Algoritmi | User | Marilena Carmen Butuc
Marilena Carmen Butuc
Marilena Carmen Butuc
Personal Email
Orcid
0000-0001-6281-0891Researcher ID
FCT Public Key
Ciência ID
251B-9952-38DCGoogle Scholar
About Me
M.C. Butuc received a PhD degree in Mechanical Engineering from the Faculty of Engineering, Porto University, Portugal, in 2004. The work of Dr. M.C. Butuc was dedicated to developing models for predicting the sheet metal forming limits under linear and complex loadings, by using the most advanced phenomenological and physically-based plasticity models. The quality and broadness of these results allowed Dr. M.C. Butuc to develop a very good expertise in the field of material modeling and development of scientific software. She has published 51 papers, 21 in proceedings of international conferences and 30 in international peer review journals, getting more than 600 citations (SCOPUS) and the h-index of 12 (SCOPUS). M.C. Butuc is acting as reviewer of the International Journal of Plasticity, International Journal of Mechanical Sciences, International Journal of Material Forming, Transactions of Nonferrous Metals Society of China and Mathematical Problems in Engineering. M.C. Butuc participated as a member of scientific teams in three European research projects and fourteen national research projects. Dr. M.C. Butuc is researcher at the Centre for Mechanical Technology and Automation, (TEMA), University of Aveiro, Portugal and LASI - Intelligent Systems Associate Laboratory, Portugal. She is also member of the Scientific Committee of the European Scientific Association for Material Forming (ESAFORM).
Publications (33)
Formability of third generation advanced high strength steel: experimental and theoretical approach
International Journal of Mechanical Sciences
2024 | journal-article
Bending of third generation steel: Experimental and numerical approach
The 27th International ESAFORM Conference on Material Forming ESAFORM 2024
2024 | conference-paper
Effect of prestrain on mechanical behavior of aluminum alloys
26th International ESAFORM Conference on Material Forming, ESAFORM 2023
2023 | conference-paper
Numerical and Experimental Analysis of the Anisotropy Evolution in Aluminium Alloys Processed by Asymmetric Rolling
European Journal of Computational Mechanics
2022 | journal-article
Study on Asymmetric Rolling Process Applied to Aluminum Alloy Sheets
Machines
2022 | journal-article
Study on the Effect of Anisotropy on Plastic Flow Localization of Third Generation Advanced High Strength Steel
Key Engineering Materials
2022 | journal-article
Numerical Study on Asymmetrical Rolled Aluminum Alloy Sheets Using the Visco-Plastic Self-Consistent (VPSC) Method
Metals
2022 | journal-article
Damage Analysis of Third-Generation Advanced High-Strength Steel Based on the Gurson–Tvergaard–Needleman (GTN) Model
Metals
2022 | journal-article
Development of a Device Compatible with Universal Testing Machine to Perform Hole Expansion and Erichsen Cupping Tests
Machines
2020 | journal-article
Asymmetrical rolling of aluminum alloys and steels: A review
2020 | journal-article
Strain path changes in aluminum
AIP Conference Proceedings
2019 | conference-paper
The evaluation of laserweldability of the third-generation advanced high strength steel
Metals
2019 | journal-article
The formability of twinning—Induced plasticity steels predicted on the base of Marciniak-Kuczynski theory
Journal of Materials Processing Technology
2019 | journal-article
The formability prediction of twinning-induced plasticity steels
AIP Conference Proceedings
2019 | conference-paper
The performance of Marciniak - Kuczinsky approach on prediction of plastic instability of metals subjected to complex loadings
Journal of Physics: Conference Series
2018 | conference-paper
Mechanical behaviour of TWIP steel under shear loading
Journal of Physics: Conference Series
2016 | conference-paper
A theoretical study of the effect of the double strain path change on the forming limits of metal sheet
Key Engineering Materials
2013 | book
Experiments and modeling of low carbon steel sheet subjected to double strain path changes
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2013 | journal-article
Analysis of sheet metal formability through isotropic and kinematic hardening models
European Journal of Mechanics, A/Solids
2011 | journal-article
Plastic instability in complex strain paths predicted by advanced constitutive equations
AIP Conference Proceedings
2011 | conference-paper
Study on plastic flow localization prediction using a physically-based hardening model
Computational Materials Science
2011 | journal-article
A new model for FLD prediction based on advanced constitutive equations
International Journal of Material Forming
2010 | journal-article
Sheet metal forming limit predictions based on advanced constitutive equations
International Journal of Material Forming
2010 | journal-article
Analysis of plastic flow localization under strain paths changes and its coupling with finite element simulation in sheet metal forming
Journal of Materials Processing Technology
2009 | journal-article
Plastic instability in complex strain paths and finite element simulation for localised necking prediction in sheet metal forming technology
International Journal of Materials and Product Technology
2008 | journal-article
An experimental and theoretical analysis on the application of stress-based forming limit criterion
International Journal of Mechanical Sciences
2006 | journal-article
Theorical and experimental determination of the forming limit diagram for the AISI 304 stainless steel
Journal of Materials Processing Technology
2006 | journal-article
A comparative study between strain and stress based forming limit analysis by applying several phenomenological yield criteria
AIP Conference Proceedings
2005 | conference-paper
A theoretical study on forming limit diagrams prediction
Journal of Materials Processing Technology
2003 | journal-article
Study on forming limit diagrams prediction using a phenomenological and a physical approach of plasticity theory
Journal De Physique. IV : JP
2003 | conference-paper
A more general model for forming limit diagrams prediction
Journal of Materials Processing Technology
2002 | journal-article
Forming limit diagram for 6016-T4 aluminium alloy deformed along linear and complex strain paths
Key Engineering Materials
2002 | book
The performance of Yld96 and BBC2000 yield functions in forming limit prediction
Journal of Materials Processing Technology
2002 | journal-article
Formability of third generation advanced high strength steel: experimental and theoretical approach
International Journal of Mechanical Sciences
2024 | journal-article
Bending of third generation steel: Experimental and numerical approach
The 27th International ESAFORM Conference on Material Forming ESAFORM 2024
2024 | conference-paper
Effect of prestrain on mechanical behavior of aluminum alloys
26th International ESAFORM Conference on Material Forming, ESAFORM 2023
2023 | conference-paper
Numerical and Experimental Analysis of the Anisotropy Evolution in Aluminium Alloys Processed by Asymmetric Rolling
European Journal of Computational Mechanics
2022 | journal-article
Study on Asymmetric Rolling Process Applied to Aluminum Alloy Sheets
Machines
2022 | journal-article
Study on the Effect of Anisotropy on Plastic Flow Localization of Third Generation Advanced High Strength Steel
Key Engineering Materials
2022 | journal-article
Numerical Study on Asymmetrical Rolled Aluminum Alloy Sheets Using the Visco-Plastic Self-Consistent (VPSC) Method
Metals
2022 | journal-article
Damage Analysis of Third-Generation Advanced High-Strength Steel Based on the Gurson–Tvergaard–Needleman (GTN) Model
Metals
2022 | journal-article
Development of a Device Compatible with Universal Testing Machine to Perform Hole Expansion and Erichsen Cupping Tests
Machines
2020 | journal-article
Asymmetrical rolling of aluminum alloys and steels: A review
2020 | journal-article
Strain path changes in aluminum
AIP Conference Proceedings
2019 | conference-paper
The evaluation of laserweldability of the third-generation advanced high strength steel
Metals
2019 | journal-article
The formability of twinning—Induced plasticity steels predicted on the base of Marciniak-Kuczynski theory
Journal of Materials Processing Technology
2019 | journal-article
The formability prediction of twinning-induced plasticity steels
AIP Conference Proceedings
2019 | conference-paper
The performance of Marciniak - Kuczinsky approach on prediction of plastic instability of metals subjected to complex loadings
Journal of Physics: Conference Series
2018 | conference-paper
Mechanical behaviour of TWIP steel under shear loading
Journal of Physics: Conference Series
2016 | conference-paper
A theoretical study of the effect of the double strain path change on the forming limits of metal sheet
Key Engineering Materials
2013 | book
Experiments and modeling of low carbon steel sheet subjected to double strain path changes
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2013 | journal-article
Analysis of sheet metal formability through isotropic and kinematic hardening models
European Journal of Mechanics, A/Solids
2011 | journal-article
Plastic instability in complex strain paths predicted by advanced constitutive equations
AIP Conference Proceedings
2011 | conference-paper
Study on plastic flow localization prediction using a physically-based hardening model
Computational Materials Science
2011 | journal-article
A new model for FLD prediction based on advanced constitutive equations
International Journal of Material Forming
2010 | journal-article
Sheet metal forming limit predictions based on advanced constitutive equations
International Journal of Material Forming
2010 | journal-article
Analysis of plastic flow localization under strain paths changes and its coupling with finite element simulation in sheet metal forming
Journal of Materials Processing Technology
2009 | journal-article
Plastic instability in complex strain paths and finite element simulation for localised necking prediction in sheet metal forming technology
International Journal of Materials and Product Technology
2008 | journal-article
An experimental and theoretical analysis on the application of stress-based forming limit criterion
International Journal of Mechanical Sciences
2006 | journal-article
Theorical and experimental determination of the forming limit diagram for the AISI 304 stainless steel
Journal of Materials Processing Technology
2006 | journal-article
A comparative study between strain and stress based forming limit analysis by applying several phenomenological yield criteria
AIP Conference Proceedings
2005 | conference-paper
A theoretical study on forming limit diagrams prediction
Journal of Materials Processing Technology
2003 | journal-article
Study on forming limit diagrams prediction using a phenomenological and a physical approach of plasticity theory
Journal De Physique. IV : JP
2003 | conference-paper
A more general model for forming limit diagrams prediction
Journal of Materials Processing Technology
2002 | journal-article
Forming limit diagram for 6016-T4 aluminium alloy deformed along linear and complex strain paths
Key Engineering Materials
2002 | book
The performance of Yld96 and BBC2000 yield functions in forming limit prediction
Journal of Materials Processing Technology
2002 | journal-article