Algoritmi | User | Joana Mesquita-Guimaraes
Joana Mesquita-Guimaraes
Joana Mesquita-Guimaraes
Personal Email
Orcid
0000-0002-6342-7824Researcher ID
FCT Public Key
Ciência ID
3410-48BF-42A6Google Scholar
About Me 
Joana Mesquita-Guimarães has graduated in Ceramic and Glass Engineering (2007) at the University of Aveiro, Portugal. She obtained her PhD at the Autonomous University of Madrid (2012) - recognised by the University of Aveiro in Materials Science and Engineering - developing her research work at the Institute of Ceramic and Glass (ICV/CSIC), Spain. Joana Mesquita Guimarães is a Doctorate Researcher at Universidade de Aveiro, at TEMA - Centre for Mechanical Technology and Automation, and a member of the Intelligent Systems Associate Laboratory (LASI). Since 2014, she has worked on biomaterials, developing functional solutions for specific dental prosthesis parts based on i) mechanical behaviour under compressive/shear load and ii) Bone grafting and antibacterial materials. In addition, Joana has focused her research work on additive manufacturing techniques. Moreover, it has developed and tested bioactive and antibacterial surfaces. Published 44 ISI articles, 904 citations, and h-index: 19. In addition, she is a guest editor, member of the editorial board of 6 journals, and reviewer of 26 peer-reviewed and indexed journals. Has 3 patents registered and 1 under submission. Is PI of a MEDISIS project Discoveries CTR (Centre for Regenerative and Precision Medicine). Supervised more than 45 students (BSc, MSc and PhD). Oral and poster presentations at more than 25 International conferences. Committee member in 5 event(s), Session Chair in 5 international conferences. Has received 5 awards and/or honours. Participated as a PhD Student in 2 project(s), a Pos-doctoral Fellow in 3 project(s) and a Researcher in 4 project(s). In their professional activities, they interacted with international collaborator(s) being co-authorship of scientific papers.
Publications (115)
Evaluation of the impact of Surface Texturing and Dual Coating on Zirconia Dental Implants
I Workshop on Zirconia Dental Implants - Concept, Manufacturing, Mechanical and Biological Properties
2024 | conference-poster
Investigation of acemanann as potential angiogenic coating
Research Summit 2024
2024 | conference-poster
Investigation of potential angiogenic coatings for dental implants.
Encontro Ciência 2024 - Science and Technology Summit
2024 | conference-poster
Mechanical analysis and dimensional control of 3D-printing microneedles for gingiva healing application
Encontro de Ciência2024
2024 | conference-poster
Microneedles fabrication via DLP for gingiva healing application: Dimensional control
TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
2024 | conference-abstract
The effect of S53P4 Bioactive glass coatings crystallinity and laser surface texturing on zirconia dental implants mineralisation and MC3T3-E1 cell adhesion
TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
2024 | conference-abstract
Double-size texturisation and biphasic calcium phosphate coatings obtained via laser technologies for bioactive zirconia dental implant surfaces
Open Ceramics
2024 | journal-article
Hybrid Zirconia Dental Implant: Proof of concept
BioCAM - Additive Manufacturing Applied to Bioceramics
2023 | conference-poster
Multiscale modelling of the thermoelastic properties of alumina-zirconia ceramics for 3D printing
Ceramics International
2023 | journal-article
Bioactive coatings analysis on double-depth texturization via laser technology for zirconia dental implants
CIÊNCIA 2023, Portuguese Science Summit; Science and Ocean Beyond the Horizon
2023 | conference-poster
Laser surface texturing and numerical simulation of heat flux on Cr2AlC MAX phase heat exchangers
Journal of the European Ceramic Society.
2023 | journal-article
Double-depth texturization and bioactive coatings via laser technology for zirconia dental implants
TEchMA2023 – 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions: book of abstracts
2023 | conference-abstract
CI-21-027 UFSC/UA
2022 | license
Characterisation of the thermoelastic properties of 3D printed ZTA technical ceramics by Asymptotic Expansion Homogenisation
Junior Euromat
2022 | conference-poster
Yttria/ceria stabilized zirconia composites: evaluation of microstructural, mechanical and color properties for biomedical applications
Junior Euromat
2022 | conference-poster
Microstructural Modelling of the Thermoelastic Properties of Dense ZTA Ceramics
2022 | conference-paper
Conventional versus additive manufacturing in the structural performance of dense alumina-zirconia ceramics: 20 years of research, challenges and future perspectives
Journal of Manufacturing Processes
2022 | journal-article
Structural Performance of Dense Alumina-Zirconia Ceramics: An Overview of Conventional versus Additive Manufacturing
Materiais 2022
2022 | conference-paper
Laser texturing and numerical simulation of the heat transfer fluids for Cr2AlC MAX phase
TEchMA 2022 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
2022 | conference-abstract
PROCESSO DE MODIFICAÇÃO DA SUPERFÍCIE DE CARBONATO DE CÁLCIO PROVENIENTE DE CASCAS DE OSTRAS A PARTIR DA FUNCIONALIZAÇÃO COM RESÍDUOS DE ÓLEOS DE FRITURA
2021 | patent
Ceramic Dental Implants: Concept; Fabrication; Mechanical and Biological Properties
MDPI - Multidisciplinary Digital Publishing Institute
2021 | book
Impact of immersion in coloring/fluorescent liquids and aging on the flexural strength of a dental zirconia
Odontology - Springer
2021 | journal-article
In-vitro mechanical and biological evaluation of novel zirconia reinforced bioglass scaffolds for bone repair
Journal of the Mechanical Behavior of Biomedical Materials
2021 | journal-article
On the production of novel zirconia-reinforced bioactive glass porous structures for bone repair
Journal of Materials Science
2021 | journal-article
ARCABOUÇOS DE VIDRO BIOATIVO REFORÇADO POR SEGUNDA FASE CERÂMICA PARA REPARAÇÃO ÓSSEA E PROCESSO DE OBTENÇÃO
2020 | patent
Cell adhesion evaluation of laser-sintered HAp and 45S5 bioactive glass coatings on micro-textured zirconia surfaces using MC3T3-E1 osteoblast-like cells
Materials Science and Engineering C
2020 | journal-article
Challenges and perspectives in additive manufacturing of ceramic materials: an overview of the mechanical properties in the alumina-zirconia system
TEchMA2020 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Centre for Mechanical Technology and Automation (TEMA),
2020 | conference-abstract
Influence of ns-Nd:YAG laser surface treatment on the tensile bond strength of zirconia to resin-matrix cements
Ceramics International
2020 | journal-article
Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering
Journal of the Mechanical Behavior of Biomedical Materials
2020 | journal-article
Oyster shells’ processing for industrial application
Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019
2020 | conference-paper
The Potential Use of Oyster Shell Waste in New Value-Added By-Product
Resources
2019 | journal-article
Mechanical properties of zirconia periodic open cellular structures
Ceramics International
2019 | journal-article
TAMAZ3D - A New Tool for Technical Ceramics 3D-Printing: Structural properties of zirconia-alumina-based technical ceramics produced by additive manufacturing
2nd International Conference of TEMA: Mobilizing Projects
2019 | conference-abstract
Y-TZP/porcelain graded dental restorations design for improved damping behavior – A study on damping capacity and dynamic Young's modulus
Journal of the Mechanical Behavior of Biomedical Materials
2019 | journal-article
Zirconia-Alumina based ceramics produced by robocasting: aiming optimal mechanical properties
SHAPING7, 7th Shaping Conference
2019 | conference-poster
Mesoporous bioactive glass embedding propolis and cranberry antibiofilm compounds
Journal of Biomedical Materials Research Part A
2018 | journal-article
Bioactive glass coatings
Bioactive Glasses: Materials, Properties and Applications
2018 | book-chapter
Bioactive glass coatings
Bioactive Glasses: Materials, Properties and Applications: Second Edition
2018 | book
Bond strength enhancement of zirconia-porcelain interfaces via Nd:YAG laser surface structuring
Journal of the Mechanical Behavior of Biomedical Materials
2018 | journal-article
Development of artificial stone base of oyster shells for application in workbenches
7th International Congress on Ceramics (ICC 7)
2018 | conference-poster
Influence of laser structuring of PEEK, PEEK-GF30 and PEEK-CF30 surfaces on the shear bond strength to a resin cement
Journal of the Mechanical Behavior of Biomedical Materials
2018 | journal-article
Nanostructured biocompatible ceramics and glass-ceramics
Nanostructured Biomaterials for Cranio-Maxillofacial and Oral Applications
2018 | book
Optimized route for the production of zirconia structures with controlled surface porosity for biomedical applications
Ceramics International
2018 | journal-article
Tribological characterization of bioactive zirconia composite layers on zirconia structures
Ceramics International
2018 | journal-article
Wear behaviour of tetragonal zirconia polycrystal with a porous surface
International Journal of Refractory Metals and Hard Materials
2018 | journal-article
Characterization of open-cell and glass-ceramic filled cellular zirconia structures for biomedical applications
European Congress and Exhibition on Advanced Materials and Processes, EUROMAT 17-22
2017 | conference-abstract
Open-cell and glass-ceramic filled cellular zirconia structures for biomedical applications
National Conference on Cellular Materials (MatCel’2017) along with the International Conference of Dynamic Behaviour of Cellular Materials (DynMatCel’2017), MatCel’2017 & DynMatCel’2017, Aveiro, Portugal
2017 | conference-abstract
Strengthening of ceramic scaffolds infiltrated with bioactive glass 58S
European Congress and Exhibition on Advanced Materials and Processes, EUROMAT 17-22, Thessaloniki, Greece
2017 | conference-abstract
Wear and ageing behaviour of porous zirconia layers
National Conference on Cellular Materials (MatCel’2017) along with the International Conference of Dynamic Behaviour of Cellular Materials (DynMatCel’2017), MatCel’2017 & DynMatCel’2017, Aveiro, Portugal
2017 | conference-abstract
Anti-biofilm properties of bioactive glasses embedding organic active compounds
Journal of Biomedical Materials Research - Part A
2017 | journal-article
Impact of coloring/fluorescence-liquids and aging on fracture resistance of zirconia
Dental Materials
2017 | conference-paper
Influence of interlayer design on residual thermal stresses in trilayered and graded all-ceramic restorations
Materials Science and Engineering C
2017 | journal-article
Influence of surface conditioning using laser ablation on bonding strength between PEEK and dental resin
Sociedade Brasileira de Pesquisa em Materiais (SPBMat)
2017 | conference-poster
Influence of the thermal treatment and particle size of Ce-TZP and Y-TZP mixtures, for dental application
European Congress and Exhibition on Advanced Materials and Processes, EUROMAT
2017 | conference-poster
Inhibition of multi-species oral biofilm by bromide doped bioactive glass
Journal of Biomedical Materials Research - Part A
2017 | journal-article
MG-63 Osteoblast-like cell adhesion on Zirconia Scaffolds coated with Bioactive Glasses 58S
5th IBTN Day, Institute of Biomaterials, Tribocorrosion and Nanomedicine
2017 | conference-poster
Mechanical and microstructural properties of PEEK embedding bioactive glasses
Sociedade Brasileira de Pesquisa em Materiais (SPBMat)
2017 | conference-poster
Mechanical properties of layered zirconia to zirconia-hydroxyapatite or zirconia-ß-TCP composites for biomedical applications
MATERIAIS 2017, XVIII Congresso da Sociedade Portuguesa de Materiais and VIII International Symposium on Materials
2017 | conference-poster
Mechanical properties of zirconia with an outer layer of zirconia-hydroxyapatite or zirconia-beta-tricalcium phosphate composites for biomedical applications
5th IBTN Day, Institute of Biomaterials, Tribocorrosion and Nanomedicine
2017 | conference-poster
New perspectives for recycling dental zirconia waste resulting from CAD/CAM manufacturing process
Journal of Cleaner Production
2017 | journal-article
Processing and strengthening of 58S bioactive glass-infiltrated titania scaffolds
Journal of Biomedical Materials Research - Part A
2017 | journal-article
Thermal residual stresses in bilayered, trilayered and graded dental ceramics
Ceramics International
2017 | journal-article
Optimization of a Carbon Nanodots (CNDs) synthesis and development of CND's fluorescent coatings based on SiO2 sol-gel for dental applications
2016 | data-set
Processamento de arcabouços em zircônia revestidos com vidro bioactivo 58S
2016 | data-set
Analysis of residual thermal stress in layered zirconia/porcelain discs for dental applications
XV Brazilian MRS, Proceedings of the XV Brazilian MRS, Campinas, Brazil
2016 | conference-abstract
Analysis of residual thermal stress in layered zirconia/porcelain discs for dental applications
XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting
2016 | conference-poster
Centre for Mechanical Technology and Automation (TEMA) https://www.ua.pt/pt/tema
2016 | website
Characterization of dental zirconia waste resulting from CAD/CAM manufacturing process
22º Congresso Brasileiro de Engenharia e Ciência dos Materiais CBECIMAT
2016 | conference-abstract
FEM and analytical analysis of the bending stress distribution in graded zirconia-based dental ceramics
ISFGM2016 - 14th International Symposium on Functionally Graded Materials
2016 | conference-paper
FEM and analytical analysis of the bending stress distribution in graded zirconia-based dental ceramics
ISFGM2016 - 14th International Symposium on Functionally Graded Materials, 2016, Bayreuth, Germany
2016 | conference-paper
Hybrid scaffolds composed of β-TCP, PDLLA, and collagen for alveolar bone augmentation
Clinical Oral Implants Research
2016 | conference-paper
Processing and characterization of new material obtained from dental zirconia residue of CAD/CAM blanks
XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting
2016 | conference-poster
Processing of oyster shells for industrial application
23º Congresso Brasileiro de Engenharia e Ciência dos Materiais
2016 | conference-poster
Production of zirconia porous structures by dip coating method
XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting
2016 | conference-poster
The bending stress distribution in bilayered and graded zirconia-based dental ceramics
Ceramics International
2016 | journal-article
Optimization of Pechini synthesis and characterization of Ce-TZP and Y-TZP mixtures using commercial and Pechini powders
2015 | data-set
Alternative thermal treatment for Y-TZP and Ce-TZP composites
2015 | data-set
Synthesis and powder processing of 58S bioactive glass doped with bromide
2015 | data-set
Characterization of Noble Metallic Thin Coatings on Lead Glass substrates
Materiais 2015 VII International Materials Symposium/XVII Conference of Sociedade Portuguesa dos Materiais, Porto , Portugal
2015 | conference-abstract
Cerâmica celular de titânia para reconstituição óssea
Congresso dos Estudantes de Ciência e Engenharia de Materiais do Mercosul (CECEMM), UFSCar, São Carlos
2015 | conference-abstract
Evaluation of biaxial stress moment for bilayered and graduated discs using finite element method
New frontiers on biomaterials for bone regeneration, XIV Encontro da SBPMat Rio de Janeiro
2015 | conference-poster
Functionally Graded Materials in Dentistry
Advances in Materials Science Research.
2015 | book-chapter
Hydrothermal degradation of 3Y-TZP and 12Ce-TZP laser sintered for dental applications
14th International Conference of European Ceramic Society (ECERS)
2015 | conference-poster
Mechanical characterization of trilayered all-ceramic dental restorations
New frontiers on biomaterials for bone regeneration, XIV Encontro da SBPMat Rio de Janeiro
2015 | conference-poster
Stress analysis on all-ceramic specimens of different geometries during thermal cycling tests
COMSOL Conference Curitiba
2015 | conference-poster
Effect of aging on the onset of cracks due to redistribution of residual stresses in functionally graded environmental barrier coatings of mullite/ZrO2
2014 | journal-article
The behaviour of Zirconia/Mullite multilayer coatings designed as EBC under water vapour and high-temperature conditions
Universidad Autónoma de Madrid
2012 | dissertation-thesis
Mullite-YSZ multilayered environmental barrier coatings tested in cycling conditions under water vapor atmosphere
2012 | journal-article
Performance of Multilayered Mullite-Based EBCs in Simulated Working Conditions
International Thermal Spray Conference & Exposition (ITSC 2011)
2011 | conference-paper
Mechanical behavior of air plasma-sprayed YSZ functionally graded mullite coatings investigated via instrumented indentation
2011 | journal-article
Phase composition and microstructural responses of graded mullite/YSZ coatings under water vapor environments
2011 | journal-article
Porous mullite and mullite-ZrO2 granules for thermal spraying applications
2011 | journal-article
Mechanical Behaviour of mullite-based multilayer coatings EBC corrosion under Conditions
50th Annual Congress of the Spanish Society of Ceramics and Glass (SECV), Madrid, Spain
2010 | conference-abstract
Water-based corrosion of mullite multilayer EBC coatings
11th International Conference on Modern Materials and Technologies (CIMTEC 2010) Montecatini Terme, Italy
2010 | conference-abstract
Phase Composition and microstructural responses of crystalline mullite / YSZ coating under water steam environments
International Thermal Spray Conference & Exposition (ITSC 2010), Proceeding of the 33th International Thermal Spray Conference & Exposition, Singapore,
2010 | conference-abstract
Crystallization studies in mullite and mullite-YSZ beads
2010 | journal-article
Mullite and mullite/ZrO 2-7wt.%Y 2O 3 powders for thermal spraying of environmental barrier coatings
2010 | journal-article
Thermal conductivity in mullite/ZrO2 composite coatings
2010 | journal-article
Powder Processes conditioning for thermal spraying
Shaping 4 Fourth International Conference on Advanced Ceramics Shaping, Madrid, Spain
2009 | conference-abstract
Procedimiento de obtención de material cerámico de aporte para técnicas de proyección térmica
2009 | patent
Procedimiento de obtención de material cerámico de aporte para técnicas de proyección térmica
2009 | patent
Crystallization studies on thermal sprayed Mullite and Mullite - YSZ
11th International Conference and Exhibition of the European Ceramic Society, Krakow, Poland
2009 | conference-abstract
Mullite Coatings Produced by APS and SPS: Effect of Mullite Powder Spray Processing and Morphology on the microstructure, Crystallinity and Mechanical Properties
International Thermal Spray Conference & Exposition (ITSC 2009), Proceeding of the 32th International Thermal Spray Conference & Exposition, Las Vegas, USA
2009 | conference-abstract
Mullite and Mullite/ZrO2-7wt% Y2O3 powders for Thermal Barrier Coatings Spraying of Environmental
International Thermal Spray Conference & Exposition (ITSC 2009), Proceeding of the 32th International Thermal Spray Conference & Exposition, Las Vegas, USA
2009 | conference-abstract
Mullite and mullite/ZrO2-7wt%Y2O3 powders for thermal spraying of environmental barrier coatings
2009 | conference-paper
Mullite coatings produced by APS and SPS: Effect of powder morphology and spray processing on the microstructure, crystallinity and mechanical properties
2009 | conference-paper
Evolution of the granulometry of calcite in the grinding of hard raw materials for monoporous paste
Universidade de Aveiro
2007 | data-set
Evolution of the granulometry of calcite in the grinding of hard raw materials for monoporous paste
2007 | dissertation-thesis
Determination of porosity of porous ceramic tiles for adjusting the thermal conductivity and thermal comfort
Universidade de Aveiro
2005 | data-set
Determination of porosity of porous ceramic tiles for adjusting the thermal conductivity and thermal comfort
Universidade Federal de Santa Catarina
2005 | dissertation-thesis
Development of novel zirconia implant’s materials gradated design with improved bioactive surface
Journal of the Mechanical Behavior of Biomedical Materials
| journal-article
Evaluation of in vitro properties of 3D micro-macro porous zirconia scaffolds coated with 58S bioactive glass using MG-63 osteoblast-like cells
| journal-article
Production and characterization of zirconia structures with a porous surface
Materials Science and Engineering: C
| journal-article
Shear bond strength of PEEK and PEEK-30GF cemented to zirconia or titanium substrates
Journal of Adhesion Science and Technology
| journal-article
Sliding behavior of zirconia porous implant surfaces against bone
Journal of Biomedical Materials Research – Part B: Applied Biomaterials
| journal-article
Evaluation of the impact of Surface Texturing and Dual Coating on Zirconia Dental Implants
I Workshop on Zirconia Dental Implants - Concept, Manufacturing, Mechanical and Biological Properties
2024 | conference-poster
Investigation of acemanann as potential angiogenic coating
Research Summit 2024
2024 | conference-poster
Investigation of potential angiogenic coatings for dental implants.
Encontro Ciência 2024 - Science and Technology Summit
2024 | conference-poster
Mechanical analysis and dimensional control of 3D-printing microneedles for gingiva healing application
Encontro de Ciência2024
2024 | conference-poster
Microneedles fabrication via DLP for gingiva healing application: Dimensional control
TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
2024 | conference-abstract
The effect of S53P4 Bioactive glass coatings crystallinity and laser surface texturing on zirconia dental implants mineralisation and MC3T3-E1 cell adhesion
TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
2024 | conference-abstract
Double-size texturisation and biphasic calcium phosphate coatings obtained via laser technologies for bioactive zirconia dental implant surfaces
Open Ceramics
2024 | journal-article
Hybrid Zirconia Dental Implant: Proof of concept
BioCAM - Additive Manufacturing Applied to Bioceramics
2023 | conference-poster
Multiscale modelling of the thermoelastic properties of alumina-zirconia ceramics for 3D printing
Ceramics International
2023 | journal-article
Bioactive coatings analysis on double-depth texturization via laser technology for zirconia dental implants
CIÊNCIA 2023, Portuguese Science Summit; Science and Ocean Beyond the Horizon
2023 | conference-poster
Laser surface texturing and numerical simulation of heat flux on Cr2AlC MAX phase heat exchangers
Journal of the European Ceramic Society.
2023 | journal-article
Double-depth texturization and bioactive coatings via laser technology for zirconia dental implants
TEchMA2023 – 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions: book of abstracts
2023 | conference-abstract
CI-21-027 UFSC/UA
2022 | license
Characterisation of the thermoelastic properties of 3D printed ZTA technical ceramics by Asymptotic Expansion Homogenisation
Junior Euromat
2022 | conference-poster
Yttria/ceria stabilized zirconia composites: evaluation of microstructural, mechanical and color properties for biomedical applications
Junior Euromat
2022 | conference-poster
Microstructural Modelling of the Thermoelastic Properties of Dense ZTA Ceramics
2022 | conference-paper
Conventional versus additive manufacturing in the structural performance of dense alumina-zirconia ceramics: 20 years of research, challenges and future perspectives
Journal of Manufacturing Processes
2022 | journal-article
Structural Performance of Dense Alumina-Zirconia Ceramics: An Overview of Conventional versus Additive Manufacturing
Materiais 2022
2022 | conference-paper
Laser texturing and numerical simulation of the heat transfer fluids for Cr2AlC MAX phase
TEchMA 2022 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
2022 | conference-abstract
PROCESSO DE MODIFICAÇÃO DA SUPERFÍCIE DE CARBONATO DE CÁLCIO PROVENIENTE DE CASCAS DE OSTRAS A PARTIR DA FUNCIONALIZAÇÃO COM RESÍDUOS DE ÓLEOS DE FRITURA
2021 | patent
Ceramic Dental Implants: Concept; Fabrication; Mechanical and Biological Properties
MDPI - Multidisciplinary Digital Publishing Institute
2021 | book
Impact of immersion in coloring/fluorescent liquids and aging on the flexural strength of a dental zirconia
Odontology - Springer
2021 | journal-article
In-vitro mechanical and biological evaluation of novel zirconia reinforced bioglass scaffolds for bone repair
Journal of the Mechanical Behavior of Biomedical Materials
2021 | journal-article
On the production of novel zirconia-reinforced bioactive glass porous structures for bone repair
Journal of Materials Science
2021 | journal-article
ARCABOUÇOS DE VIDRO BIOATIVO REFORÇADO POR SEGUNDA FASE CERÂMICA PARA REPARAÇÃO ÓSSEA E PROCESSO DE OBTENÇÃO
2020 | patent
Cell adhesion evaluation of laser-sintered HAp and 45S5 bioactive glass coatings on micro-textured zirconia surfaces using MC3T3-E1 osteoblast-like cells
Materials Science and Engineering C
2020 | journal-article
Challenges and perspectives in additive manufacturing of ceramic materials: an overview of the mechanical properties in the alumina-zirconia system
TEchMA2020 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Centre for Mechanical Technology and Automation (TEMA),
2020 | conference-abstract
Influence of ns-Nd:YAG laser surface treatment on the tensile bond strength of zirconia to resin-matrix cements
Ceramics International
2020 | journal-article
Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering
Journal of the Mechanical Behavior of Biomedical Materials
2020 | journal-article
Oyster shells’ processing for industrial application
Wastes: Solutions, Treatments and Opportunities III - Selected papers from the 5th International Conference Wastes: Solutions, Treatments and Opportunities, 2019
2020 | conference-paper
The Potential Use of Oyster Shell Waste in New Value-Added By-Product
Resources
2019 | journal-article
Mechanical properties of zirconia periodic open cellular structures
Ceramics International
2019 | journal-article
TAMAZ3D - A New Tool for Technical Ceramics 3D-Printing: Structural properties of zirconia-alumina-based technical ceramics produced by additive manufacturing
2nd International Conference of TEMA: Mobilizing Projects
2019 | conference-abstract
Y-TZP/porcelain graded dental restorations design for improved damping behavior – A study on damping capacity and dynamic Young's modulus
Journal of the Mechanical Behavior of Biomedical Materials
2019 | journal-article
Zirconia-Alumina based ceramics produced by robocasting: aiming optimal mechanical properties
SHAPING7, 7th Shaping Conference
2019 | conference-poster
Mesoporous bioactive glass embedding propolis and cranberry antibiofilm compounds
Journal of Biomedical Materials Research Part A
2018 | journal-article
Bioactive glass coatings
Bioactive Glasses: Materials, Properties and Applications
2018 | book-chapter
Bioactive glass coatings
Bioactive Glasses: Materials, Properties and Applications: Second Edition
2018 | book
Bond strength enhancement of zirconia-porcelain interfaces via Nd:YAG laser surface structuring
Journal of the Mechanical Behavior of Biomedical Materials
2018 | journal-article
Development of artificial stone base of oyster shells for application in workbenches
7th International Congress on Ceramics (ICC 7)
2018 | conference-poster
Influence of laser structuring of PEEK, PEEK-GF30 and PEEK-CF30 surfaces on the shear bond strength to a resin cement
Journal of the Mechanical Behavior of Biomedical Materials
2018 | journal-article
Nanostructured biocompatible ceramics and glass-ceramics
Nanostructured Biomaterials for Cranio-Maxillofacial and Oral Applications
2018 | book
Optimized route for the production of zirconia structures with controlled surface porosity for biomedical applications
Ceramics International
2018 | journal-article
Tribological characterization of bioactive zirconia composite layers on zirconia structures
Ceramics International
2018 | journal-article
Wear behaviour of tetragonal zirconia polycrystal with a porous surface
International Journal of Refractory Metals and Hard Materials
2018 | journal-article
Characterization of open-cell and glass-ceramic filled cellular zirconia structures for biomedical applications
European Congress and Exhibition on Advanced Materials and Processes, EUROMAT 17-22
2017 | conference-abstract
Open-cell and glass-ceramic filled cellular zirconia structures for biomedical applications
National Conference on Cellular Materials (MatCel’2017) along with the International Conference of Dynamic Behaviour of Cellular Materials (DynMatCel’2017), MatCel’2017 & DynMatCel’2017, Aveiro, Portugal
2017 | conference-abstract
Strengthening of ceramic scaffolds infiltrated with bioactive glass 58S
European Congress and Exhibition on Advanced Materials and Processes, EUROMAT 17-22, Thessaloniki, Greece
2017 | conference-abstract
Wear and ageing behaviour of porous zirconia layers
National Conference on Cellular Materials (MatCel’2017) along with the International Conference of Dynamic Behaviour of Cellular Materials (DynMatCel’2017), MatCel’2017 & DynMatCel’2017, Aveiro, Portugal
2017 | conference-abstract
Anti-biofilm properties of bioactive glasses embedding organic active compounds
Journal of Biomedical Materials Research - Part A
2017 | journal-article
Impact of coloring/fluorescence-liquids and aging on fracture resistance of zirconia
Dental Materials
2017 | conference-paper
Influence of interlayer design on residual thermal stresses in trilayered and graded all-ceramic restorations
Materials Science and Engineering C
2017 | journal-article
Influence of surface conditioning using laser ablation on bonding strength between PEEK and dental resin
Sociedade Brasileira de Pesquisa em Materiais (SPBMat)
2017 | conference-poster
Influence of the thermal treatment and particle size of Ce-TZP and Y-TZP mixtures, for dental application
European Congress and Exhibition on Advanced Materials and Processes, EUROMAT
2017 | conference-poster
Inhibition of multi-species oral biofilm by bromide doped bioactive glass
Journal of Biomedical Materials Research - Part A
2017 | journal-article
MG-63 Osteoblast-like cell adhesion on Zirconia Scaffolds coated with Bioactive Glasses 58S
5th IBTN Day, Institute of Biomaterials, Tribocorrosion and Nanomedicine
2017 | conference-poster
Mechanical and microstructural properties of PEEK embedding bioactive glasses
Sociedade Brasileira de Pesquisa em Materiais (SPBMat)
2017 | conference-poster
Mechanical properties of layered zirconia to zirconia-hydroxyapatite or zirconia-ß-TCP composites for biomedical applications
MATERIAIS 2017, XVIII Congresso da Sociedade Portuguesa de Materiais and VIII International Symposium on Materials
2017 | conference-poster
Mechanical properties of zirconia with an outer layer of zirconia-hydroxyapatite or zirconia-beta-tricalcium phosphate composites for biomedical applications
5th IBTN Day, Institute of Biomaterials, Tribocorrosion and Nanomedicine
2017 | conference-poster
New perspectives for recycling dental zirconia waste resulting from CAD/CAM manufacturing process
Journal of Cleaner Production
2017 | journal-article
Processing and strengthening of 58S bioactive glass-infiltrated titania scaffolds
Journal of Biomedical Materials Research - Part A
2017 | journal-article
Thermal residual stresses in bilayered, trilayered and graded dental ceramics
Ceramics International
2017 | journal-article
Optimization of a Carbon Nanodots (CNDs) synthesis and development of CND's fluorescent coatings based on SiO2 sol-gel for dental applications
2016 | data-set
Processamento de arcabouços em zircônia revestidos com vidro bioactivo 58S
2016 | data-set
Analysis of residual thermal stress in layered zirconia/porcelain discs for dental applications
XV Brazilian MRS, Proceedings of the XV Brazilian MRS, Campinas, Brazil
2016 | conference-abstract
Analysis of residual thermal stress in layered zirconia/porcelain discs for dental applications
XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting
2016 | conference-poster
Centre for Mechanical Technology and Automation (TEMA) https://www.ua.pt/pt/tema
2016 | website
Characterization of dental zirconia waste resulting from CAD/CAM manufacturing process
22º Congresso Brasileiro de Engenharia e Ciência dos Materiais CBECIMAT
2016 | conference-abstract
FEM and analytical analysis of the bending stress distribution in graded zirconia-based dental ceramics
ISFGM2016 - 14th International Symposium on Functionally Graded Materials
2016 | conference-paper
FEM and analytical analysis of the bending stress distribution in graded zirconia-based dental ceramics
ISFGM2016 - 14th International Symposium on Functionally Graded Materials, 2016, Bayreuth, Germany
2016 | conference-paper
Hybrid scaffolds composed of β-TCP, PDLLA, and collagen for alveolar bone augmentation
Clinical Oral Implants Research
2016 | conference-paper
Processing and characterization of new material obtained from dental zirconia residue of CAD/CAM blanks
XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting
2016 | conference-poster
Processing of oyster shells for industrial application
23º Congresso Brasileiro de Engenharia e Ciência dos Materiais
2016 | conference-poster
Production of zirconia porous structures by dip coating method
XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting
2016 | conference-poster
The bending stress distribution in bilayered and graded zirconia-based dental ceramics
Ceramics International
2016 | journal-article
Optimization of Pechini synthesis and characterization of Ce-TZP and Y-TZP mixtures using commercial and Pechini powders
2015 | data-set
Alternative thermal treatment for Y-TZP and Ce-TZP composites
2015 | data-set
Synthesis and powder processing of 58S bioactive glass doped with bromide
2015 | data-set
Characterization of Noble Metallic Thin Coatings on Lead Glass substrates
Materiais 2015 VII International Materials Symposium/XVII Conference of Sociedade Portuguesa dos Materiais, Porto , Portugal
2015 | conference-abstract
Cerâmica celular de titânia para reconstituição óssea
Congresso dos Estudantes de Ciência e Engenharia de Materiais do Mercosul (CECEMM), UFSCar, São Carlos
2015 | conference-abstract
Evaluation of biaxial stress moment for bilayered and graduated discs using finite element method
New frontiers on biomaterials for bone regeneration, XIV Encontro da SBPMat Rio de Janeiro
2015 | conference-poster
Functionally Graded Materials in Dentistry
Advances in Materials Science Research.
2015 | book-chapter
Hydrothermal degradation of 3Y-TZP and 12Ce-TZP laser sintered for dental applications
14th International Conference of European Ceramic Society (ECERS)
2015 | conference-poster
Mechanical characterization of trilayered all-ceramic dental restorations
New frontiers on biomaterials for bone regeneration, XIV Encontro da SBPMat Rio de Janeiro
2015 | conference-poster
Stress analysis on all-ceramic specimens of different geometries during thermal cycling tests
COMSOL Conference Curitiba
2015 | conference-poster
Effect of aging on the onset of cracks due to redistribution of residual stresses in functionally graded environmental barrier coatings of mullite/ZrO2
2014 | journal-article
The behaviour of Zirconia/Mullite multilayer coatings designed as EBC under water vapour and high-temperature conditions
Universidad Autónoma de Madrid
2012 | dissertation-thesis
Mullite-YSZ multilayered environmental barrier coatings tested in cycling conditions under water vapor atmosphere
2012 | journal-article
Performance of Multilayered Mullite-Based EBCs in Simulated Working Conditions
International Thermal Spray Conference & Exposition (ITSC 2011)
2011 | conference-paper
Mechanical behavior of air plasma-sprayed YSZ functionally graded mullite coatings investigated via instrumented indentation
2011 | journal-article
Phase composition and microstructural responses of graded mullite/YSZ coatings under water vapor environments
2011 | journal-article
Porous mullite and mullite-ZrO2 granules for thermal spraying applications
2011 | journal-article
Mechanical Behaviour of mullite-based multilayer coatings EBC corrosion under Conditions
50th Annual Congress of the Spanish Society of Ceramics and Glass (SECV), Madrid, Spain
2010 | conference-abstract
Water-based corrosion of mullite multilayer EBC coatings
11th International Conference on Modern Materials and Technologies (CIMTEC 2010) Montecatini Terme, Italy
2010 | conference-abstract
Phase Composition and microstructural responses of crystalline mullite / YSZ coating under water steam environments
International Thermal Spray Conference & Exposition (ITSC 2010), Proceeding of the 33th International Thermal Spray Conference & Exposition, Singapore,
2010 | conference-abstract
Crystallization studies in mullite and mullite-YSZ beads
2010 | journal-article
Mullite and mullite/ZrO 2-7wt.%Y 2O 3 powders for thermal spraying of environmental barrier coatings
2010 | journal-article
Thermal conductivity in mullite/ZrO2 composite coatings
2010 | journal-article
Powder Processes conditioning for thermal spraying
Shaping 4 Fourth International Conference on Advanced Ceramics Shaping, Madrid, Spain
2009 | conference-abstract
Procedimiento de obtención de material cerámico de aporte para técnicas de proyección térmica
2009 | patent
Procedimiento de obtención de material cerámico de aporte para técnicas de proyección térmica
2009 | patent
Crystallization studies on thermal sprayed Mullite and Mullite - YSZ
11th International Conference and Exhibition of the European Ceramic Society, Krakow, Poland
2009 | conference-abstract
Mullite Coatings Produced by APS and SPS: Effect of Mullite Powder Spray Processing and Morphology on the microstructure, Crystallinity and Mechanical Properties
International Thermal Spray Conference & Exposition (ITSC 2009), Proceeding of the 32th International Thermal Spray Conference & Exposition, Las Vegas, USA
2009 | conference-abstract
Mullite and Mullite/ZrO2-7wt% Y2O3 powders for Thermal Barrier Coatings Spraying of Environmental
International Thermal Spray Conference & Exposition (ITSC 2009), Proceeding of the 32th International Thermal Spray Conference & Exposition, Las Vegas, USA
2009 | conference-abstract
Mullite and mullite/ZrO2-7wt%Y2O3 powders for thermal spraying of environmental barrier coatings
2009 | conference-paper
Mullite coatings produced by APS and SPS: Effect of powder morphology and spray processing on the microstructure, crystallinity and mechanical properties
2009 | conference-paper
Evolution of the granulometry of calcite in the grinding of hard raw materials for monoporous paste
Universidade de Aveiro
2007 | data-set
Evolution of the granulometry of calcite in the grinding of hard raw materials for monoporous paste
2007 | dissertation-thesis
Determination of porosity of porous ceramic tiles for adjusting the thermal conductivity and thermal comfort
Universidade de Aveiro
2005 | data-set
Determination of porosity of porous ceramic tiles for adjusting the thermal conductivity and thermal comfort
Universidade Federal de Santa Catarina
2005 | dissertation-thesis
Development of novel zirconia implant’s materials gradated design with improved bioactive surface
Journal of the Mechanical Behavior of Biomedical Materials
| journal-article
Evaluation of in vitro properties of 3D micro-macro porous zirconia scaffolds coated with 58S bioactive glass using MG-63 osteoblast-like cells
| journal-article
Production and characterization of zirconia structures with a porous surface
Materials Science and Engineering: C
| journal-article
Shear bond strength of PEEK and PEEK-30GF cemented to zirconia or titanium substrates
Journal of Adhesion Science and Technology
| journal-article
Sliding behavior of zirconia porous implant surfaces against bone
Journal of Biomedical Materials Research – Part B: Applied Biomaterials
| journal-article
