguchi Coupled Genetic Algorithm: Machining in CNC Lathe

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2017 | journal-article

Optimization of process parameters using soft computing techniques: A case with wire electrical discharge machining

Handbook of Research on Soft Computing and Nature-Inspired Algorithms

2017 | book-chapter

Preface

Managing Organizational Diversity: Trends and Challenges in Management and Engineering

2017 | book

Preface

Productivity and Organizational Management

2017 | book

Preface

Mathematics Applied to Engineering

2017 | book

Preface

Computational Methods and Production Engineering: Research and Development

2017 | book

Preface

Advanced Machining Processes: Innovative Modeling Techniques

2017 | book

Preface

Managing Organizational Diversity: Trends and Challenges in Management and Engineering

2017 | book

Preface

Advanced Machining Processes: Innovative Modeling Techniques

2017 | book

Preface

Higher Education Institutions in a Global Warming World: The Transition of Higher Education Institutions to a Low Carbon Economy

2017 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2017 | book

Preface

Mathematics Applied to Engineering

2017 | book

Preface

Mathematics Applied to Engineering

2017 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2017 | book

Preface

Journal of Manufacturing Technology Research

2017 | journal-article

Preparation and wear characterization of gfrp filled with granite particle laminate composites

Journal of Manufacturing Technology Research

2017 | journal-article

Productivity and organizational management

Productivity and Organizational Management

2017 | book

Robust weighting applied to optimization of AISI H13 hardened-steel turning process with ceramic wiper tool: A diversity-based approach

Precision Engineering

2017 | journal-article

Study Based on Sound Monitoring as a Means for Superficial Quality Control in Intermittent Turning of Magnesium Workpieces

Procedia CIRP

2017 | conference-paper

Surface Finish Coatings

Comprehensive Materials Finishing

2017 | book-chapter

Sustainable Machining Preface

Sustainable Machining

2017 | journal-article

2D macro-mechanical FE simulations for machining unidirectional FRP composite: The influence of damage models

Science and Engineering of Composite Materials

2016 | journal-article

Analysis of behaviour biocompatible titanium alloy (Ti-6Al-7Nb) in the micro-cutting

Measurement: Journal of the International Measurement Confederation

2016 | journal-article

Analysis of the hard turning of AISI H13 steel with ceramic tools based on tool geometry: surface roughness, tool wear and their relation

Journal of the Brazilian Society of Mechanical Sciences and Engineering

2016 | journal-article

Assessment of delamination in composite materials: A review

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2016 | journal-article

Ceramic matrix composites: Materials, manufacturing and engineering

Ceramic Matrix Composites: Materials, Manufacturing and Engineering

2016 | book

Challenges in Higher Education for Sustainability Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2016 | journal-article

Comparative study of the performance of diamond-coated drills on the delamination in drilling of carbon fiber reinforced plastics: Assessing the influence of the temperature of the drill

Journal of Composite Materials

2016 | journal-article

Computational Approaches to Materials Design: Theoretical and Practical Aspects Preface

Sustainable Nanosystems Development, Properties, and Applications

2016 | journal-article

Computational Materials Design: Different Concepts and Aspects

Sustainable Nanosystems Development, Properties, and Applications

2016 | journal-article

Computational materials design: Different concepts and aspects

Computational Approaches to Materials Design: Theoretical and Practical Aspects

2016 | book-chapter

Delamination of carbon fiber reinforced plastics: Analysis of the drilling method

Indian Journal of Engineering and Materials Sciences

2016 | journal-article

Design of Experiments in Production Engineering Preface

Design of Experiments in Production Engineering

2016 | journal-article

Design of Experiments-Statistical and Artificial Intelligence Analysis for the Improvement of Machining Processes: A Review

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2016 | journal-article

Ecotribology Research Developments Preface

Ecotribology: Research Developments

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Editorial

International Journal of Manufacturing Technology and Management

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Editorial

Journal of Manufacturing Technology Research

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Editorial

International Journal of Machining and Machinability of Materials

2016 | journal-article

Estimation of Mechanical and Tribological Properties of Epoxy-Based Green Composites

Sustainable Nanosystems Development, Properties, and Applications

2016 | journal-article

Estimation of mechanical and tribological properties of epoxy-based green composites

Green Approaches to Biocomposite Materials Science and Engineering

2016 | book-chapter

Examination and modification of equivalent delamination factor for assessment of high speed drilling

Journal of Mechanical Science and Technology

2016 | journal-article

Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB2 hybrid aluminum composites synthesized by friction stir processing

Materials and Design

2016 | journal-article

MBA Theory and Application of Business and Management Principles Preface

Managing Innovation in Highly Restrictive Environments: Lessons from Latin America and Emerging Markets

2016 | journal-article

Management for sustainable development

Management for Sustainable Development

2016 | book

Mathematical concepts and applications in mechanical engineering and mechatronics

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2016 | book

Metal Cutting Technologies Progress and Current Trends Preface

Metal Cutting Technologies: Progress and Current Trends

2016 | journal-article

Metal cutting technologies: Progress and current trends

Metal Cutting Technologies: Progress and Current Trends

2016 | book

Microfabrication and precision engineering: Research and development

Microfabrication and Precision Engineering: Research and Development

2016 | book

Modeling and optimization in tribological parameters of polyether ether ketone matrix composites using D-optimal design

Journal of Thermoplastic Composite Materials

2016 | journal-article

Multi-objective Optimization of Engine Parameters While Bio-lubricant-Biofuel Combination of VCR Engine Using Taguchi-Grey Approach

Micro and Nano Machining of Engineering Materials: Recent Developments

2016 | journal-article

Optimization of process parameters using taguchi coupled genetic algorithm: Machining in CNC lathe

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2016 | book-chapter

Organizational management: Policies and practices in a global market

Organizational Management: Policies and Practices in a Global Market

2016 | book

Parametric design optimization of hard turning of AISI 4340 steel (69 HRC)

International Journal of Advanced Manufacturing Technology

2016 | journal-article

Preface

Metal Cutting Technologies: Progress and Current Trends

2016 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2016 | book

Preface

Computational Approaches to Materials Design: Theoretical and Practical Aspects

2016 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2016 | book

Preface

Computational Approaches to Materials Design: Theoretical and Practical Aspects

2016 | book

Preface

Ceramic Matrix Composites: Materials, Manufacturing and Engineering

2016 | book

Preface

Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics

2016 | book

Preface

Management for Sustainable Development

2016 | book

Preface

Microfabrication and Precision Engineering: Research and Development

2016 | book

Preface

Materials Forming and Machining: Research and Development

2016 | book

Preface

Ceramic Matrix Composites: Materials, Manufacturing and Engineering

2016 | book

Preface

Ceramic Matrix Composites: Materials, Manufacturing and Engineering

2016 | book

Preface

Materials Forming and Machining: Research and Development

2016 | book

Preface

Metal Cutting Technologies: Progress and Current Trends

2016 | book

Recent developments in sustainable manufacturing of gears: A review

Journal of Cleaner Production

2016 | journal-article

Surface Roughness Investigation in the Hard Turning of Steel Using Ceramic Tools

Materials and Manufacturing Processes

2016 | journal-article

The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals

Measurement: Journal of the International Measurement Confederation

2016 | journal-article

Woodhead Publishing in Mechanical Engineering Materials Forming and Machining Research and Development Preface

MATERIALS FORMING AND MACHINING: RESEARCH AND DEVELOPMENT

2016 | journal-article

A note on the use of the minimum quantity lubrication (MQL) system in turning

Industrial Lubrication and Tribology

2015 | journal-article

A review on investigations in drilling of fiber reinforced plastics

Machinability of Fibre-Reinforced Plastics

2015 | book-chapter

Analysis of ignition risk in intermittent turning of UNS M11917 magnesium alloy at low cutting speeds based on the chip morphology

Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture

2015 | journal-article

Delamination in composite materials: Measurement, assessment and prediction

Machinability of Fibre-Reinforced Plastics

2015 | book-chapter

Design-of-experiments application in machining titanium alloys for aerospace structural components

Measurement: Journal of the International Measurement Confederation

2015 | journal-article

Drilling of high impact polystyrene composites materials

Machinability of Fibre-Reinforced Plastics

2015 | book-chapter

Fabrication of experimental set-up and testing

SpringerBriefs in Applied Sciences and Technology

2015 | book

Finite Element Method in Machining Processes: A Review

Micro and Nano Machining of Engineering Materials: Recent Developments

2015 | journal-article

Fundamentals of machining

Machining with Nanomaterials: Second Edition

2015 | book-chapter

Fundamentals of machining

Machining with Nanomaterials: Second Edition

2015 | book

Gamification in engineering education and professional training

International Journal of Mechanical Engineering Education

2015 | journal-article

Human resource management challenges and changes

Human Resource Management Challenges and Changes

2015 | book

Innovation Management In Research and Industry Preface

Innovation Management: in Research and Industry

2015 | journal-article

Innovation management: In research and industry

Innovation Management: In Research and Industry

2015 | book

Introduction

SpringerBriefs in Applied Sciences and Technology

2015 | book

Literature review

SpringerBriefs in Applied Sciences and Technology

2015 | book

Lubrication Aspects during Single Point Incremental Forming for Steel and Aluminum Materials

International Journal of Precision Engineering and Manufacturing

2015 | journal-article

Machinability of fibre-reinforced plastics

Machinability of Fibre-Reinforced Plastics

2015 | book

Machinability of fibre-reinforced plastics

Machinability of Fibre-Reinforced Plastics

2015 | book

Machinability of metal matrix composites

SpringerBriefs in Applied Sciences and Technology

2015 | book

Machining and Machining Modeling of Metal Matrix Composites-A Review

Micro and Nano Machining of Engineering Materials: Recent Developments

2015 | journal-article

Machining of brittle materials using nanostructured diamond tools

Machining with Nanomaterials: Second Edition

2015 | book-chapter

Machining of brittle materials using nanostructured diamond tools

Machining with Nanomaterials: Second Edition

2015 | book

Manufacturing engineering: New research

Manufacturing Engineering: New Research

2015 | book

Manufacturing engineering: New research

Manufacturing Engineering: New Research

2015 | book

Materials Forming and Machining: Research and Development

Materials Forming and Machining: Research and Development

2015 | book

Materials Forming and Machining: Research and Development

Materials Forming and Machining: Research and Development

2015 | book

Metal matrix composites: Synthesis, wear characteristics, machinability study of MMC brake drum

SpringerBriefs in Applied Sciences and Technology

2015 | book

Modern Manufacturing Engineering Preface

Modern Manufacturing Engineering

2015 | journal-article

Multiple performance optimization in drilling using Taguchi method with utility and modified utility concepts

Materials Forming and Machining: Research and Development

2015 | book-chapter

Multiple performance optimization in drilling using Taguchi method with utility and modified utility concepts

Materials Forming and Machining: Research and Development

2015 | book

Preface

Materials Forming and Machining: Research and Development

2015 | book

Preface

Sustainability in Higher Education

2015 | book

Preface

Machinability of Fibre-Reinforced Plastics

2015 | book

Preface

Processing Techniques and Tribological Behavior of Composite Materials

2015 | book

Preface

Manufacturing Engineering: New Research

2015 | book

Preface

Research Advances in Industrial Engineering

2015 | book

Preface

Human Resource Management Challenges and Changes

2015 | book

Preface

Innovation Management: In Research and Industry

2015 | book

Preface

Manufacturing Engineering: New Research

2015 | book

Preface

Processing Techniques and Tribological Behavior of Composite Materials

2015 | book

Preface

Human Resource Management Challenges and Changes

2015 | book

Preface

Machinability of Fibre-Reinforced Plastics

2015 | book

Preface

Thermal Sprayed Coatings and Their Tribological Performances

2015 | book

Preface

Thermal Sprayed Coatings and Their Tribological Performances

2015 | book

Preface

Innovation Management: In Research and Industry

2015 | book

Preface

Manufacturing Engineering: New Research

2015 | book

Preface

Thermal Sprayed Coatings and their Tribological Performances

2015 | book

Preface

Materials Forming and Machining: Research and Development

2015 | book

Preface

Research Advances in Industrial Engineering

2015 | book

Preface

Sustainability in Higher Education

2015 | book

Preface

Materials Forming and Machining: Research and Development

2015 | book

Processing techniques and tribological behavior of composite materials

Processing Techniques and Tribological Behavior of Composite Materials

2015 | book

Quality in the machining: Characteristics and techniques to obtain good results

Manufacturing Engineering: New Research

2015 | book-chapter

Specific cutting energy employed to study the influence of the grain size in the micro-milling of the hardened AISI H13 steel

International Journal of Advanced Manufacturing Technology

2015 | journal-article

Surface integrity in the micromachining: A review

Reviews on Advanced Materials Science

2015 | journal-article

Sustainability in Higher Education

Sustainability in Higher Education

2015 | book

Sustainability in Higher Education

Sustainability in Higher Education

2015 | book

Synthesis of metal matrix composites

SpringerBriefs in Applied Sciences and Technology

2015 | book

Thermal sprayed coatings and their tribological performances

Thermal Sprayed Coatings and their Tribological Performances

2015 | book

Wear analysis

SpringerBriefs in Applied Sciences and Technology

2015 | book

An Investigation of Ductile Regime Machining of Silicon Nitride Ceramics

Machinability of Advanced Materials

2014 | journal-article

DISCONTINUOUS CUTTING: FAILURE MECHANISMS, TOOL MATERIALS AND TEMPERATURE STUDY - A REVIEW

Reviews on Advanced Materials Science

2014 | journal-article

Design and selection of chemically deposited Ni-P-W coatings for optimum tribological behavior

Surface Engineering Techniques and Applications: Research Advancements

2014 | book-chapter

Discontinuous cutting: Failure mechanisms, tool materials and temperature study - A review

Reviews on Advanced Materials Science

2014 | journal-article

Editorial

International Journal of Manufacturing Technology and Management

2014 | journal-article

Effects of Alloying Elements on the Machinability of Near-Eutectic Al-Si Casting Alloys

Machinability of Advanced Materials

2014 | journal-article

Engineering Education: Curriculum, Pedagogy and Didactic Aspects

Engineering Education: Curriculum, Pedagogy and Didactic Aspects

2014 | book

Experimental investigation on finish intermittent turning of UNS M11917 magnesium alloy under dry machining

International Journal of Advanced Manufacturing Technology

2014 | journal-article

Experimental investigation on surface finish during intermittent turning of UNS M11917 magnesium alloy under dry and near dry machining conditions

Measurement

2014 | journal-article

Experimental studies on hole quality and machinability characteristics in drilling of unreinforced and reinforced polyamides

Journal of Composite Materials

2014 | journal-article

Handbook of Research on Nanoscience, Nanotechnology, and Advanced Materials Preface

Sustainable Nanosystems Development, Properties, and Applications

2014 | journal-article

Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation

International Journal of Advanced Manufacturing Technology

2014 | journal-article

Hybrid modeling and multi-objective optimization of mechanical manufacturing processes,MODELACIÓN HÍBRIDA Y OPTIMIZACIÓN MULTIOBJETIVO DE PROCESOS DE MANUFACTURA MECÁNICA

Anales de la Academia de Ciencias de Cuba

2014 | journal-article

Laser Applications in the Field of Plastics

Comprehensive Materials Processing

2014 | book-chapter

Machinability of Advanced Materials

Machinability of Advanced Materials

2014 | book

Machinability of Advanced Materials Preface

Machinability of Advanced Materials

2014 | journal-article

Machinability of Titanium and Its Alloys

Machinability of Advanced Materials

2014 | journal-article

Machinability: Existing and Advanced Concepts

Machinability of Advanced Materials

2014 | journal-article

Machining Behavior of Polymer Composites Materials for Automotive Applications

Polimeros-Ciencia E Tecnologia

2014 | journal-article

Machining of Titanium Alloys Preface

Machining of Titanium Alloys

2014 | journal-article

Metal matrix composites: Materials, manufacturing and engineering

Metal Matrix Composites: Materials, Manufacturing and Engineering

2014 | book

Milling Burr Formation and Avoidance

Machinability of Advanced Materials

2014 | journal-article

Modeling and Optimization of Mechanical Systems and Processes

Micro and Nano Machining of Engineering Materials: Recent Developments

2014 | journal-article

Modern Mechanical Engineering preface

Modern Mechanical Engineering: Research, Development and Education

2014 | journal-article

Monitoring and processing signal applied in machining processes - A review

Measurement

2014 | journal-article

Nanotechnology applications for improvements in energy efficiency and environmental management

Nanotechnology Applications for Improvements in Energy Efficiency and Environmental Management

2014 | book

Preface

Machinability of Advanced Materials

2014 | book

Preface

Transfer and Management of Knowledge

2014 | book

Preface

Handbook of Research on Nanoscience, Nanotechnology, and Advanced Materials

2014 | book

Preface

Surface Engineering Techniques and Applications: Research Advancements

2014 | book

Preface

Engineering Education: Curriculum, Pedagogy and Didactic Aspects

2014 | book

Preface

Engineering Education: Curriculum, Pedagogy and Didactic Aspects

2014 | book

Preface

Metal Matrix Composites: Materials, Manufacturing and Engineering

2014 | book

Sicp-Reinforced Al6063 MMCs: mechanical behavior and microstructural analysis

Lecture Notes in Mechanical Engineering

2014 | book-chapter

Taylor's model based analysis of turning inserts tool-life in the dry turning of UNS R56400 alloy

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

2014 | conference-paper

The Machinability of Hard Materials - A Review

Machinability of Advanced Materials

2014 | book-chapter

The Machinability of Hard Materials - A Review

Machinability of Advanced Materials

2014 | journal-article

Transfer and Management of Knowledge

Transfer and Management of Knowledge

2014 | book

Application of artificial neural network for the prediction of surface roughness in drilling GFRP composites

Materials Science Forum

2013 | book

Behavior of composite laminates with drilled and moulded hole under tensile load

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Biomaterials and Medical Tribology: Research and Development

Biomaterials and Medical Tribology: Research and Development

2013 | book

Biomedical composites: Materials, manufacturing and engineering

Biomedical Composites: Materials, Manufacturing and Engineering

2013 | book

Biotribology

Biotribology

2013 | journal-article

Challenges in drilling of multi-materials

Materials Science Forum

2013 | book

Drilling of composites

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Drilling of polymer-matrix composites

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Editorial

International Journal of Materials and Product Technology

2013 | journal-article

Effect of B4C on mechanical properties and tribological behaviour of AA 6061-B4C composites

Journal of the Balkan Tribological Association

2013 | journal-article

Effects of drill points while drilling at high spindle speed

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Effects of drill points while drilling of composites

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Effects of drilling parameters on mechanical strength

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Electrical discharge machining: Study on machining characteristics of WC/Co composites

Machining and Machine-Tools: Research and Development

2013 | book-chapter

Experimental delamination analyses of CFRPs using different drill geometries

Composites Part B: Engineering

2013 | journal-article

Functional Nanomaterials for Energy and Environmental Applications Preface

Thermec: International Conference on Processing and Manufacturing of Advanced Materials

2013 | journal-article

Fuzzy modeling and analysis on the turning parameters for machining force and specific cutting pressure in CFRP composites

Materials Science Forum

2013 | book

Industrial Engineering: Concepts, Methodologies, Tools and Applications

International Journal of Manufacturing, Materials, and Mechanical Engineering

2013 | journal-article

Influence of graphite particles on surface roughness and chip formation studies in turning metal matrix composites

Materials Research

2013 | journal-article

Interdisciplinary Mechatronics Engineering Science and Research Development Preface

Interdisciplinary Mechatronics: Engineering Science and Research Development

2013 | journal-article

Interdisciplinary Mechatronics: Engineering Science and Research Development

Interdisciplinary Mechatronics: Engineering Science and Research Development

2013 | journal-article

Introduction

SpringerBriefs in Applied Sciences and Technology

2013 | book

Investigations on the drilling process of unreinforced and reinforced polyamides using Taguchi method

Composites Part B: Engineering

2013 | journal-article

Lasers in Manufacturing

Lasers in Manufacturing

2013 | book

MODELING AND OPTIMIZATION TECHNIQUES IN MACHINING OF HARDENED STEELS: A BRIEF REVIEW

Reviews on Advanced Materials Science

2013 | journal-article

Machining and machine-tools: Research and development

Machining and Machine-Tools: Research and Development

2013 | book

Machining of Titanium Alloys and Composites for Aerospace Applications Preface

Thermec: International Conference on Processing and Manufacturing of Advanced Materials

2013 | journal-article

Management and Engineering Innovation

Management and Engineering Innovation

2013 | book

Management and Engineering Innovation Preface

Management and Engineering Innovation

2013 | journal-article

Mechanical Engineering Education

Mechanical Engineering Education

2013 | book

Mechatronics

Mechatronics

2013 | journal-article

Micromanufacturing Processes

International Journal of Manufacturing, Materials, and Mechanical Engineering

2013 | journal-article

Minimum Quantity Lubrication in Machining

Sustainable Manufacturing

2013 | book-chapter

Minimum Quantity Lubrication in Machining

Sustainable Manufacturing

2013 | journal-article

Modeling and optimization techniques in machining of hardened steels: A brief review

Reviews on Advanced Materials Science

2013 | journal-article

Multi-response optimization in drilling of glass epoxy polymer composites using simulated annealing approach

Materials Science Forum

2013 | book

Nanocomposites Materials, Manufacturing and Engineering Preface

Nanocomposites: Materials, Manufacturing and Engineering

2013 | journal-article

Nanocomposites: Materials, manufacturing and engineering

Nanocomposites: Materials, Manufacturing and Engineering

2013 | book

Nontraditional machining processes: Research advances

Nontraditional Machining Processes: Research Advances

2013 | book

Numerical prediction of the critical thrust force causing delamination at the hole exit

SpringerBriefs in Applied Sciences and Technology

2013 | book-chapter

Prediction of cutting forces during turning PA66 GF-30 glass fiber reinforced polyamide by soft computing techniques

Materials Science Forum

2013 | book

Preface

Nanocomposites: Materials, Manufacturing and Engineering

2013 | book

Preface

Materials Science Forum

2013 | book

Preface

Statistical and Computational Techniques in Manufacturing

2013 | book

Preface

Machining and Machine-Tools: Research and Development

2013 | book

Preface

Research Developments in Wood Engineering and Technology

2013 | book

Preface

Wear of Advanced Materials

2013 | book

Preface

Biomaterials and Medical Tribology: Research and Development

2013 | book

Preface

Wood Machining

2013 | book

Preface

Engineering Creative Design in Robotics and Mechatronics

2013 | book

Preface

Management and Engineering Innovation

2013 | book

Preface

Research Developments in Wood Engineering and Technology

2013 | book

Preface

Interdisciplinary Mechatronics: Engineering Science and Research Development

2013 | book

Preface

Mechanical Engineering Education

2013 | book

Preface

Biotribology

2013 | book

Preface

Nontraditional Machining Processes: Research Advances

2013 | book

Preface

Lasers in Manufacturing

2013 | book

Preface

Mechatronics

2013 | book

Preface

Biomedical Composites: Materials, Manufacturing and Engineering

2013 | book

Preface

Research Developments in Wood Engineering and Technology

2013 | book

Preface

Nanocomposites: Materials, Manufacturing and Engineering

2013 | book

REVIEW ON MACHINABILITY OF TITANIUM ALLOYS: THE PROCESS PERSPECTIVE

Reviews on Advanced Materials Science

2013 | journal-article

Review on machinability of titanium alloys: The process perspective

Reviews on Advanced Materials Science

2013 | journal-article

Role of carbon nanotubes (CNTs) in improving wear properties of polypropylene (PP) in dry sliding condition

Materials and Design

2013 | journal-article

SPECIAL ISSUE: ADVANCES IN MACHINING PROCESSES

International Journal of Materials and Product Technology

2013 | journal-article

Soft Computing Techniques for Machining of Composites Preface

Thermec: International Conference on Processing and Manufacturing of Advanced Materials

2013 | journal-article

State-of-the-art research in machinability of hardened steels

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2013 | journal-article

Surface roughness minimization in turning PEEK-CF30 composites with TiN cutting tools using particle swarm optimization

Materials Science Forum

2013 | book

Sustainable Manufacturing

Sustainable Manufacturing

2013 | book

Thermomechanical behavior in orthogonal micro-turning of AISI 1045 steel (Ck45 - DIN): Finite element method simulation and experimental validation,Comportamento termo mecânico no micro-torneamento ortogonal do aço AISI 1045 (Ck45 - DIN): Simulação via elementos finitos e validação experimental

Ciencia e Tecnologia dos Materiais

2013 | journal-article

Tribology of ceramics and ceramic matrix composites

Tribology for Scientists and Engineers: From Basics to Advanced Concepts

2013 | book-chapter

A BRIEF REVIEW ON MICROMACHINING OF MATERIALS

Reviews on Advanced Materials Science

2012 | journal-article

A brief review on micromachining of materials

Reviews on Advanced Materials Science

2012 | journal-article

A detailed comparison of dry and air-cooled turning

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Acknowledgment

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book

Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites

Journal of Materials Science and Technology

2012 | journal-article

Analysis on drilling of glass fiber-reinforced polymer (GFRP) composites using grey relational analysis

Materials and Manufacturing Processes

2012 | journal-article

Application of Particle Swarm Optimization for Achieving Desired Surface Roughness in Tungsten-Copper Alloy Machining

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book-chapter

Application of Taguchi Method with Grey Fuzzy Logic for the Optimization of Machining Parameters in Machining Composites

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book-chapter

Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics

Measurement: Journal of the International Measurement Confederation

2012 | journal-article

Artificial intelligence tools

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Case of study

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Computational Methods and Optimization in Machining of Metal Matrix Composites

Machining of Metal Matrix Composites

2012 | journal-article

Computational Methods for Optimizing Manufacturing Technology: Models and Techniques

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book

Computational methods and optimization in machining of metal matrix composites

Machining of Metal Matrix Composites

2012 | book-chapter

Drilling of Metal matrix composites: A brief overview

Metal Matrix Composites

2012 | book-chapter

Drilling of glass fiber/vinyl ester composites with fillers

Materials and Manufacturing Processes

2012 | journal-article

Dry machining

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Dynamic Methods and Process Advancements in Mechanical, Manufacturing, and Materials Engineering

Dynamic Methods and Process Advancements in Mechanical Manufacturing and Materials Engineering

2012 | book

Economics of environmentally friendly machining

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Editorial

International Journal of Materials and Product Technology

2012 | journal-article

Environmentally Friendly Machining

2012 | book

Epilogue: Looking at the future

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Finite element in manufacturing processes

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Gas-cooled machining

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Green manufacturing

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Influence of lubrication on machinability of sintering Tungsten/Copper composite (WCu25),Influência da lubrificação na maquinabilidade do compósito Tungsténio/Cobre sinterizado (WCu25)

Ingeniare

2012 | journal-article

Introduction

SpringerBriefs in Applied Sciences and Technology

2012 | book

MICRO MILLING OF METALLIC MATERIALS - A BRIEF OVERVIEW

Transactions of Famena

2012 | journal-article

Machinability study of steels in precision orthogonal cutting

Materials Research

2012 | journal-article

Machining of complex sculptured surfaces

Machining of Complex Sculptured Surfaces

2012 | book

Machining of metal matrix composites

Machining of Metal Matrix Composites

2012 | book

Machining with minimal cutting fluid

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Materials and surface engineering Research and development Preface

Materials and Surface Engineering: Research and Development

2012 | journal-article

Materials and surface engineering: Research and development

Materials and Surface Engineering: Research and Development

2012 | book

Mechatronics and Manufacturing Engineering: Research and Development

Mechatronics and Manufacturing Engineering: Research and Development

2012 | book

Mechatronics and intelligent manufacturing

Mechatronics and Intelligent Manufacturing

2012 | book

Mechatronics and manufacturing engineering Research and development Preface

Mechatronics and Manufacturing Engineering: Research and Development

2012 | journal-article

Metal matrix composites

Metal Matrix Composites

2012 | book

Micro milling of metallic materials - A brief overview

Transactions of Famena

2012 | journal-article

Minimising burr size in drilling: Integrating response surface methodology with particle swarm optimisation

Mechatronics and Manufacturing Engineering: Research and Development

2012 | book-chapter

Minimising burr size in drilling: integrating response surface methodology with particle swarm optimisation

Mechatronics and Manufacturing Engineering: Research and Development

2012 | journal-article

Nanocomposite coatings: A review

Materials and Surface Engineering Research and Development

2012 | book-chapter

Nanocomposite coatings: A review

Materials and Surface Engineering: Research and Development

2012 | book-chapter

Nanocomposite coatings: A review

Materials and Surface Engineering: Research and Development

2012 | journal-article

Offline and online optimization of machining processes

SpringerBriefs in Applied Sciences and Technology

2012 | book-chapter

Optimal mql and cutting conditions determination for desired surface roughness in turning of brass using genetic algorithms

Machining Science and Technology

2012 | journal-article

Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates

Composites Part B: Engineering

2012 | journal-article

Optimization of machining parameters for multiple performances in drilling hybrid composites using desirability-based approach

Metal Matrix Composites

2012 | book-chapter

PROPERTIES AND APPLICATIONS OF TITANIUM ALLOYS: A BRIEF REVIEW

Reviews on Advanced Materials Science

2012 | journal-article

Preface

Dynamic Methods and Process Advancements in Mechanical Manufacturing and Materials Engineering

2012 | book

Preface

Computational Methods for Optimizing Manufacturing Technology Models and Techniques

2012 | book

Preface

Mechatronics and Intelligent Manufacturing

2012 | book

Preface

Metal Matrix Composites

2012 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2012 | book

Preface

The Design and Manufacture of Medical Devices

2012 | book

Preface

Mechatronics and Manufacturing Engineering: Research and Development

2012 | book

Preface

Materials and Surface Engineering: Research and Development

2012 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2012 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2012 | book

Preface

SpringerBriefs in Applied Sciences and Technology

2012 | book

Preface

Materials and Surface Engineering: Research and Development

2012 | book

Preface

Machining of Metal Matrix Composites

2012 | book

Preface

Machining of Complex Sculptured Surfaces

2012 | book

Properties and applications of titanium alloys: A brief review

Reviews on Advanced Materials Science

2012 | journal-article

RESIDUAL STRESSES IN MACHINING USING FEM ANALYSIS - A REVIEW

Reviews on Advanced Materials Science

2012 | journal-article

Residual stresses in machining using FEM analysis - A review

Reviews on Advanced Materials Science

2012 | journal-article

Single and multi-objective optimization methodologies in CNC machining

Statistical and Computational Techniques in Manufacturing

2012 | book-chapter

Special Issue on Developments in Machining Technology

International Journal of Materials and Product Technology

2012 | journal-article

State of the Art on Micromilling of Materials, a Review

Journal of Materials Science and Technology

2012 | journal-article

Surface roughness analysis in high-speed drilling of unreinforced and reinforced polyamides

Journal of Composite Materials

2012 | journal-article

THE ROLE OF FLOW STRESS AND FRICTION COEFFICIENT IN FEM ANALYSIS OF MACHINING: A REVIEW

Reviews on Advanced Materials Science

2012 | journal-article

The Design and Manufacture of Medical Devices

The Design and Manufacture of Medical Devices

2012 | book

The design and manufacture of medical devices Preface

Design and Manufacture of Medical Devices

2012 | journal-article

The role of flow stress and friction coefficient in fem analysis of machining: A review

Reviews on Advanced Materials Science

2012 | journal-article

Thermo-mechanical behavior in the micromachining of the AISI 4140: Numerical simulation with experimental validation,Comportamento termomecânico na microusinagem do AÇO AISI 4140: Simulação numérica com validação experimental

Ciencia y Engenharia/ Science and Engineering Journal

2012 | journal-article

Tool wear in machining processes for composites

Machining Technology for Composite Materials: Principles and Practice

2012 | journal-article

A study aimed at minimizing delamination during drilling of CFRP composites

Journal of Composite Materials

2011 | journal-article

Computational Methods and Optimization

Machining of Hard Materials

2011 | journal-article

Computational methods and optimization

Machining of Hard Materials

2011 | book-chapter

Effects of high speed in the drilling of glass whisker-reinforced polyamide composites (PA66 GF30): Statistical analysis of the roughness parameters

Journal of Composite Materials

2011 | journal-article

Fractal analysis in CNC end milling

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fractal analysis in CNC turning

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fractal analysis in EDM

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fractal analysis in cylindrical grinding

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fundamental consideration

SpringerBriefs in Applied Sciences and Technology

2011 | book-chapter

Fuzzy set-based set-up planning system with the ability for online learningg

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2011 | journal-article

Incorporation of material behavior in modeling of metal forming and machining processes: A review

Materials and Design

2011 | journal-article

Laser cladding: An overview

Laser Beams: Theory, Properties and Applications

2011 | book-chapter

Machining of hard materials

Machining of Hard Materials

2011 | book

Machining with abrasives

Machining with Abrasives

2011 | book

Manufacturing technology research

Manufacturing Technology Research

2011 | book

Mechatronics Preface

Mechatronics

2011 | journal-article

Modern machining technology A practical guide Preface

Modern Machining Technology: a Practical Guide

2011 | journal-article

Modern machining technology: A practical guide

Modern Machining Technology: A Practical Guide

2011 | book

Nanogrinding

Machining with Abrasives

2011 | book-chapter

Nanogrinding

Machining with Abrasives

2011 | journal-article

Performance comparison of conventional and wiper ceramic inserts in hard turning through artificial neural network modeling

International Journal of Advanced Manufacturing Technology

2011 | journal-article

Physical thermomechanical behavior in machining an aluminium alloy (7075-o) using polycrystalline diamond tool

Materials and Manufacturing Processes

2011 | journal-article

Preface

Machining of Hard Materials

2011 | book

Preface

Machining with Abrasives

2011 | book

Preface

Tribology for Engineers: A Practical Guide

2011 | book

Preface

Manufacturing Technology Research

2011 | book

Role of powder in the machining of Al-10%Sicp metal matrix composites by powder mixed electric discharge machining

Journal of Composite Materials

2011 | journal-article

SPECIAL ISSUE: NANOINDENTATION AND NANOTRIBOLOGY

International Journal of Surface Science and Engineering

2011 | journal-article

Surface Integrity

Machining of Hard Materials

2011 | journal-article

Surface integrity

Machining of Hard Materials

2011 | book-chapter

Surface roughness measurement in turning carbon steel AISI 1045 using wiper inserts

Measurement: Journal of the International Measurement Confederation

2011 | journal-article

Tool wear in machining processes for composites

Machining Technology for Composite Materials: Principles and Practice

2011 | book-chapter

Tribology for Engineers A practical guide Preface

Tribology for Engineers: a Practical Guide

2011 | journal-article

Tribology for Engineers: A Practical Guide

Tribology for Engineers: A Practical Guide

2011 | book

Tribology for engineers: A practical guide

Tribology for Engineers: A Practical Guide

2011 | book

A STUDY ON SURFACE QUALITY IN MICROMILLING

Micro and Nanomanufacturing Research

2010 | journal-article

A surface roughness analysis in turning of Polyamide PA-6 using statistical techniques

International Journal of Materials and Product Technology

2010 | journal-article

A surface roughness analysis in turning of polyamide PA-6 using statistical techniques

International Journal of Materials and Product Technology

2010 | journal-article

APPLICATION OF FUZZY LOGIC IN MANUFACTURING: A STUDY ON MODELING OF CUTTING FORCE IN TURNING GFRP COMPOSITES

Artificial Intelligence in Manufacturing Research

2010 | journal-article

Analysis and optimisation of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool

International Journal of Materials and Product Technology

2010 | journal-article

Analysis and optimisation of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool

International Journal of Materials and Product Technology

2010 | journal-article

Computational analysis of the intimate contact between an inclined wedge and low carbon steel during metal cutting

International Journal of Materials and Product Technology

2010 | journal-article

Computational analysis of the intimate contact between an inclined wedge and low carbon steel during metal cutting

International Journal of Materials and Product Technology

2010 | journal-article

Determination of optimum amount lubricant in drilling using soft-computing tools: Desired surface roughness

International Journal of Materials and Product Technology

2010 | journal-article

Determination of optimum amount lubricant in drilling using soft-computing tools: desired surface roughness

International Journal of Materials and Product Technology

2010 | journal-article

Economic machining analysis of using coated cutting tools machining M42 tool steel at unusually low cutting speeds

International Journal of Computational Materials Science and Surface Engineering

2010 | journal-article

Editorial: A brief overview of artificial intelligence applications in machining

International Journal of Machining and Machinability of Materials

2010 | journal-article

FEM machining analysis: Influence of rake angle in cutting of aluminium alloys using Polycrystalline Diamond cutting tools

International Journal of Materials and Product Technology

2010 | journal-article

FEM machining analysis: influence of rake angle in cutting of aluminium alloys using Polycrystalline Diamond cutting tools

International Journal of Materials and Product Technology

2010 | journal-article

FINITE ELEMENT MODELLING OF MACHINING ALUMINIUM ALLOY (AL 7075) AND EXPERIMENTAL VALIDATION

Metal Cutting: Research Advances

2010 | journal-article

Finite element modelling of machining aluminium alloy (Al 7075) and experimental validation

Metal Cutting: Research Advances

2010 | book-chapter

Finite element modelling of machining of AISI 316 steel: Numerical simulation and experimental validation

Simulation Modelling Practice and Theory

2010 | journal-article

Finite element simulation and experimental analysis of orthogonal cutting of an aluminium alloy using Polycrystalline Diamond tools

International Journal of Materials and Product Technology

2010 | journal-article

Finite element simulation and experimental analysis of orthogonal cutting of an aluminium alloy using polycrystalline diamond tools

International Journal of Materials and Product Technology

2010 | journal-article

MODELING AND ANALYSIS ON WEAR BEHAVIOUR OF METAL MATRIX COMPOSITES

Tribology of Composite Materials

2010 | journal-article

MULTI-OBJECTIVE OPTIMISATION OF CUTTING PARAMETERS FOR DRILLING ALUMINIUM AA1050

Artificial Intelligence in Manufacturing Research

2010 | journal-article

Machinability analysis in turning tungsten-copper composite for application in EDM electrodes

International Journal of Refractory Metals and Hard Materials

2010 | journal-article

Machinability evaluation in unreinforced and reinforced PEEK composites using response surface models

Journal of Thermoplastic Composite Materials

2010 | journal-article

Machinability evaluation in unreinforced and reinforced PEEK composites using response surface models

Journal of Thermoplastic Composite Materials

2010 | journal-article

Machinability study in turning of unreinforced (PA6) and reinforced (PA66 GF30) polyamides with Polycrystalline Diamond (PCD) tools

International Journal of Materials and Product Technology

2010 | journal-article

Machinability study in turning of unreinforced (PA6) and reinforced (PA66 GF30) polyamides with Polycrystalline Diamond (PCD) tools

International Journal of Materials and Product Technology

2010 | journal-article

Metal cutting: Research advances

Metal Cutting: Research Advances

2010 | book

Modeling and analysis of machinability characteristics in PA6 and PA66 GF30 polyamides through artificial neural network

Journal of Thermoplastic Composite Materials

2010 | journal-article

Multiobjective optimization of grinding process parameters using particle swarm optimization algorithm

Materials and Manufacturing Processes

2010 | journal-article

NUMERICAL SIMULATION AND EXPERIMENTAL VALIDATION WHEN PRECISION RADIAL TURNING AISI 1045 STEEL

Micro and Nanomanufacturing Research

2010 | journal-article

Nano and Micromachining

Nano and Micromachining

2010 | book

Neural network approach for estimating the residual tensile strength after drilling in uni-directional glass fiber reinforced plastic laminates

Materials and Design

2010 | journal-article

OPTIMIZATION OF ABRASIVE FLOW MACHINING PROCESS PARAMETERS USING PARTICLE SWARM OPTIMIZATION AND SIMULATED ANNEALING ALGORITHMS

Artificial Intelligence in Manufacturing Research

2010 | journal-article

Optimisation of process parameters of mechanical type advanced machining processes using a simulated annealing algorithm

International Journal of Materials and Product Technology

2010 | journal-article

Optimisation of process parameters of mechanical type advanced machining processes using a simulated annealing algorithm

International Journal of Materials and Product Technology

2010 | journal-article

Optimization of surface roughness in micromilling

Materials and Manufacturing Processes

2010 | journal-article

Parameter optimization of ultrasonic machining process using nontraditional optimization algorithms

Materials and Manufacturing Processes

2010 | journal-article

Performance of diamond coated tools (CVD) in machining polyamides

International Journal of Materials and Product Technology

2010 | journal-article

Performance of diamond coated tools (CVD) in machining polyamides

International Journal of Materials and Product Technology

2010 | journal-article

Preface

Surface Integrity in Machining

2010 | book

Preface

Nano and Micromachining

2010 | book

Preface

Metal Cutting: Research Advances

2010 | book

SPECIAL ISSUE: EXPERIMENTAL AND NUMERICAL STUDIES ON MACHINABILITY OF MATERIALS

International Journal of Materials and Product Technology

2010 | journal-article

STUDY OF EFFECTS OF PROCESS PARAMETERS ON BURR HEIGHT IN DRILLING OF AISI 316 STAINLESS STEEL USING ARTIFICIAL NEURAL NETWORK MODEL

Artificial Intelligence in Manufacturing Research

2010 | journal-article

Study on the influence of MQL and cutting conditions on machinability of brass using Artificial Neural Network

International Journal of Materials and Product Technology

2010 | journal-article

Study on the influence of MQL and cutting conditions on machinability of brass using Artificial Neural Network

International Journal of Materials and Product Technology

2010 | journal-article

Surface Integrity in Machining

Surface Integrity in Machining

2010 | journal-article

Surface Texture Characterization and Evaluation Related to Machining

Surface Integrity in Machining

2010 | journal-article

Surface texture characterization and evaluation related to machining

Surface Integrity in Machining

2010 | book-chapter

THE EFFECT OF CUTTING SPEED ON CUTTING FORCES AND SURFACE FINISH WHEN MICRO-TURNING POLYAMIDES

Micro and Nanomanufacturing Research

2010 | journal-article

THE SURFACE INTEGRITY OF COMPOSITE LAMINATES SUBJECTED TO DRILLING

Composite Laminates: Properties, Performance and Applications

2010 | journal-article

TRIBOLOGY OF FUNCTIONALISED CARBON NANOFILLERS BASED POLYMER COMPOSITES

Tribology of Composite Materials

2010 | journal-article

The influence of tool wear on delamination when drilling glass fibre reinforced epoxy composite with high speed steel and cemented carbide tools

International Journal of Materials and Product Technology

2010 | journal-article

The influence of tool wear on delamination when drilling glass fibre reinforced epoxy composite with high speed steel and cemented carbide tools

International Journal of Materials and Product Technology

2010 | journal-article

The surface integrity of composite laminates subjected to drilling

Composite Laminates: Properties, Performance and Applications

2010 | book-chapter

A soft computing based optimisation of multi-pass turning processes

International Journal of Materials and Product Technology

2009 | journal-article

A study of drilling performances with minimum quantity of lubricant using fuzzy logic rules

Mechatronics

2009 | journal-article

A study of plastic strain and plastic strain rate in machining of steel AISI 1045 using FEM analysis

Materials and Design

2009 | journal-article

ANALYSIS OF DELAMINATION IN DRILLING WOOD COMPOSITE MEDIUM DENSITY FIBREBOARDS

Drilling of Composite Materials

2009 | journal-article

Analysis of machinability during hard turning of cold work tool steel (type: AISI D2)

Materials and Manufacturing Processes

2009 | journal-article

Application of goal programming technique for electro discharge machining (EDM) characteristics of cemented carbide (WC/Co)

International Journal of Materials and Product Technology

2009 | journal-article

Assessment of some factors influencing tool wear on the machining of glass fibre-reinforced plastics by coated cemented carbide tools

Journal of Materials Processing Technology

2009 | journal-article

Dimensional and geometric deviations induced by drilling of polymeric composite

Journal of Reinforced Plastics and Composites

2009 | journal-article

EFFECT OF APPLIED LOAD ON DRY SLIDING WEAR BEHAVIOUR AND SUBSURFACE STUDIES ON HYBRID METAL MATRIX COMPOSITES

Tribology Research Advances

2009 | journal-article

Effect of the reinforcement (carbon or glass fibres) on friction and wear behaviour of the PEEK against steel surface at long dry sliding

Wear

2009 | journal-article

Influence of cutting conditions on machinability aspects of PEEK, PEEK CF 30 and PEEK GF 30 composites using PCD tools

Journal of Materials Processing Technology

2009 | journal-article

MODELING TOOL WEAR AND SPECIFIC CUTTING FORCE IN DRILLING OF ALUMINIUM MATRIX COMPOSITES USING ARTIFICIAL NEURAL NETWORKS

Drilling of Composite Materials

2009 | journal-article

MODELS OF FRICTION AND WEAR OF BRASS/STEEL PAIR BASED ON ARTIFICIAL NEURAL NETWORKS

Tribology Research Advances

2009 | journal-article

Machinability aspects concerning micro-turning of PA66-GF30-reinforced polyamide

International Journal of Advanced Manufacturing Technology

2009 | journal-article

Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts

International Journal of Refractory Metals and Hard Materials

2009 | journal-article

Machinability study in microTurning of PA66 GF30 polyamide with a PCD tool

Materials and Manufacturing Processes

2009 | journal-article

Machinability study on precision turning of PA66 polyamide with and without glass fiber reinforcing

Materials and Design

2009 | journal-article

Merchant model applied to precision orthogonal cutting of pa66 polyamide with and without glass fiber reinforcing

Journal of Composite Materials

2009 | journal-article

Multi-objective optimisation of multipass turning by using a genetic algorithm

International Journal of Materials and Product Technology

2009 | journal-article

Multiperformance optimization in turning of free-machining steel using taguchi method and utility concept

Journal of Materials Engineering and Performance

2009 | journal-article

Neural network process modelling for turning of steel parts using conventional and wiper inserts

International Journal of Materials and Product Technology

2009 | journal-article

Optimisation of Multi-pass cutting parameters in Face-milling based on genetic search

International Journal of Advanced Manufacturing Technology

2009 | journal-article

Optimisation of surface roughness in hard turning AISI D2 steel using TSK-type fuzzy logic rules

International Journal of Materials and Product Technology

2009 | journal-article

Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis

Journal of Materials Processing Technology

2009 | journal-article

Performance of cutting tools in machining Cu/W alloys for application in EDM electrodes

International Journal of Refractory Metals and Hard Materials

2009 | journal-article

Precision radial turning of AISI D2 steel

International Journal of Advanced Manufacturing Technology

2009 | journal-article

Predicting burr size in drilling of AISI 316L stainless steel using response surface analysis

International Journal of Materials and Product Technology

2009 | journal-article

Preparation and characterization of SiAlON matrix composites reinforced with combustion synthesis rod-like SiAlON particles

International Journal of Refractory Metals and Hard Materials

2009 | journal-article

SOME STUDIES ABOUT MACHINING OF MMC'S BY MQL(MINIMUM QUANTITY OF LUBRICANT) CONDITIONS

Composites and Advanced Materials

2009 | journal-article

SPECIAL ISSUE: ADVANCES IN THE ANALYSIS OF SURFACE TEXTURE IN ENGINEERING MANUFACTURE

International Journal of Surface Science and Engineering

2009 | journal-article

SPECIAL ISSUE: INTELLIGENT MACHINING: COMPUTATIONAL METHODS AND OPTIMISATION

International Journal of Materials and Product Technology

2009 | journal-article

Some studies about machining of MMC'S by MQL (minimum quantity of lubricant) conditions

Advanced Composites Letters

2009 | journal-article

Some studies in metal matrix composites machining using response surface methodology

Journal of Reinforced Plastics and Composites

2009 | journal-article

Study on Some Aspects of Machinability in Unreinforced and Reinforced Polyamides(vol 43, pg 725, 2007)

Journal of Composite Materials

2009 | journal-article

Study on some aspects of machinability in unreinforced and reinforced polyamides

Journal of Composite Materials

2009 | journal-article

Surface roughness aspects in milling MDF (medium density fibreboard)

International Journal of Advanced Manufacturing Technology

2009 | journal-article

The effect of tool geometry on the machinability of polyamide during precision turning

Journal of Composite Materials

2009 | journal-article

Tool Design, Tool Wear and Tool Life

Machining Dynamics: Fundamentals, Applications and Practices

2009 | journal-article

A comparative study of the ANN and RSM modeling approaches for predicting burr size in drilling

International Journal of Advanced Manufacturing Technology

2008 | journal-article

A decision-making framework model for material selection using a combined multiple attribute decision-making method

International Journal of Advanced Manufacturing Technology

2008 | journal-article

An experimental and statistical study on the effect of drill geometries on force and hole quality in drilling of glass fibre reinforced plastic

International Journal of Materials and Product Technology

2008 | journal-article

An investigative study of delamination in drilling of medium density fibreboard (MDF) using response surface models

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites

Journal of Materials Processing Technology

2008 | journal-article

Analysis of surface roughness parameters in turning of FRP tubes by PCD tool

Journal of Materials Processing Technology

2008 | journal-article

Artificial neural network based on genetic learning for machining of polyetheretherketone composite materials

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Chemical vapour deposition (CVD) diamond coated tools performance in machining of PEEK composites

Materials and Design

2008 | journal-article

Comparative study of friction behaviour of alumina and zirconia ceramics against steel under water lubricated conditions

Industrial Lubrication and Tribology

2008 | journal-article

Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model

Materials and Design

2008 | journal-article

Delamination in high speed drilling of Carbon Fiber Reinforced Plastic (CFRP)

Journal of Composite Materials

2008 | journal-article

Development of an empirical model for surface roughness in the machining of Al/SiC particulate composites by PCD tool

International Journal of Materials and Product Technology

2008 | journal-article

Drilling investigation of MDF (medium density fibreboard)

Journal of Materials Processing Technology

2008 | journal-article

Drilling of hybrid aluminium matrix composites

International Journal of Advanced Manufacturing Technology

2008 | journal-article

EDITORIAL RETRACTION

Machining Science and Technology

2008 | journal-article

Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor

International Journal of Machine Tools and Manufacture

2008 | journal-article

Evaluation of cutting quality of PMMA using CO2 lasers

International Journal of Advanced Manufacturing Technology

2008 | journal-article

FEM analysis in high speed machining of aluminium alloy (Al7075-0) using polycrystalline diamond (PCD) and cemented carbide (K10) cutting tools

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Impact of surface roughness of diamond coatings on the cutting performance when dry machining of graphite

International Journal of Manufacturing Technology and Management

2008 | journal-article

Influence of drill point angle in high speed drilling of glass fiber reinforced plastics

Journal of Composite Materials

2008 | journal-article

Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models

Journal of Materials Processing Technology

2008 | journal-article

Investigative study on machinability aspects of unreinforced and reinforced PEEK composite machining using ANN model

Journal of Reinforced Plastics and Composites

2008 | journal-article

Modelling cutting power and tool wear in turning of aluminium matrix composites using artificial neural networks

International Journal of Materials and Product Technology

2008 | journal-article

Modelling of tribological behaviours of composite PEEK-CF30 using BP neural networks

Materials Science- Poland

2008 | journal-article

Modelling of tribological behaviours of composite PEEK-CF30 using BP neural networks

Materials Science-Poland

2008 | journal-article

Multi-parameter surface roughness analysis in turning of polyamide composite using polycrystalline diamond tool

International Journal of Materials and Product Technology

2008 | journal-article

Optimization of electrical discharge machining characteristics of WC/Co composites using non-dominated sorting genetic algorithm (NSGA-II)

International Journal of Advanced Manufacturing Technology

2008 | journal-article

Optimizing friction behavior of clutch facings using pin-on-disk test

International Journal of Physical Sciences

2008 | journal-article

Predicting machinability parameters on drilling glass fibre reinforced plastics using response surface methodology

International Journal of Materials and Product Technology

2008 | journal-article

Predicting the geometric form of clad in laser cladding by powder using multiple regression analysis (MRA)

Materials and Design

2008 | journal-article

Prediction and minimization of delamination in drilling of Medium-Density Fiberboard (MDF) using response surface methodology and Taguchi design

Materials and Manufacturing Processes

2008 | journal-article

Prediction and optimization of surface roughness in milling of medium density fiberboard (MDF) based on Taguchi orthogonal array experiments

Holzforschung

2008 | journal-article

Preface

Machining: Fundamentals and Recent Advances

2008 | book

Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass

Journal of Materials Processing Technology

2008 | journal-article

Some experimental studies on CO2 laser cutting quality of polymeric materials

Journal of Materials Processing Technology

2008 | journal-article

Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques

Journal of Materials Processing Technology

2008 | journal-article

Special issue: Advances in machining of composite materials

International Journal of Materials and Product Technology

2008 | journal-article

Statistical analysis of delamination in drilling Glass Fiber-Reinforced Plastics (GFRP)

Journal of Reinforced Plastics and Composites

2008 | journal-article

Statistical study of surface roughness in turning of peek composites

Materials and Design

2008 | journal-article

Taguchi approach for achieving better machinability in unreinforced and reinforced polyamides

Journal of Reinforced Plastics and Composites

2008 | journal-article

Taguchi multiple-performance characteristics optimization in drilling of medium density fibreboard (MDF) to minimize delamination using utility concept

Journal of Materials Processing Technology

2008 | journal-article

The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite

Materials and Design

2008 | journal-article

Thrust force and wear assessment when drilling glass fiber-reinforced polymeric composite

Journal of Composite Materials

2008 | journal-article

Tools (geometry and material) and tool wear

Machining: Fundamentals and Recent Advances

2008 | book-chapter

A comparative evaluation of the turning of reinforced and unreinforced polyamide

International Journal of Advanced Manufacturing Technology

2007 | journal-article

A note on tribological behaviour of α-sialon/steel couples under dry conditions

Materials and Design

2007 | journal-article

A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates

Composites Science and Technology

2007 | journal-article

Application of Merchant theory in machining particulate metal matrix composites

Materials and Design

2007 | journal-article

Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites

Materials and Design

2007 | journal-article

Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked tool steel with a ceramic tool

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2007 | journal-article

Comparative evaluation of conventional and wiper ceramic tools on cutting forces, surface roughness, and tool wear in hard turning AISI D2 steel

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2007 | journal-article

Delamination assessment after drilling medium-density fibreboard (MDF) by digital image analysis

Holzforschung

2007 | journal-article

Drilling of fiber reinforced plastics: A review

Journal of Materials Processing Technology

2007 | journal-article

Effect of crystalline structure on the hardness and interfacial adherence of flame sprayed poly(ether-ether-ketone) coatings

European Polymer Journal

2007 | journal-article

Evaluation of delamination in drilling medium density fibreboard

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2007 | journal-article

Experimental characterization of frictional behaviour of clutch facings using Pin-on-disk machine

Materials and Design

2007 | journal-article

Experimental cutting model of metal matrix composites (MMCs)

Journal of Materials Processing Technology

2007 | journal-article

Integrating Taguchi principle with genetic algorithm to minimize burr size in drilling of AISI 316L stainless steel using an artificial neural network model

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2007 | journal-article

Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques

Materials and Design

2007 | journal-article

Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites

Materials and Design

2007 | journal-article

Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts

Journal of Materials Processing Technology

2007 | journal-article

New machinability study of glass fibre reinforced plastics using polycrystalline diamond and cemented carbide (K15) tools

Materials and Design

2007 | journal-article

Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search

Optics and Laser Technology

2007 | journal-article

Prediction on tribological behaviour of composite PEEK-CF30 using artificial neural networks

Journal of Materials Processing Technology

2007 | journal-article

Special Issue on Diamond and Diamond-Coated Tools for Machining Precision Surfaces

International Journal of Surface Science and Engineering

2007 | journal-article

Turning of brasses using minimum quantity of lubricant (MQL) and flooded lubricant conditions

Materials and Manufacturing Processes

2007 | journal-article

Untitled

International Journal of Surface Science and Engineering

2007 | journal-article

Cutting performance of time-modulated chemical vapour deposited diamond coated tool inserts during machining graphite

Diamond and Related Materials

2006 | journal-article

Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2006 | journal-article

Friction and wear behaviour of β-silicon nitride-steel couples under unlubricated conditions

Materials Science and Technology

2006 | journal-article

Laser cladding: An experimental study of geometric form and hardness of coating using statistical analysis

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2006 | journal-article

Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms

Composites Science and Technology

2006 | journal-article

Physical cutting model of Polyetheretherketone composites

Materials and Design

2006 | journal-article

Physical cutting model of polyamide composites (PA66 GF30)

Functionally Graded Materials Vii

2006 | journal-article

The performance of cutting fluids when machining aluminium alloys

Industrial Lubrication and Tribology

2006 | journal-article

Tribological behaviour of the composite PEEK-CF30 at dry sliding against steel using statistical techniques

Materials and Design

2006 | journal-article

A new machinability index in turning fiber reinforced plastics

Journal of Materials Processing Technology

2005 | journal-article

A note on the effect of temperature on the friction and wear behaviour of carbon-fibre-reinforced Polyetheretherketone (PEEK-CF30) at dry sliding

International Journal of Microstructure and Materials Properties

2005 | journal-article

Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments

Journal of Materials Processing Technology

2005 | journal-article

Hard turning: AISI 4340 high strength low alloy steel and AISI D2 cold work tool steel

Journal of Materials Processing Technology

2005 | journal-article

Influence of the chemical composition on the machinability of brasses

Journal of Materials Processing Technology

2005 | journal-article

Optimal machining parameters based on surface roughness experimental data and genetic search

Industrial Lubrication and Tribology

2005 | journal-article

Optimisation of surface roughness on turning fibre-reinforced plastics (FRPs) with diamond cutting tools

International Journal of Advanced Manufacturing Technology

2005 | journal-article

Thermo-mechanical model to predict the tribological behaviour of the composite PEEK-CF30/steel pair in dry sliding using multiple regression analysis

Industrial Lubrication and Tribology

2005 | journal-article

Tribological behaviour of colloidally processed sialon ceramics sliding against steel under dry conditions

Tribology Letters

2005 | journal-article

Wear behavior on advanced structural ceramics: α-sialon matrix reinforced with β-sialon fibers

Materials and Design

2005 | journal-article

Furação de laminados epóxidos reforçados

Revista Iberoamericana de Ingeniería Mecánica

2004 | journal-article

A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA)

Composite Structures

2004 | journal-article

Dimensional precision and surface roughness on turning tubes in fibre reinforced plastics based on the design experiments

International Journal of Materials and Product Technology

2004 | journal-article

Drilling fiber reinforced plastics (FRPs) manufactured by hand lay-up: Influence of matrix (Viapal VHP 9731 and ATLAC 382-05)

Journal of Materials Processing Technology

2004 | journal-article

Dynamical experimental study of friction and wear behaviour of bovine cancellous bone sliding against a metallic counterface in a water lubricated environment

Journal of Materials Processing Technology

2004 | journal-article

Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up

Composites Science and Technology

2004 | journal-article

Influence of cutting parameters on surface roughness in turning glass-fibre-reinforced plastics using statistical analysis

Industrial Lubrication and Tribology

2004 | journal-article

Machinability study on composite (polyetheretherketone reinforced with 30% glass fibre?PEEK GF 30) using polycrystalline diamond (PCD) and cemented carbide (K20) tools

The International Journal of Advanced Manufacturing Technology

2004 | journal-article

Multiple regression analysis (MRA) in modelling milling of glass fibre reinforced plastics (GFRP)

International Journal of Manufacturing Technology and Management

2004 | journal-article

Design of optimisation of cutting parameters for turning metal matrix composites based on the orthogonal arrays

Journal of Materials Processing Technology

2003 | journal-article

Drilling carbon fiber reinforced plastics manufactured by autoclave-experimental and statistical study

Materials and Design

2003 | journal-article

Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced (GF30) for applications in structural components

Composite Structures

2003 | journal-article

Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments

Composite Structures

2003 | journal-article

Study of drilling metal-matrix composites based on the Taguchi techniques

Journal of Materials Processing Technology

2003 | journal-article

Diamond tool performance in machining metal-matrix composites

Journal of Materials Processing Technology

2002 | journal-article

Optimal cutting conditions in turning of particulate metal matrix composites based on experiment and a genetic search model

Composites - Part A: Applied Science and Manufacturing

2002 | journal-article

Tribological Comparative Study of Conventional and Composite Materials in Biomedical Applications

Key Engineering Materials

2002 | journal-article

A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments

Journal of Materials Processing Technology

2001 | journal-article

Cutting force, tool wear and surface finish in drilling metal matrix composites

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

2001 | journal-article

Effect of carbon fibre reinforcement in the frictional behaviour of Peek in a water lubricated environment

Wear

2001 | journal-article

Evaluation of tribological behaviour of polymeric materials for hip prostheses application

Tribology Letters

2001 | journal-article

Optimal drilling of particulate metal matrix composites based on experimental and numerical procedures

International Journal of Machine Tools and Manufacture

2001 | journal-article

Optimisation of cutting conditions in machining of aluminium matrix composites using a numerical and experimental model

Journal of Materials Processing Technology

2001 | journal-article

Turning particulate metal matrix composites: experimental study of the evolution of the cutting forces, tool wear and workpiece surface roughness with the cutting time

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

2001 | journal-article

Experimental study of the tribological behaviour of the brass/steel pair

Journal of Materials Processing Technology

2000 | journal-article

Friction and adhesion behavior of polycrystalline diamond films deposited on metals

Surface and Coatings Technology

2000 | journal-article

Relationship between cutting force and PCD cutting tool wear in machining silicon carbide reinforced aluminum

Journal of Materials Processing Technology

2000 | journal-article

Relationship between flexural strength and surface roughness for hot-pressed Si3N4 self-reinforced ceramics

Journal of the European Ceramic Society

2000 | journal-article

This user account status is Approved